• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.679-686
• /
• 2013

Power efficiency becomes more important in wireless LANs as the mobile stations send more data with limited batteries. It has been known that the IEEE 802.11 PSM is not efficient in high load networks: AP cannot deliver buffered packets to a PS station immediately and it can lead the station to stay in active state quite long and result in energy waste. Moreover, it is inefficient that only one data frame is retrieved by a PS-POLL frame. In this paper, we propose a time slotted scheme to enhance the PSM, in which a mobile station can reserve time slots to receive data frames. Our mechanism can reduce collisions by reservation and decrease the channel occupancy by transmitting multiple data frames via one PS-POLL. The analytic model and simulation results show that proposed scheme reduces power consumption significantly and enhances the performance of PSM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.702-709
• /
• 2008

This paper presents a frequency offset estimation scheme which can be used for packet based OFDM communication systems. The proposed scheme detects the failure of performing coarse frequency offset estimation and compensates the error of estimated coarse frequency offset. The preamble structure considered in this paper is based on the preamble specified in IEEE802.11a and IEEE802.11p standards. We performed simulation to compare the performance according to the different number of reference packets used to detect the failure of performing coarse frequency offset estimation. The simulation results show that the proposed scheme has better performance than the conventional scheme in the low SNR(below 2dB) environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.95-101
• /
• 2014

Scalable video coding (SVC) encodes multimedia data into a base layer and enhancement layers to cope with variable network conditions in an adaptive manner. In SVC, enhancement layers can be decoded only when the base layer is successively received. However, existing works on SVC transmissions in IEEE 802.11 WLANs do not fully investigate this characteristic and thus their performance can be degraded. In this paper, we propose a SVC-aware retransmission (SAR) scheme in IEEE 802.11 WLANs. The SAR scheme applies different retransmission policies for base and enhancement layers by obtaining the optimal number of frames to be retransmitted. As a result, the SAR scheme can reduce unnecessary retransmissions and minimize the transmission latency. Simulation results demonstrate that the SAR scheme can reduce unnecessary data transmission by 12.6% and the transmission latency by 6.6~19.1% compared to conventional retransmission schemes.

• Electronics and Telecommunications Trends
• /
• v.21 no.6 s.102
• /
• pp.202-211
• /
• 2006

본 논문에서는 2.4GHz 마그네트론을 이용하는 RF 전구에 대하여 동 대역을 사용하는IEEE 802.11b 기반의 무선랜과 전파간섭을 분석하였다. RF 전구가 무선랜에 미치는 전파간섭을 분석한 결과, LOS 환경(무선랜 수신전력 -63dBm/MHz)에서는 무선랜 채널 9, 10에 약 1~2Mbps의 전송속도 저하를 유발하였으며, Non-LOS 환경(무선랜 수신전력 -78dBm/MHz)에서는 무선랜 채널 6-11번에 통화절단 현상을 야기하였다. 그러나, RF 전구 수에 따른 간섭전력의 누적효과는 없는 것으로 나타났다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.406-415
• /
• 2005

The standards which use shared medium like IEEE 802.11 wireless LAN have transmission opportunity by contention in contention period. If there are collisions in contention period, medium access control protocol may solve problem by using backoff algorithm. Backoff algorithm is important part in medium access control, but legacy backoff method which is used under IEEE 802.11 standards is not adjusted when load is heavy because of increasing collisions. In this paper, we propose a new load-based dynamic backoff algorithm in contention-based wireless shared medium to improve throughput of medium and to reduce the number of collisions. Proposed backoff algorithm can increase the network utilization about $20\%$ higher than that of binary exponential backoff algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5B
• /
• pp.455-462
• /
• 2009

In this paper, we propose a buffer management scheme for decreasing the packet loss due to buffer overflow and improving the packet fairness between nodes in IEEE 802.11 based multi-hop mesh networks. In the proposed scheme, each mesh router that is an intermediate node receives fairly packet sent from neighboring mesh routers and mobile nodes, and it improves the reception ratio of multi-hop traffic of neighboring mesh routers. Therefore, the proposed scheme can reduce transmission delay and energy consumption. In order to improving the packet loss and the packet fairness, the proposed scheme uses the modified RTS/CTS under the IEEE 802.11 MAC protocol and reduces the packet loss by recognizing the packet size to send to the destination in advance. By using the simulation, we evaluated the proposed scheme in terms of the packet loss ratio and the number of received packet in each mesh router, and compare it to a traditional scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.95-103
• /
• 2009

