• Tuberculosis and Respiratory Diseases
• /
• v.40 no.2
• /
• pp.135-146
• /
• 1993

Background: In acute pulmonary embolism it has been postulated that the constriction of bronchi and pulmonary artery secondary to neurohumoral response plays an important role in cardiopulmonary dysfunction in addition to the mechanical obstruction of pulmonary artery. Serotonin is considered as the most important mediator. Positive end expiratory pressure (PEEP) stimulates $PGI_2$ secretion from the vascular endothelium, but its role in acute pulmonary embolism is still in controversy. Methods: To study the cardiopulmonary effect and therapeutic role of Ketanserin, selective antagonist of 5-HT2 receptor, and PEEP in acute pulmonary embolism experimental acute pulmonary embolism was induced in dogs with autologous blood clot. The experimental animals were divided into 3 groups, that is control group, Ketanserin injection group and PEEP application group. Results: Thirty minutes after embolization, mean pulmonary arterial pressure and pulmonary vascular resistance increased and cardiac output decreased. $PaO_2,\;P\bar{v}O_2$ and oxygen transport decreased and physiological shunt and $PaCO_2$ increased. After injection of Ketanserin, comparing with control group, mean pulmonary arterial pressure, pulmonary vascular resistance and physiological shunt decreased, while cardiac output, $PaO_2$ and oxygen transport increased. All these changes sustained till 4 hours after embolization. After PEEP application pulmonary vascular resistance, $PaO_2$ and $PaCO_2$ increased, while physiological shunt, cardiac output and oxygen transport decreased. After discontinuation of PEEP, mean pulmonary arterial pressure and pulmonary vascular resistance decreased and were lower than control group, while $PaO_2$ and cardiac output increased and higher than control group. $PaCO_2$ decreased but showed no significant difference comparing with control group. Conclusion: It can be concluded that Ketanserin is effective for the treatment of acute pulmonary embolism. With PEEP hemodynamic status deteriorated, but improved better than control group after discontinuation of PEEP. Thus PEEP may be applied carefully for short period in acute pulmonary embolism if the hemodynamic status is tolerable.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.923-933
• /
• 1995

Background: Pleural abnormality is the the most common respiratory change caused by asbestos dust inhalation and also develop other asbestos related disease after cessation of asbestos exposure. So we conducted epidemiologic study to investigate if the pleural abnormality is associated with pulmonary function change and what factors are influenced on pulmonary function impairment. Methods: Two hundred and twenty two asbestos workers from 9 industries using asbestos in Korea were selected to measure the concentration of sectional asbestos fiber. Ouestionnaire, chest X-ray, PFT were also performed. All the data were analyzed by student t-test and chi-square test using SAS. Regressional analysis was performed to evaluate important factors, for example smoking, exposure concentration, period and the existence of pleural thickening, affecting to the change of pulmonary function. Results: 1) All nine industries except two, airborn asbestos fiber concentration was less than an average permissible concentration. PFT was performed on 222 workers and the percentage of male was 88.3%, their mean age was $41{\pm}9$ years old, and the duration of asbestos exposure was $10.6{\pm}7.8$ yrs. 2) The chest X-ray showed normal(89.19%), pulmonary Tb(inactive)(2.7%), pleral thickening (7.66%), suspected reticulonodular shadow(0.9%). 3) The mean values of height, smoking status, concentration of asbestos fiberwere not different between the subjects with pleural thickening and others, but age, cumulative pack-years, the duration of asbestos exposure were higher in subjects with pleural thickening. 4) All the PFT indices were lower in the subjects with pleural thickening than in the subjects without pleural thickening. 5) Simple regression analysis showed there was a significant correlation between $FEF_{75}$ which is sensitive in small airway obstruction and cumulative smoking pack-years, the duration of asbestos exposure and the concentration of asbestos fiber. 6) Multiple regression analysis showed all the pulmonary function indices were decreased as the increase of cumulative smoking pack-years and especially in the indices those are sensitive in small airway obstruction. Pleural thickening was associated with reduction in FVC, $FEV_1$, PEFR and $FEF_{25}$. Conclusion: The more concentration of asbestos fiber and the more duration of asbestos exposure, the greater reduction in $FEF_{50}$, $FEF_{75}$. Therefore PFT was important in the evaluation of early detection for small airway obstruction. Furthermore pleural thickening without asbesto-related parenchymal lung disease is associated with reduction in pulmonary function.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.5
• /
• pp.713-722
• /
• 1995

