• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.95-100
• /
• 2009

This study was conducted to develop an imaging processing system of inoculation processing of a lily callus. The image processing system was composed of a camera, a image processing board, and etc. And the illuminance always decided by setting up 55W/3 wavelength lamp respectively on all aspects and the side was maintained by the lighting part. The image characteristic was examined according to each frame of RGB,therefore the culture vessel was able to be separated with B frame. The required time was 2.2 seconds in one cycle from the image acquisition to obtaining the result. The recognition rate of the container was 100%, and the result of image processing showed that the recognition success rate of lily callus was 93%.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.100-106
• /
• 2001

The size distributions of electrospray droplets from the Taylor cone in cone-jet mode are directly measured by using a freezing method and a transmission electron microscope (TEM) image processing technique. These results are compared with the data obtained by an aerodynamic size spectrometer (TSI Aerosizer DSP). The use of glycerol seeded with NaI and a freezing method make it possible to sample droplets with their original sizes preserved. Since pictures of droplets are taken with TEM with very low vapor pressure of the solution, evaporation is suppressed by freezing. For liquid flow rates below 1 nl/sec, the measured droplet diameters by the TEM image processing technique and the aerosizer are in the range of 0.25 to $0.32{\mu}m$ and 0.30 to $0.40{\mu}m$, respectively. Comparing the TEM data with the aerosizer measurements, it has been revealed that the TEM image processing technique can afford more accurate values of droplet size distributions in the submicron range of 0.1 to $0.4{\mu}m$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.8
• /
• pp.1152-1163
• /
• 1998

In the present work, the image processing technique for measurement of drop sizes has been improved. Firstly, the local processing concept was adopted in addition to the global processing technique to take account of non-uniformity of the illumination intensity ; thereby, basically, the measurement error can be reduced. Also, the unfocussed image of drops can be eliminated more precisely since the elimination process is based on the local normalized contrast. Secondly the algorithms to process the partially detected or overlapped drop images and the non-spherical drop images were developed. Finally, the improved algorithm was tested by using an artificially prepared image-frame, where the partial or overlapped particles and the non-spherical particles are mixed with the normal spherical ones (with their true size-distributions known a priori). The results showed that both the recognition rate of the number of particles and the measurement accuracy were improved prominently.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.169-175
• /
• 2011

In this paper, an automatic scoring system of the OMR answer sheet is implemented using Gray Scale and image segmentation method. The proposed method was used to extract the OMR data on multiple-choice answer sheet from captured image. In addition, On-line scoring system is developed and implemented to mark the short-answer type on the reverse side. Therefore, teachers can mark the short-answer type for anytime and anywhere within the available time. There were many advantages to mark of the multiple-choice answer sheet without additional OMR reader. In the future, the grading of short-answer type will be more efficient if it were performed by using an automatic scoring system based on image processing.

• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.189-193
• /
• 2006

In this study we propose an automatic reading system for diagnostic DNA chips. We define a general specification for an automatic reading system and propose a possible implementation method. The proposed system performs the whole reading process automatically without any user intervention, covering image acquisition, image analysis, and report generation. We applied the system for the automatic report generation of a commercialized DNA chip for cervical cancer detection. The fluorescence image of the hybridization result was acquired with a $GenePix^{TM}$ scanner using its library running in HTML pages. The processing of the acquired image and the report generation were executed by a component object module programmed with Microsoft Visual C++ 6.0. To generate the report document, we made an HWP 2002 document template with marker strings that were supposed to be searched and replaced with the corresponding information such as patient information and diagnosis results. The proposed system generates the report document by reading the template and changing the marker strings with the resultant contents. The system is expected to facilitate the usage of a diagnostic DNA chip for mass screening by the automation of a conventional manual reading process, shortening its processing time, and quantifying the reading criteria.

