• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.181-185
• /
• 2009

Recently, much attention to a self-organizing mobile ad-hoc network is escalating along with progressive deployment of wireless networks in our everyday life. Being readily deployable, the MANET (mobile ad hoc network) can find its applications to emergency medical service, customized calling service, group-based communications, and military purposes. In this paper we investigate a time slot exchange problem found in the time slot based MAC, that is designed for IEEE 802.11b interfaces composing a MANET. The paper provides a method to maintain the quality of voice call by providing a new time slot when the channel assigned for that time slot gets noisy with interferences induced from other nodes, which belong to the same and/or other subgroups. In order to assess the performance of the proposed algorithm, a set of simulations using the OPNET modeler has been performed assuming that the IEEE 802.11b interfaces are operating under a modified MAC, which is a time slot based reservation MAC implemented in the PCF part of the superframe. In a real-time voice call service over a MANET of a size 500 ${\times}$ 500 meter squares with the number of nodes up to 100, the simulation results are collected and analyzed with respect to the packet loss rate and packet delay. The results show us that the proposed time slot exchange protocol improves the quality of voice call over that of plain DCF.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.33-41
• /
• 2007

The IEEE 802.11 DCF channel access function allows single transmission inside two-hop network in order to avoid collisions and eliminate the hidden and exposed terminal problems. Singular transmission capability causes data frames waiting for the entire roundtrip time in the transmitter neighborhood, and results in increased frame latency and lower network throughput. Real-time and pervasive applications are severely affected for the lower medium utilization; especially with high network traffic. This work proposes a new scheme with the help of Frame Aggregation technique in IEEE802.11n and overcomes the single transmission barrier maintaining the basic DCF functionality. Proposed scheme allows parallel transmissions in non-interfering synchronized slots. Parallel transmissions bypass the conventional physical carrier sense and random Backoff time for several cases and reduce the frame latency and increase the medium utilization and network capacity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.627-635
• /
• 2008

Using directional antenna in wireless network can offer many advantages including significant decrease of interference, increase of spatial reuse and possibility of improving network capacity. However, existing 802.11 MAC is designed for use of omni-directional antenna then those advantages can not be shown in that MAC protocol when it uses directional antenna. In this paper, we present a MAC protocol specifically designed for directional antenna to achieve spatial reuse and improve capacity of MAC protocol. Simulation result shows the advantages of our proposal in comparison with existing MAC in terms of end-to-end delay and network throughput.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.12
• /
• pp.50-59
• /
• 1997

A wireless LAN medical information transmission system is useful for patients who need mobility in a local area environment. This paper proposes a method using WLAN(wireless local area network) and implements a stand-alone system with MAC(meidum access control) layer protocol referenced IEEE 802.11 draft standard. The system consists of a 8bit-microprocessor which handles media access control protocol and a WL100(GEC Plessey) chip which takes care of phsical layer specific routines and uses a RF module DE6003(GEC Plessey). The major features of the implemented system are the CSMA/CA protocol used a consecutive DATA-ACK trasmission method which yields more effective bandwidth allocation for asyncronous traffic transmission and the modified PCF protocol for time-bounded traffic transmission, which operates in ad-hoc network topology apart from IEEE 802.11 draft standard confirm PCF mode operate in infrastruture topology.

• Journal of Computing Science and Engineering
• /
• v.8 no.3
• /
• pp.129-136
• /
• 2014

This paper presents the equivalent circuit modelling and eigenfrequency analysis of a wideband robust capacitive radio frequency (RF) microelectromechanical system (MEMS) switch that was designed using Poly-Si and Au layer membrane for highly reliable switching operation. The circuit characterization includes the extraction of resistance, inductance, on and off state capacitance, and Q-factor. The first six eigenfrequencies are analyzed using a finite element modeler, and the equivalent modes are demonstrated. The switch is optimized for millimeter wave frequencies, which indicate excellent RF performance with isolation of more than 55 dB and a low insertion loss of 0.1 dB in the V-band. The designed switch actuates at 13.2 V. The R, L, C and Q-factor are simulated using Y-matrix data over a frequency sweep of 20-100 GHz. The proposed switch has various applications in satellite communication networks and can also be used for devices that will incorporate the upcoming IEEE Wi-Fi 802.11ad protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1213-1237
• /
• 2019

