• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.310-317
• /
• 1993

This paper presents a mechanism for improving performance of the IEEE 802.6 MAN(Metropolitan Area Network), a dual-bus structured high-speed communication network, by a more efficient use of bandwidth. The MAN protocol is able to handle various traffic and offers better transmission speed than the conventional LAN, but the unidirectional bus structure and propagation delay of request bits results in unfairness since higher nodes use more bandwidth. As the number of stations and the distances between them are increased, the problem becomes mere serious. As a solution, this paper presents a method that every station enables to identify the used slots, and that a specified class denoted 'erasure station' has with the functions of destination release, slot reuse. As a result, it is export to improve network bandwidth values of each station and the throughput and delay time was analytically analyzed, and it is shown that according to computer simulation results, this mechanism improves the network performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1225-1230
• /
• 2015

MAC protocol for WBAN performs CSMA/CA(:Carrier Sense Multiple Access with Collision Avoidance)algorithm that handles traffic which occurs in emergency with top priority in order to deal with variable data of sensor node for medicine. Emergency message that node sends undergoes collision and delay of transmission by retransmission of emergency message and waste of energy by retransmission. This paper suggests algorithm that minimizes loss of frame caused by collision and applies different backoff parameters by setting order of priority between MAC instruction frame and data frame in CSMA/CA algorithm case which applies order of priority queuing to improve aforementioned problem. According to performance evaluation, it has been found that using suggested MAC protocol showed lower collision probability, higher packet transmission processing ratio and lower packet loss compared with using IEEE 802.15.6.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.334-341
• /
• 2007

A Mobile IP is considered for the efficient mobility function in IEEE 802.16/WiBro environment. However, during the deployment of WiBro, only some of the ACRs(Access Control Router) can support the Mobile IP function. Therefore, a WiBro network can not support the mobility function for the mobile node. In this paper, we implement an overlay-based Mobile IP function and measure the performance through a field trial. Moreover, we evaluate the possibility of commercial deployment and suggest areas that need to be improved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.159-164
• /
• 2016

This paper proposes an improved superframe structure with one : N situation of the network as a target for efficiency battery and communication performance used in the existing standard IEEE 702.15.4 MAC layer. The proposed superframe transforms and adds a two structures. First, we add the proposed scheduling interval after the arrival of the beacon. Second, we change to a structure in which one of the contention access period is divided into two. The contention access period and the contention-free access period of active portion are divided according to the LQI value of the device. Through this system-level simulation written by $c{^+^+}$, as a results show that the battery consumption and transmission performance has been increased.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.203-210
• /
• 2002

In this paper, the BER performance of IEEE 802.11a OFDM WLAN system is obtained by simulation and it is shown that the proposed modified channel estimation algorithm improves the channel estimation performance of the system. The wireless channel used in channel simulation includes AWGN and delay spread channel implemented by TDL model. At first, the performance of OFDM WLAN system according to data rate and coding rate defined in standard is evaluated in AWGN channel. Then, imperfect channel estimation in indoor wireless channel is considered. After the performance of conventional channel estimation scheme using only two long training symbols is evaluated, and that of proposed modified channel estimation scheme using additional 8 short training symbol is compared with it. From the simulation results, it is shown that modified channel estimation scheme provides reduced channel estimation error and improves the channel estimation performance due to noise averaging effect with the same preamble format as defined in specification.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.528-535
• /
• 2009

This paper proposes a mechanism to increase performance using cooperative communications in IEEE 802.11 environment. Existing algorithms use one relay between a source and a destination, which is a 2 hop relay. The proposed algorithm utilizes more than one relay to complement inefficiency of using one relay. In the proposed mechanism, an AP manages network information (rate), which is used to select relays of a source by the AP. The AP notifies the selected relays to the source and neighbor nodes, and the source transmits data to the relays for cooperative communications. Moreover, relays are given to have an opportunity to send its own data right after relaying the source's data. So relays are compensated for the power to send the source's data and overall throughput is improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.33-44
• /
• 2008

Multipath routing protocols with load balance, fault tolerance, aggregated bandwidth in Ad-hoc Networks provide improved throughput and reliable route as compared with singlepath routing protocols. However, multipath routing protocols have not been explored thoroughly in the domain of overhead in Ad-hoc Networks. In this paper, we analyze and compare on-demand singlepath and multipath routing with IEEE 802.11 DCF in terms of Routing overhead and MAC overhead. The results reveals that in comparison with singlepath routing protocol, multipath routing mechanism creates more overheads but provides better performance in congestion and capacity provided that the route length is within a certain upper bound which is derivable. The analytical results are further confirmed by simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.553-558
• /
• 2009

There have been various research efforts to support the fairness between uplink and downlink of TCP streams in IEEE 802.11 networks. Existing methods, which have been effective for the fairness, however could not provide the solution for the unfairness caused by the situation in which a station which is having multiple TCP uplink streams monopolizes the uplink bandwidth. This paper proposes a method that AP allocates token buckets for each uplink TCP station. The proposed method is also able to support the fairness between the uplink and downlink. To remedy the underutilization which may happen under token bucket-based schemes, it allows the movement of redundant tokens among the token buckets. By controlling the token movements, it can balance the fairness and the utilization. Simulation results show that the proposed method is able to support the fairness of the TCP uplink stations, as well as the fairness between the uplink and downlink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.403-410
• /
• 2008

In this paper, we investigate the performance of MMR system in Non-transparent mode. The IEEE 802.16j MMR system has two node of operation, Single-frame (in band) and Multi-frame (out band) mode. In the analysis, we assume that channel interference between MR-BS and RS, or between RSs anywhere in the given area is ignored. The performance is presented in terms of the delay and the frame efficiency by varying number of RS and BS coverage to RS coverage ratio and the maximum coverage area of a BS by varying traffic density. Analytical results show that the Single-frame is more efficient than Multi-frame in frame efficiency and coverage extension.