Background: Chest X-ray of coal workers' pneumoconiosis and shipyard welders' lung show similar and regular opacities mostly, it is very difficult that we distinguish the former from the latter by only chest X-ray. so we performed this study to understand the progression of the disease and to provide the disease by considering pulmonary function and other factors in proportion to the profusion of small regular opacities of chest X-ray in both groups. Method: 430 coal workers' pneumoconiosis were compared with 311 shipyard welders' lung by the number, the age, the duration of dust exposure, %vital capacity(%VC), %FEV1.0, the type of ventilatory impairment, the combined pulmonary disease according to the profusion of small regular opacities on the chest radiographs, which were classified into category 0/1, category 1, and category 2. Result: 1) the percent of category 2 in coal workers' pneumoconiosis was 54.4%. the percent of category 1, and category 2 in welders' lung were 60.0%, 7.4%. the progression to the category 2 was higher in coal workers' pneumoconiosis than in welders' lung 2) The mean age was higher in coal workers' pneumoconiosis than in welders' lung, significantly increased in proportion to the progresion of profusion of small regular opacities in both groups 3) There was no difference in the duration of dust exposure by category 1/0, but the duration of dust exposure by category 1, 2 in coal workers' pneumoconiosis more significantly increased than in welders' lung. the duration in the proportion of category 2 to category 0/1, 1 significantly increased in the proportion to small regular opacities in coal workers' pneumoconiosis. but there was no significant difference in the proportion to small regular opacities in duration of dust exposure in welders' lung. 4) There was no significant difference of mean values of %VC(%vital capacity)in both groups except for category 1. the mean values of %VC had no relationship between the progression of small regular opacities in both groups. 5) The mean values of %FEV1.0 decreased more significantly in coal workers' pneumoconiosis than in welders' lung except for category 0/1. and decreased significantly in proportion to the profusion of small regular opacities in coal workers' pneumoconiosis. there was significant difference of %FEV1.0 in the proportion of category 2 to category 011 in welders' lung. 6) there were no significant difference of %FEV1.0, %VC in smoker and nonsmoker in both groups. 7) With regard to the type of ventilation in both groups in coal workers' pneumoconiosis 21.4 percent of patients belonged to the restrictive type, 11.6 percent to the obstructive type, 5.6 percent to the combined type, but in welders' lung 21.8 percent to the restrictive type, 2.9 percent to the obstructive type, 1.9 percent to the combined type. 8. in the pulmonary disease, the incidence of the pulmonary tuberculosis was the most in both groups, was more in coal workers' pneumoconiosis than welders' lung Conclusion: If we compare coal workers' pneumoconiosis with electric arc welders'lung by considering pulmonary function and other factors in proportion to the profusion of chest X-ray, I think that we will have the better result in understanding the progression of the disease and provision of the disease in both groups.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.290-300
• /
• 1998

Background: CYFRA 21-1 is a tumor marker which measures a fragment of cytokeratin 19 expressed by epithelial cells in bronchus. It is known that cytokeratin 19 is abundant in squamous epithelial cell cancer of the lung. However, if the incidence of elevated serum CYFRA 21-1 level in patients with benign lung diseases or pulmonary tuberculosis with severe parenchymal damage is high the specificity of CYFRA 21-1 could be decreased. The purpose of this study is to investigate the changes of serum CYFRA 21-1 according to the degree of parenchymal damage and the usefulness of CYFRA 21-1 for diagnosing possibly combined lung cancer in patients with pulmonary tuberculosis. Method: We studied the changes of serum CYFRA 21-1 according to the sputum AFB stain, radiologic manifestation and history of treatment in 81 patients with pulmonary tuberculosis, and 20 healthy persons, 25 patients with lung cancer, as a control group. CYFRA 21-1 concentration in serum was quantified by the immunoradiometry assay(Centocor$^{(R)}$). Result: The results were as follow; Serum CYFRA 21-1 level was significantly lower in patients with pulmonary tuberculosis($1.54{\pm}1.19ng/mL$, p<0.01) as compared to patients with lung cancer($12.25{\pm}15.97ng/mL$), and was slightly higher than the level in heathy persons($0.90{\pm}0.49ng/mL$) but there was no significant difference. Serum CYFRA 21-1 level was below the cut-off value of 3.3ng/mL in 95 percent of patients with pulmonary tuberculosis but it was above the cut-off value in 64 percent of patients with lung cancer. Serum CYFRA 21-1 level was significantly higher in the initial treatment group($1.91{\pm}1.55ng/mL$, p<0.05) as compared to the treatment. failure group ($0.92{\pm}0.30ng/mL$). According to the sputum AFB smear, serum CYFRA 21-1 level in patients with negative result was slightly higher than the level in patients with positive result but there was no significant difference. According to the radiologic manifestation, serum CYFRA 21-1 level was significantly higher in patients with infiltrative lesion ($2.15{\pm}1.63ng/mL$, p<0.01) as compared to patients with destructive lesion ($l.04{\pm}0.54ng/mL$). As the size of cavity or destructive lesion was larger, the level was significantly lower(p<0.05). Conclusion: As serum CYFRA 21-1 level was significantly higher in the initial treatment group and patients with infiltrative lesion, it suppose to be closely related with the degree of parenchymal damage of the lung of the pulmonary tuberculosis. However CYFRA 21-1 could be useful method for diagnosing lung cancer even in patients with pulmonary tuberculosis combined with lung cancer because of the fact that it was below the cutoff value of 3.3ng/mL in 95 percent of patients with pulmonary tuberculosis.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.1058-1066
• /
• 1998