Vehicular Ad-hoc Network (VANET) facilities envision future Intelligent Transporting Systems (ITSs) by providing inter-vehicle communication for metrics such as road surveillance, traffic information, and road condition. In recent years, vehicle manufacturers, researchers and academicians have devoted significant attention to vehicular communication technology because of its highly dynamic connectivity and self-organized, decentralized networking characteristics. However, due to VANET's high mobility, dynamic network topology and low communication coverage, dissemination of large data packets (e.g. multimedia content) is challenging. Clustering enhances network performance by maintaining communication link stability, sharing network resources and efficiently using bandwidth among nodes. This paper proposes a mobility-based, multi-hop clustering algorithm, (MBCA) for multimedia content broadcasting over an IEEE 802.11p-LTE-enabled hybrid VANET architecture. The OMNeT++ network simulator and a SUMO traffic generator are used to simulate a network scenario. The simulation results indicate that the proposed clustering algorithm over a hybrid VANET architecture improves the overall network stability and performance, resulting in an overall 20% increased cluster head duration, 20% increased cluster member duration, lower cluster overhead, 15% improved data packet delivery ratio and lower network delay from the referenced schemes [46], [47] and [50] during multimedia content dissemination over VANET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1471-1478
• /
• 2011

A typical standard of vehicular ad hoc networks, WAVE which consists of IEEE 1609.x Family standards and IEEE 802.11p standard, includes the multi-channel coordination and channel synchronization function to provide safety services or public services during a car is driven. Generally, the performance of data communication and networking technologies is evaluated by using simulation tools, such as ns-2, OPNET, OPNET++, etc. However, these tools doesn't provide the operations of WAVE protocol. Therefore, in this paper, we implement and verify WAVE simulation program based on ns-2.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.481-485
• /
• 2012

차량 통신 네트워크(VANET, Vehicular Ad Hoc Network)는 운전자 안전 정보 및 ITS(Intelligent Transp ortation System) 서비스를 지원하기 위해 IEEE 1609.4와 IEEE 802.11p를 활용한다. 그러나 차량 노드들의 숫자가 증가할 경우에는 트래픽 경합 문제(Traffic Contention Problem), 숨은 터미널 문제(Hidden Terminal Problem), 전송 지연 문제, 경합으로 인한 패킷 손실 문제, 처리량 감소 문제, MAC의 동적 채널 할당 방법 등 많은 문제점이 발생한다. 따라서 본 논문에서는 IEEE 1609.4와 IEEE 802.11p 기반 차량 통신 네트워크의 특징을 살펴봄으로써 기존 제안되었던 차량 통신 네트워크를 위한 MAC 및 멀티채널 기술의 특징의 장단점을 분석한다. 또한 분석된 문제점을 해결하기 위한 연구 방향을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.187-189
• /
• 2012

The medium access control (MAC) protocol is designed only for single channel in the IEEE 802.11 standard. That means the throughput of the network is limited by the bandwidth of the single channel. The multiple channels can be exploited to get more concurrent transmission. In this paper, we propose a novel Multi-channel MAC that utilizes the channel more efficiently than other Multi-channel MAC protocols.

• Electronics and Telecommunications Trends
• /
• v.31 no.5
• /
• pp.21-30
• /
• 2016

현재 이동/무선통신 환경은 사람과 사람 간의 통신 서비스 형태뿐만 아니라 IoT 통신 서비스로 점차 확대되어가고 있으며, Wi-Fi, Bluetooth 중심의 근거리 무선통신뿐만 아니라 더욱 통신영역이 좁아진 근접통신의 필요성이 대두되고 있다. 이에 따라 근접통신 기술 개발이 지속적으로 이루어지고 있으며, 특히 기기 간의 대용량 데이터 교환이 증가함에 따라 기가급의 속도를 제공하는 초고속 근접통신 기술들이 활발하게 개발되고 있다. IEEE 802에서는 주변 기기들간의 직접(Point-to-Point: P2P) 통신을 지원하는 802.15.3e 초고속 근접통신 기술을 개발하고 있으며, 또한, 802.11ad의 후속 표준으로 개발이 시작된 802.11ay의 Usage Model에도 근접통신이 포함되어 있다. 본고에서는 이러한 초고속 근접통신 기술동향에 대해 기술하고자 한다.