• Journal of ILASS-Korea
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2001

Previous studies on image processing techniques for panicle size measurement usually have focused on a single panicle or weakly overlapped particles. In the present work, the image processing algorithm for particle size measurement has been improved to process heavily-overlapped spherical-particle images. The algorithm consists of two steps; detection of boundaries which separate the images of the overlapped panicles from the background and the panicle identification process. For the first step, Sobel operator (using gray-level gradient) and the thinning process was adopted, and compared with the gray-level thresholding method that has been widely adopted. In the second, Hough transform was used. Hough transform is the detection algorithm of parametric curves such as straight lines or circles which can be described by several parameters. To reduce the measurement error, the process of finding the true center was added. The improved algorithm was tested by processing an image frame which contains heavily overlapped spherical panicles. The results showed that both the performances of detecting the overlapped images and separating the panicle from them were improved.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.17 no.3
• /
• pp.233-240
• /
• 2013

Objectives The objective and universal grading system for the facial nerve palsy is needed to the objectification of treatment in Oriental medicine. In this study, the facial nerve palsy grading was developed with combination of image processing technique and Nottingham scale. Methods The developed system is composed of measurement part, image processing part, facial nerve palsy evaluation part, and display part. With the video data recorded by webcam at measurement part, the positions of marker were measured at image processing part. In evaluation part, Nottingham scales were calculated in four different facial expressions with measured marker position. The video of facial movement, time history of marker position, and Nottingham scale were displayed in display part. Results & Conclusion The developed system was applied to a normal subject and a abnormal subject with facial nerve palsy. The left-right difference of Nottingham scores was large in the abnormal compared with the normal. In normal case, the change of the length between supraorbital point and infraorbital point was larger than that of the length between lateral canthus and angle of mouth. The abnormal case showed an opposite result. The developed system showed the possibilities of the objective and universal grading system for the facial nerve palsy.

• Journal of Practical Engineering Education
• /
• v.6 no.2
• /
• pp.85-89
• /
• 2014

A variety of robot education comes out. However, robot associated with the image processing is insufficient. And it is difficult to various education through a robot. Image processing educational robot that is proposed is made by module type hardware, so it's convenient to assemble according to educational purposes with the robot. In image processing, the robot recognizes color and pattern and calculates angle and control four motors. Using the robot, you can learn image processing, how to use MCU and Encoder, related programs and motor control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.648-661
• /
• 1997

This paper presents a new method for post-processing of coded images based upon the low-pass filtering followed by the projection onto the NQCS (narrow quantization constraint set). We also investigate how the proposed method works on JPEG-coded real images. The starting point of the QCS-based post-processing techniques is the centroid of the QCS, where the original image belongs. The low-pass filtering followed by the projection onto the QCS makes the images lie on the boundary of the QCS. It is likely that, however, the original image is inside the QCS. Hence projection onto the NQCS gives a lower MSE (mean square error) than does the projection onto the QCS. Simulation results show that setting the narrowing coefficients of the NQCS to be 0.2 yields the best performance in most cases. Even though the JPEG-coded image is low-pass filtered and projected onto the NQCS repeatedly, there is no guarantee that the resultant image has a lower MSE and goes closer to the original image. Thus only one iteration is sufficient for the post-processing of the coded images. This is interesting because the main drawback of the iterative post-processing techniques is the heavy computational burden. The single iteration method reduces the computational burden and gives us an easy way to implement the real time VLSI post-processor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.98-103
• /
• 2010

In this paper, imaging processing study obtained from CCD image and thermography image was performed in order to treat easily thermographic data without any risks of personnels who conduct the condition monitoring for the abnormal or failure status occurrable in industrial power plants. This imaging processing is also applicable to the predictive maintenance. For confirming the broad monitoring, a methodology producting single image from the panorama technique was developed no matter how many cameras are employed, including fusion method for discrete configuration for the target. As results, image fusion from quick realtime processing was obtained and it was possible to save time to track the location monitoring in matching the images between CCTV and thermography.