Background: Actinomycotic infection is uncommon and primary actinomycosis of the lung and chest wall has been less frequently reported. This disease may present as chronic debilitating illness with radiologic manifestation simulating lung tumor, pulmonary infiltrating lesion, or chronic suppuration. Diagnosis of choice was not definded yet and role of bronchoscopy on diagnosis was not described yet. Methods: From 1989 to 1998, we experienced 17 cases of thoracic actinomycosis. We have reviewed the case notes of 17 patients with thoracic actinomycosis. The mean age at presentation was $53{\pm}13$ years, 11 were male. Results: Cough, hemoptysis, sputum production, chest pain and weight loss were the commonest symptoms. The mean delay between presentation and diagnosis was $6.6{\pm}7.8$ months. There were six patients who presented with a clinical picture of a suppurative lesion and eleven patients were suspected of having primary lung tumor initially. In no cases was made an accurate diagnosis at the time of hospital admission. Associated diseases were emphysema (1 case), bronchiectasis (2 cases) and tuberculosis (2 cases). Bronchoscopic findings were mucosal swelling and stenosis(n=4), mucosal swelling, stenosis and necrotic covering (n=2), mass (n=3), mass and necrotic covering (n=1) and normal(n=6). Radiologic findings were mass lesion(n=8), pneumonitis(n=3), atelectasis(n=3), pleural effusion(n=2), and normal(n=3). Final diagnosis was based on percutaneous needle aspiration and biopsy (n=3), bronchoscopic biopsy specimens (n=9), mediastinoscopic biopsy (n=1) and histologic examination of resected tissue in the remaining patients(n=4) who received surgical excision. Among 17 patients, 13 were treated medically and the other 4 received surgical intervention followed by antibiotic treatment. Regarding the surgically treated patients, suspected malignancy is the most common indication for operation. However. both medically and surgically treated patients achieved good clinical results. Conclusion: Thoracic actinomycosis is rare. but should still be considered in the differential diagnosis of a chrinic, localized pulmonary lesion. Thoracic actinomycosis may co-exist with pulmonary tuberculosis or lung cancer. If the lesion is located in the central of the lung. the bronchoscopy is recommanded for the diagnosis.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.1012-1021
• /
• 1998

Background : It is known that airway inflammation is present in most patients with asthma, but the relationship between symptoms and the severity and nature of airway inflammation has not been established. Cough variant asthma is defined as an asthma in which the dominant symptom is cough, and the condition can be successfully treated with inhaled steroids. This study was performed to evaluate the time course of bronchial responsiveness according to an inhaled anti-inflammatory therapy and the factors which affect the resolution of bronchial responsiveness, and an efficacy of nedocromil to cough asthma. Method: A prospective study for the investigation of bronchial responsiveness according to an inhaled anti-inflammatory treatment in sixty-one cough asthmatics was performed. Twenty-three entered budesonide ($400{\mu}g{\times}2/day$), twenty-two entered nedocromil ($4mg{\times}2/day$) and sixteen patients entered combined group. The bronchial hyperresponsiveness (BHR) was estimated by methacholine challenge test using counted breath method. The symptom was estimated by 'symptom score'. Reevaluation of BHR and symptom was performed at 2 month after treatment, and if BHR was not resoluted at this time, regarded as a non-responder, and then follow-up of BHR and symptom was performed at 4- and/or 6 month after treatment. Results: The improvement of BHR and symptom was significant in 2 month (p<0.05), but there was no change of them during follow-up period of 4- and/or 6 month in non-responders. In comparison of allergic markers such as serum total IgE, peripheral eosinophil count and skin test reactivity between responders and non-responders, there was no difference in each other. However, in comparison of other factors such as cumulative pack-years, symptom duration, age, gender, and the initial degree of PC20, there was a significant difference in each other(p<0.05). The percent of patients with the resolution of BHR in 2 month was not different in each group(p=0.95). There was no significant difference in the degree of improvement of BHR and symptom in each group. Conclusion: Bronchial responsiveness and symptom was not significantly improved in non-responders during follow-up period of 4- and/or 6 month. The effect of inhaled nedocromil was equivalent to that of inhaled steroid in cough asthmatics, and the response to combined treatment is not superior to that achieved by either of these agents used alone.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.156-163
• /
• 2009

