• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1337-1358
• /
• 2015

In this paper, we present an analytical and simulated study on the performance of adaptive vehicular ad hoc networks (VANET) priority based on Transmission Distance Reliability Range (TDRR) and data type. VANET topology changes rapidly due to its inherent nature of high mobility nodes and unpredictable environments. Therefore, nodes in VANET must be able to adapt to the ever changing environment and optimize parameters to enhance performance. However, there is a lack of adaptability in the current VANET scheme. Existing VANET IEEE802.11p's Enhanced Distributed Channel Access; EDCA assigns priority solely based on data type. In this paper, we propose a new priority scheme which utilizes Markov model to perform TDRR prediction and assign priorities based on the proposed Markov TDRR Prediction with Enhanced Priority VANET Scheme (MarPVS). Subsequently, we performed an analytical study on MarPVS performance modeling. In particular, considering five different priority levels defined in MarPVS, we derived the probability of successful transmission, the number of low priority messages in back off process and concurrent low priority transmission. Finally, the results are used to derive the average transmission delay for data types defined in MarPVS. Numerical results are provided along with simulation results which confirm the accuracy of the proposed analysis. Simulation results demonstrate that the proposed MarPVS results in lower transmission latency and higher packet success rate in comparison with the default IEEE802.11p scheme and greedy scheduler scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.155-162
• /
• 2010

To ensure accurate measurements of wireless network performance, it should be collected real-time data which are transmitted between a large number of nodes in the actual network environment. Therefore, it is necessary to develop simulation tool for finding optimal network system design method such as media access control, routing technique, ad-hoc algorithm of node deployment while overcoming spatial and temporal constraints. Our research attempts to provide an improved architecture and design method of simulation tool for wireless network is an application of multi-threading technique in these issues. We finally show that usability of the proposed simulator by comparing results derived from same test environment in the wireless LAN model of our simulator and widely used network simulation package, NS-2.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.409-414
• /
• 2008

In mobile ad hoc networks, most of on demand routing protocols such as DSR and AODV do not deal with traffic load during the route discovery procedure. To solve the congestion and achieve load balancing, many protocols have been proposed. However, the existing load balancing schemes has only considered avoiding the congested route in the route discovery procedure or finding an alternative route path during a communication session. To mitigate this problem, we have proposed a new scheme which considers the packet bursting mechanism in congested nodes. The proposed packet bursting scheme, which is originally introduced in IEEE 802.11e QoS specification, is to transmit multiple packets right after channel acquisition. Thus, congested nodes can forward buffered packets promptly and minimize bottleneck situation. Each node begins to transmit packets in normal mode whenever its congested status is dissolved. We also propose two threshold values to define exact overloaded status adaptively; one is interface queue length and the other is buffer occupancy time. Through an experimental simulation study, we have compared and contrasted our protocol with normal on demand routing protocols and showed that the proposed scheme is more efficient and effective especially when network traffic is heavily loaded.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.257-260
• /
• 2005

In this paper we design and evaluate Hybrid Wireless Mesh Networks on IEEE 802.11-based network. So we analysis the CWMNs and BWMNs to integrate them. The CWMNs of Ad hoc Mode cannot be directly connected to the BWMNs of Infrastructure Mode because they have different frame types. We propose the new effective HWMNs scheme using DYMO than OLSR protocol for the inter-operability and the mobility

