• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.104-114
• /
• 2005

This work presents a concept and the related analysis of the traffic performance for a wireless broadband system based on fixed relay stations acting as wireless bridges. The analysis focuses on the important performance indicators end-to-end throughput and delay, taking into account the effects of an automated repeat request protocol. An extension to a MAC frame based access protocol like IEEE 802.11e, 802.15.3, 802.16a, and HIPERLAN2 is outlined and taken as basis for the calculations. The system is intended for both dense populated areas as an overlay to cellular radio systems and to provide wide-area broad-band coverage. The two possible deployment scenarios for both dense urban and wide-area environments are introduced. Analytical and validating simulation results are shown, proving the suitability of the proposed concept for both of the mentioned scenarios. It is established that the fixed relaying concept is well suited to substantially contribute to provide high capacity cellular broad-band radio coverage in next generation (NG) cellular wireless broadband systems.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.466-476
• /
• 2010

This paper proposes a novel simulator which is capable of loading different modules enabling to update the simulator easily when the 4G mobile communication technologies are revised. This simulator is not only designed based on IMT-Advanced channel model but also confirmed its reliability through mutual verification with Matlab based simulator developed by Winner+. The proposed simulator was evaluated on the basis of evaluation requirements on the IMT-Advanced. By comparing with experimental results for IEEE and 3GPP, it was also proved for the simulator to have a better performance.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.63-67
• /
• 2000

본 논문에서는 IEEE 802.11a 무선 LAN에 적합한 16QAM/OFDM 시스템의 성능을 AWGN과 two-ray 다중 경로 페이딩 채널에서 시뮬레이션을 통하여 분석하고 성능 향상을 위한 방법으로 비터비 복호를 하는 길쌈 부호와 단일 탭의 LMS 등화기를 사용한다. 길쌈 부호를 사용하면 AWGN과 다중 경로 페이딩 채널에서 각각 경판정(hard-decision)은 2dB, 6 dB, 연판정(soft-decision)은 4.5 dB, 10 dB의 이득을 얻는다. 또한 다중 경로 페이딩 환경에서 경판정 비터비 복호와 단일 탭의 LMS 등화기를 함께 사용하는 경우에는 경판정 복호만을 사용하는 경우보다 5 dB 향상됨을 알 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.519-528
• /
• 2006

This thesis is regarding of fabricating wibro PAM. First of all, we need to set specification based on link budget for wibro communication circumstance in order to develop PAM, then we decided specification concerning of wibro PAM by considering TTAS_Ko_06_0082R1 which is standarded in Korea, and IEEE Std. 802. 16d/e which is international standard. We selected the Doherty structure to increase efficiency, and pre-distorter structure to increase linearity. The fabricated PAM has not only a result of $26.5dB{\pm}1.0dB$ gain characteristics and maximum of -14 dB return loss characteristics in full frequency bands and full output ranges, but also a result of 37 dBc at 4 tone IMD characteristics which is improved result of 843 and a result of 31 dBc spurious characteristics which is improved result of 5 dB at 4.77 MHz offset point in status of having 27 % efficiency in the 26 dBm high power amplifier output signal. We confirmed the suggested structure is better than others by comparing with normal structure, balanced structure and Doherty structure without predistorter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.39-47
• /
• 2005

The range of hardware implementation increases in communication systems as high-speed processing is required for high data rate. In the broadband wireless access (BWA) system based on IEEE standard 802.16 the functions of higher part in the MAC layer to Provide data needed for generating MAC PDU are implemented in software, and the tasks from formatting MAC PDUs by using those data to transmitting the messages in a modem are implemented in hardware. In this paper, the interface hardware for efficient message exchange between MAC and PHY layers in the BWA system is designed. The hardware performs the following functions including those of the transmission convergence(TC) sublayer; (1) formatting TC PDU(Protocol data unit) from/to MAC PDU, (2) Reed-solomon(RS) encoding/decoding, and (3) resolving DL MAP and UL MAP, so that it controls transmission slot and uplink and downlink traffic according to the modulation scheme of burst profile. Also, it provides various control signal for PHY modem. In addition, the truncated binary exponential backoff (TBEB) algorithm is implemented in a subscriber station to avoid collision on contention-based transmission of messages. The VLSI architecture performing all these functions is implemented and verified in VHDL.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.275-281
• /
• 2006