Statement of problem: Recently, there have been increased esthetic needs for posterior dental restorations. The failure of posterior dental ceramic restoration are possible not only by the characters of the component materials but also by the type of food. Purpose: The research aim was to compare the in vitro fracture resistance of simulated first molar crowns fabricated using 4 dental ceramic systems, full-porcelain-occlusal-surfaced PFG, half-porcelain-occlusal-surfaced PFG, Empress 2, Ice Zirkon and selected Korean foods. Material and methods: Eighty axisymmetric crowns of each system were fabricated to fit a preparation with 1.5- to 2.0-mm occlusal reduction. The center of the occlusal surface on each of 15 specimens per ceramic system was axially loaded to fracture in a Instron 4465, and the maximum load(N) was recorded. Afterwards, selected Korean foods specimens(boiled crab, boiled chicken with bone, boiled beef rib, dried squid, dried anchovy, round candy, walnut shell) were prepared. 15 specimens per each food were placed under the Instron and the maximum fracture loads for them were recorded. The 95% confidence intervals of the characteristic failure load were compared between dental ceramic systems and Korean foods. Afterwards, on the basis of previous results, 14Hz cyclic load was applied on the 4 systems of dental ceramic restorations in MTS. The reults were analyzed by analysis of variance and Post Hoc tests. Results: 95% confidence intervals for mean of fracture load 1. full porcelain occlusal surfaced PFG Crown: 2599.3 to 2809.1 N 2. half porcelain occlusal surfaced PFG Crown: 3689.4 to 3819.8 N 3. Ice Zirkon Crown: 1501.2 to 1867.9 N 4. Empress 2 Crown: 803.2 to 1188.5 N 5. boiled crab: 294.1 to 367.9 N 6. boiled chicken with bone: 357.1 to 408.6 N 7. boiled beef rib: 4077.7 to 4356.0 N 8. dried squid: 147.5 to 190.5 N 9. dried anchovy: 35.6 to 46.5 N 10. round candy: 1900.5 to 2615.8 N 11. walnut shell: 85.7 to 373.1 N under cyclic load(14Hz) in MTS, fracture load and masticatory cycles are: 1. full porcelain occlusal surfaced PFG Crown fractured at 95% confidence intervals of 4796.8-9321.2 cycles under 2224.8 N(round candy)load, no fracture under smaller loads. 2. half porcelain occlusal surfaced PFG Crown fractured at 95% confidence intervals of 881705.1-1143565.7 cycles under 2224.8 N(round candy). no fracture under smaller loads. 3. Ice Zirkon Crown fractured at 95% confidence intervlas of 979993.0-1145773.4 cycles under 382.9 N(boiled chicken with bone). no fracture under smaller loads. 4. Empress 2 Crown fractured at 95% confidence intervals of 564.1-954.7 cycles under 382.9 N(boiled chicken with bone). no fracture under smaller loads. Conclusion: There was a significant difference in fracture resistance between experimental groups. Under single load, Korean foods than can cause fracture to the dental ceramic restorations are boiled beef rib and round candy. Even if there is no fracture under single load, cyclic dynamic load can fracture dental posterior ceramic crowns. Experimental data with 14 Hz dynamic cyclic load are obtained as follows. 1. PFG crown(full porcelain occlusion) was failed after mean 0.03 years under fracture load for round candy(2224.8 N). 2. PFG crown(half porcelain occlusion) was failed after mean 4.1 years under fracture load for round candy(2224.8 N). 3. Ice Zirkon crown was failed after mean 4.3 years under fracture load for boiled chicken with bone(382.9 N). 4. Empress 2 crown was failed after mean 0.003 years under fracture load for boiled chicken with bone(382.9 N).