An efficient symbol time synchronization scheme for IEEE 802.11n MIMO-OFDM based WLAN systems using cyclic shift diversity (CSD) preamble is proposed. CSD is used to prevent unintentional beamforming when the same preamble signal is transmitted through transmit antennas. However, it is difficult to find a proper starting-point of the OFDM symbol with the conventional algorithms because of time offset by multi-peaks which are result from cross-correlation of received CSD preamble with a known short training symbol. In addition, the performance of symbol time sync. is affected by AGC and packet detection position. In this paper, an optimal symbol time synch. algorithm which is composed of the boundary detection scheme between LTS and OFDM symbols, the verification scheme for enhancement of boundary detection accuracy, and the SNR-varying threshold estimation scheme is proposed. Simulation result show that the proposed algorithm has performance gains of 4.3dB in SNR compared to the conventional algorithms at the rate of 1% sync. failure probability for $2{\times}2$ MIMO-OFDM system and 18dB at 0.1% when maximum frequency offset exists. It also can be applied to $4{\times}4$ MIMO-OFDM system without any modification. Hence, it is very suitable for MIMO-OFDM WLAN systems using CSD preamble.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.360-367
• /
• 2006

In this paper, we design the complementary code keying (CCK) modulation/demodulation structure that is proposed in the IEEE 820.11b and IEEE 802.11g. And, this paper proposes the CCK Rake receiver to be fitted for the large delay spread case like the inter-vehicle communications. The channel estimation of each path in the multipath Rayleigh fading channel is done using the packet preamble and, the combining of the multipath signals in the coherent CCK Rake receiver is achieved as the symbol level combining type. In this paper, in order to validate the utilization of CCK modem for the inter-vehicle communications of the telematics communications, we suggest the CCK modem performance that is made for the multipath Rayleigh fading channel with the mobile speed of 300km/h.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.109-116
• /
• 2014

In recent, ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart phone, notebook computer, printer and portable multimedia devices. Accordingly, studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi device using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band causes serious network performance deterioration of wireless sensor networks. This paper examined a method of identifying channel status to avoid interference among wireless communication devices using IEEE 802.11b (Wi-Fi) and other ISM bands during communication among IEEE 802.15.4 based wireless sensor network nodes in ISM band. To identify channels occupied by Wi-Fi traffic, various studies are being conducted that use the RSSI (Received Signal Strength Indicator) value of interference signal obtained through ED (Energy Detection) feature that is one of IEEE 802.15.4 transmitter characteristics. This paper examines an algorithm that identifies the possibility of using more accurate channel by mixing utilization of interference signal and RSSI mean value of interference signal by wireless sensor network nodes. In addition, it verifies such algorithm by using OPNET Network verification simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.578-585
• /
• 2012

Location tracking system through GPS and Wi-Fi is available at no additional cost in an environment of IEEE 802.11-based wireless network. It is useful for many applications in outdoor environment. However, a previous systems used for general device to tag. It is unsuitable for power aware location tracking system because general devices is more expensive and non-optimized for tracking. The hand-off method of IEEE 802.11 standard is not enough considering power consumption. This thesis analyzes the previous location tracking systems and proposes power aware system. First, we designed and implemented tag to optimize location tracking. Next, we propose low-power hand-off method and low-power behavior model in implemented tag. The proposed hand-off method resolve power problem by using the location information and behavior model minimize power consumption of tag through power-saving mode and the concept of duty cycle. To evaluating proposed methods and system performance, we perform simulations and experiments in real environment. And then, we calculate tag's power consumption based on the actual measured current consumption of each operation. In a simulation result, the proposed behavior model and hand-off method reduced about 98%, 59% than the standard's hand-off and default behavior model.