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.220-222
• /
• 2004

이동 애드 혹 망을 구성하는 노드들은 일반적으로 배터리 전력을 사용하기 때문에 이들의 에너지 소모량을 줄이는 연구들이 각 계층에 대해 이루어져 왔다. 몇몇 연구들은 매체 접근 제어 프로토콜로 많이 이용되는 IEEE 802.11 DCF의 전력 소비량을 줄이기 위한 전력 제어 기법을 제시하였다. 기본 전력 제어기법(BASIC Power Control Protocol)은 RTS-CTS와 DATA-ACK 에 대해서 각각 다른 전력을 적용하는 것이다. RTS-CTS는 최대 전력으로 전송되고, DATA-ACK는 불필요한 에너지 낭비를 줄이기 위해 최소한 의 필요한 전력으로 전송하였다. 그러므로 DATA-ACK의 전송범위(transmission range)와 전송파 감지영역(carrier sensing range)은 RTS-CTS의 영역보다 작아진다. 전송파 감지영역에서 RTS-CTS를 감지한 노드들은 신호를 올바로 해석할 수 없으므로 NAV 값을 EIFS로 설정한다. 이 EIFS 구간은 충돌을 막기에는 너무나 짧기 때문에. EIFS 구간이 지난 후에 채널이 비어있는 상태로 간주하고 전송을 시도하게 된다. 이에 따라 DATA-ACK 수신에 있어서 충돌율이 증가하게 되고 네트웍 전체 처리량이 감소하게 된다. 본 논문에서는 기본 전력제어 기법이 가지는 문제점을 해결하고 전체 네트웍 처리량을 향상 시킬수 있는 새로운 전력제어(Power Control) MAC 프로토콜을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.209-211
• /
• 2005

This paper proposes a adaptive medium-access control(MAC) protocol designed for low-power wireless multi-hop sensor networks which is used for connecting physical world and cyber computing space. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining inactive for long time, but becoming suddenly active when specific event is detected. These characteristics of multi-hop sensor networks and applications motivate a MAC that is different from traditional wireless MACs about power conservation scheme, such as IEEE 802.11. Proposed MAC uses a few techniques to reduce energy consumption. Result show that proposed MAC obtains more energy savings.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.279-282
• /
• 2003

This paper proposes a medium-access control(MAC) protocol designed for wireless multi-hop sensor networks which is used for connecting physical world and cyber computing space. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining inactive for long time, but becoming suddenly active when specific event is detected. These characteristics of multi-hop sensor networks and applications motivate a MAC that is different from traditional wireless MACs about power conservation scheme, such as IEEE 802.11. Proposed MAC uses a few techniques to reduce energy consumption. Result show that proposed MAC obtains more energy sayings.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.514-516
• /
• 2004

본 논문에서는 이동 애드혹 망에서 멀티미디어 트래픽 처리를 위해 예약 방식의 매체 접근 제어(MAC) 프로토콜을 설계하고 그 성능을 평가하였다. 예약 방식의 MAC 프로토콜은 두 개의 부분 계층으로 이루어진 계층적 접근법을 기반으로 한다. MAC의 하위 부분 계층은 이동 애드혹 망에서 비동기 데이터 트래픽을 지원하기 위해 CSMA/CA를 사용하는 기본적인 접근 방법을 제공한다. 그 위에 상위 부분 계층은 실제 데이터 전송에 앞서 슬롯(slot) 예약을 수행함으로써 실시간 주기적 트래픽을 지원한다. 제안된 프로토콜은 소프트웨어 시뮬레이터를 사용하여 검증하였다. 시뮬레이션 수행 결과는 예약 방식의 MAC 프로토콜이 IEEE 802.11 표준과 비교하여 실시간 트래픽 전송에 더 적합함을 보여주었다.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.179-190
• /
• 2013

Given the bandwidth assignment for dedicated short range communications for use in vehicular ad-hoc network (VANET) and the expected introduction of equipment in the next few years, we elaborate on how VANET can support infotainment services. We define an architectural model for the integration of VANETs and cellular networks, according to a push mode paradigm where VANETs are used primarily to disseminate service announcements and general interest messages. Cooperation with cellular network is addressed by comparing architecture alternatives. A set of information dissemination protocols for VANETs is compared via simulations on a real urban map. Some results from a lab testbed based on IEEE 802.11p boards are presented along with an application developed for Android operating system to demonstrate the concept of the paper.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.132-141
• /
• 2013

In this paper, we present diversity coded orthogonal frequency division multiplexing (DC-OFDM), an approach to maximize the probability of successful reception and increase the reliability of OFDM-based systems through diversity coding. We focus on the application of DC-OFDM to vehicular networks based on IEEE 802.11p technology and analyze the performance improvement using this new technology. It is shown that DC-OFDM significantly improves the performance of vehicular ad hoc networks in terms of throughput and the expected number of correctly received symbols.