• Journal of the Speleological Society of Korea
• /
• no.68
• /
• pp.23-73
• /
• 2005

Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(${\pm}100m$). Accordingly, we can recognize the three-parts of erosion surface including the medium level landform surface (500-600m) in this area. (see table 22). In condition with the alluvial surfaces I have classified as two landform surfaces (old and new) which was regarded as one face in past. Meamwhile, under the premise of land use, the synthetic, micro morphological classification based upon the land condition is as per the draw No. 19-1. This is the quite new method of classification which was at first attempted in this country. 2. I have learned that the change of river was most severe at seeing the river meandering rate from Dangjung-ni to Nanjido. As you seee the table and the vertical and horizontal change of river beds is justly proportionable to the river meandering rate. 3. It can be learned at seeing the analysis of component materials of alluvial deposits that the component from each other by areas, however, in the deposits relationship upper stream, and between upper parts and below parts I couldn't always find out the regular ones. 4. Having earthern vessel, shell bone, fossil charcoal and and seaweeds includen in the component materials such as gravel, clay, sand and silt in Dukso and Songpa deposits area. I have become to attempt the compilation of chronicle as yon see in the table 22. 5. In according to hearing of basemen excavation, the bottom set conglomerate beds of Dukso beds of Dukso-beds is 7m and Songpa-beds is 10m. In according to information of dredger it is approx. 20m in the down stream. 6. Making these two beds as the standard beds, I have compared it to other beds. 7 The coarse sand beds which is covering the clay-beds of Dukso-beds and Nanjidobeds is shown the existence of so-called erosion period which formed the gap among the alluvial deposits of stratum. The former has been proved by the sorting, bedding and roundness which was supplied by the main stream and later by the branch stream, respectively. 8. If the clay-beds of Dukeo-bed and Songpa-bed is called as being transgressive overlap, by the Eustatic movement after glacial age, the bottom set conglomerate beds shall be called as being regressive overlap at the holocene. This has the closest relationship with the basin formation movement of Seoul besides the Eustatic movement. 9. The silt-beds which is the main component of deposits of flood plain, is regarded as being deposited at the Holocene in the comb ceramic and plain pottery ages. This has the closest relationship with the change of river course and river beds.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.177-187
• /
• 2002

In our experiment, selected mutants were used which showed not only the phenotype of a specific unpolished rice but also phenotypes of EM 40, LO 1050, and TAL 214. Reciprocal crosses between the mutants were conducted to select strains which would have more quantity of lipids than before. The constitution of fatty acid was also tested to figure out nutritional aspects of the mutants. In the crossing between EM 40 mutants and mutants (LO 1050) having a thick aleurone layer, the expression of EM 40 mutants has no relation with the thickness of the aleurone layer. And the lipid content of new F$_2$ strains through the crossing is 4.15 ％. The lipid content is larger than those of the parents including Kinmaze and in other crossings of this experiment. This is attributed to the fact that the new F$_2$ strains are the products of the crossing between genes responsible for the size of buds, where lipid is accumulated, and genes accountable for the thickness of the aleurone layer. In the crossing between EM 40 mutants and TAL 214 mutants, lipid content of the new F$_2$ strains is 3.8 ％, higher than 2.92 ％ of TAL 214 mutants. But the degree of lipid increase is smaller than in two other crossings. This is probably because genes expressing the phenotypes of TAL 214 affect the size of EM 40, which gets smaller. The aleurone layer of the new F$_2$ strains is 12 $\mu\textrm{m}$ thicker than the layer of TAL 214 mutants, but 6 $\mu\textrm{m}$ thinner than that of parents (LO 1050) having a thick aleurone layer. This seems to be affected by the size of a microscope. The phenotype of the new F$_2$ strains appears to be similar to that of TAL 214. The lipid content of the new F$_2$ strains is 3.85 ％, larger than 2.92 ％ of TAL 214 and 3.01 % of LO 1050. The increase may be due to the aleurone layer of LO 1050. And the size of the bud of the unpolished rice, though it is not big enough like that of LO 1050, seems to be affected by the accumulation of genes in the thick aleurone layer. The accumulation may contribute to the increase in the content of lipid. When it comes to the constitution of fatty acid, there is little difference between parents like Kinmaze and the new F$_2$ strains. But oleic acid increases while linoleic acid decreases. And the decrease in the linolenic acid seems to contribute to the increase in lipid content. This fact also raises the possibility that genes accountable for specific phenotypes could change the quality of rice if the genes are accumulated. Now, experiments on strains which have large lipid content in EM 40 type 1(ge-1, 3.68 ％), EM type 2(ge-2, 2.91 ％), thick aleurone layer(4.63 ％), and starch layer(3.44 ％) are under way to figure out the effects of gene accumulation. These experiments are likely to present the ways for increasing the lipid content.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1051-1054
• /
• 1993

The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.