Simple-relay aided resource allocation (SRARA) schemes are incorporated with throughput guarantee scheduling (TGS) in IEEE 802.16 type time division duplex - orthogonal frequency division multiple access (TDD-OFDMA) downlink in order to enhance service coverage, where the amount of resources for relaying at each relay is limited due to either its available power which is much smaller than base station (BS) power or the overhead required for exchanging feedback information. The performance of SRARA schemes is evaluated with schedulers such as proportional fair (PF) and TGS at 64kbps and 128kbps user throughput requirements when total MS power is set to 500mW or 1 W. For 64kbps throughput requirement level, more improvement comes from relay than scheduler design. For 128kbps case, it comse from scheduler design than relay due to the fact that simple relay can't help using strictly limited amount of resources for relaying function.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.268-277
• /
• 2001

In this paper, the system performance with the convolution code using a Viterbi decoding and the one tap LMS equalizer applied to the OFDM system, which is suitable for IEEE 802.1la wireless LAN in indoor wireless channel, is analyzed through computer simulation. Indoor wireless channel is modeled as Rician fading channel, and QPSK and 16QAM scheme are used for subchannel modulation. In Rician fading channel with the power ratio of the direct path signal to the scattered signals, K=5 dB, BER of $10^{-4}$ is satisfied if the SNRs of the QPSK/OFDM and the 16QAM/OFDM are 8.6 dB and 19.2 dB in hard decision and 5.3 dB and 9.8 dB in soft decision, respectively. Compared with convolution code scheme, it is observed that 16QAM/OFDM system with the one tap LMS equalizer has the performance improvement of 8.6 dB and 2 dB in hard decision and soft decision, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1075-1085
• /
• 2005

The purpose of this paper is to design the architecture for synchronization of MB-OFDM UWB system that is being processed the standardization for Alt-PHY of WPAN(Wireless Personal Area Network) at IEEE802.15.3a and to analyze the implementation loss due to 4 parallel synchronization architecture for design or link margin. First an overview of the MB-OFDM UWB system based on IEEE802.15.3a Alt-PHY standard is described. The effects of non-ideal transmission conditions of the MB-OFDM UWB system including carrier frequency offset and sampling clock offset are analyzed to design a full digital architecture for synchronization. The synchronization architecture using 4-parallel structure is then proposed to consider the VLSI implementation including algorithms for carrier frequency offset and sampling clock offset to minimize the effects of synchronization errors. The overall performance degradation due to the proposed synchronization architecture is simulated to be with maximum 3.08 dB of the ideal receiver in maximum carrier frequency offset and sampling clock offset tolerance fir MB-OFDM UWB system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.160-168
• /
• 2013

In tactical environment, tactical wireless networks are generally comprised of Tactical MANETs(T-MANETs) or Tactical WMNs(T-WMNs). The most important services in tactical network are voice and low rate data such as command control and situation awareness. These data should be forwarded via multi-hop in tactical wireless networks. Urgent and mission-critical data should be protected in this environment, so QoS(Quality of Service) must be guaranteed for specific type of traffic for satisfying the requirement of a user. In IEEE 802.11s, TDMA-based MAC protocol, MCCA(MCF Controlled Channel Access), has a function of resource reservation. But 802.11s protocol can not guarantee the end-to-end QoS, because it only supports reservation with neighbors. In this paper, we propose the routing protocol, R-HWMP(Reservation-based HWMP) which has the resource reservation to support the end-to-end QoS. The proposed protocol can reserve the channel slots and find optimal path in T-WMNs. We analyzed the performance of the proposed protocol and showed that end-to-end QoS is guaranteed using NS-2 simulation.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.56
• /
• pp.48-61
• /
• 2005

과거 밀리미터파는 군사용이나 국간 중계와 같은 제한적인 고정 통신용으로 사용되어 왔다. 이러한 제한적인 활용의 원인은 표준의 부재로 인한 장비 호환성 부족, 전파의 직진성, 고가의 시스템 가격, 새로운 활용 분야 개척 미흡에 있다고 하겠다. 고정 통신 분야에서는 IEEE 802.16에서 표준화가 완료되고, 밀리미터파 차량 충돌 방지 레이다, 밀리미터파 WPAN 등 새로운 활용 분야가 개척됨에 따라 시스템의 가격이 밀리미터파 이용 활성화의 관건이 되고 있으며, 특히 소형화에 의한 개인용 기기에의 응용을 위한 연구가 활발히 진행되고 있다. 본 논문에서는 적층 구조의 유전체 기판을 사용하는 LTCC 기술을 밀리미터파대에 적용하여 밀리미터파 송수신 시스템을 저가격화, 소형화하는 기술의 개발 현황에 대해 기술하였다.