• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.63-67
• /
• 2000

본 논문에서는 IEEE 802.11a 무선 LAN에 적합한 16QAM/OFDM 시스템의 성능을 AWGN과 two-ray 다중 경로 페이딩 채널에서 시뮬레이션을 통하여 분석하고 성능 향상을 위한 방법으로 비터비 복호를 하는 길쌈 부호와 단일 탭의 LMS 등화기를 사용한다. 길쌈 부호를 사용하면 AWGN과 다중 경로 페이딩 채널에서 각각 경판정(hard-decision)은 2dB, 6 dB, 연판정(soft-decision)은 4.5 dB, 10 dB의 이득을 얻는다. 또한 다중 경로 페이딩 환경에서 경판정 비터비 복호와 단일 탭의 LMS 등화기를 함께 사용하는 경우에는 경판정 복호만을 사용하는 경우보다 5 dB 향상됨을 알 수 있다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.77-80
• /
• 2000

본 논문은 IEEE 802.11a에 의해 규정되어진 데이터 율 12Mbps, 부호화 율 1/2, 구속장이 7인 무선LAN용 비터비 디코더를 설계하고 구현한다. 구현에 앞서 각 구속장에 따른 전달함수를 구하여 각 구속장 별 first event 에러 확률과 비트 에러 확률을 구한다. 4bit연성판정을 위해 입력 심볼을 16단계로 양자화 하였으며 역 추적을 위한 방식으로 메모리를 사용하는 대신 새로운 알고리듬을 적용한 레지스터 교환방식을 사용함으로써 majority voting을 가능하도록 하였다 고속의 데이터를 처리하기 위해 병렬구조를 갖는 설계를 FPGA 칩을 사용하여 구현하였고 AWGN 환경 하에서 성능검증을 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.391-398
• /
• 2011

In this paper, we propose a MAC protocol for visible light wireless LAN using LED light. The proposed MAC protocol has a function of automatic direction optimization for LED transceiver. There is periodical time slot for broadcasting and registration in the proposed MAC protocol. We used polling method for data transfer in the protocol since visible light is hard to detect carrier and collision by other mobile stations; thus we cannot use CSMA/CD method in visible light LAN. We also amended the MAC frame of IEEE 802.11 to propose a revised version for visible light wireless LAN using LED light. We investigate the performance of the proposed MAC protocol. When the bit rate of physical layer is 100 Mb/s, the net data throughput using the proposed MAC protocol is estimated to 94.386 Mb/s.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.1-7
• /
• 2008

This paper describes the proposal, design, and implementation of a novel WDMX controller which can provide versatile light effects with the increased capability of the mobility and the number of universes for LED lights. Both the algorithm for DMX protocol and how to implement the frame based on a 8bit micro-controller are explained. The conversion algorithm between the DMX frame and wireless LAN 802. 11b protocol stack is introduced and implemented. In final, some experiments are made to verily the interoperability of the developed WDMX controller with a commercial product of LED lights. 최대 9,999 staves with 30 refresh rate per second may have capability to show various light effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.775-782
• /
• 2016

In this paper, we presented the paper-based reconfigurable frequency selective surface(FSS) for transmitting or blocking the wireless LAN signal in indoor environments. The proposed reconfigurable FSS are designed on coated paper using a printing of conductive ink and conductive adhesive for PIN diode, which provides ON/OFF of the reconfigurable FSS for passing or blocking the 5GHz signal. The reconfigurable FSS attached on the wall can pass or block the incident wireless signal as the received signal strength in indoor. To provide the validity of the proposed FSS, we fabricated the reconfigurable FSS on the paper and confirmed the very similar results between simulations and measurements. From the measured results of the proposed spectrum control system, we know that the proposed reconfigurable FSS can block about 20dB at 5.745GHz~5.805GHz.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.193-197
• /
• 2009

In this paper, the EM wave absorber was designed and fabricated for improvement of Wireless LAN environment at 2.4 GHz. We fabricated several samples in different composition ratios of Sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Sendust and CPE was searched as 80: 20 wt.% by experiments and simulation Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the EM wave absorber was fabricated based on simulated data. Simulated and measured results agreed well. As a result, the developed EM wave absorber with thickness of 3.25 mm has absorption ability of 19 dB at 2.4 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.553-563
• /
• 2013

When the IEEE 802.11 wireless LAN-based broadcasting services, we use broadcast packets to broadcast multimedia contents to a large number of users using limited wireless resources. However, broadcast transmission is difficult to recover the loss packets compared with unicast transmission. Therefore, analysis of packet loss characteristics is required to perform efficient packet recovery. The packet loss in wireless transmissions is often bursty with high loss data rate. Even if loss patterns have the same average packet loss, they are different in the recovery rate of random loss and burst loss depending on the nature. Therefore, the analysis and research of the nature of the loss are needed to recover loss packets considering bursty characteristics. In this paper, we experimented Wi-Fi broadcast transmission according to transmission rate and analyzed bursty characteristics of loss patterns using 4-state markov model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.268-277
• /
• 2001

In this paper, the system performance with the convolution code using a Viterbi decoding and the one tap LMS equalizer applied to the OFDM system, which is suitable for IEEE 802.1la wireless LAN in indoor wireless channel, is analyzed through computer simulation. Indoor wireless channel is modeled as Rician fading channel, and QPSK and 16QAM scheme are used for subchannel modulation. In Rician fading channel with the power ratio of the direct path signal to the scattered signals, K=5 dB, BER of $10^{-4}$ is satisfied if the SNRs of the QPSK/OFDM and the 16QAM/OFDM are 8.6 dB and 19.2 dB in hard decision and 5.3 dB and 9.8 dB in soft decision, respectively. Compared with convolution code scheme, it is observed that 16QAM/OFDM system with the one tap LMS equalizer has the performance improvement of 8.6 dB and 2 dB in hard decision and soft decision, respectively.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.1-12
• /
• 1997

The performance of Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) protocol adopted as a draft standard of IEEE 802.11 wireless LAN, is analyzed by using mathematical method based on renewal theory. We introdude three kinds of CSMA/CA protocols basic, stop-and-wait and 4-Way handshake CSMA/CA with their mathematical analysis. First, a network of finite population is considered and then expand to infinite population. We model the CSMA/CA protocol as a hybrid protocol of 1-persistent CSMA and p-persistent CSMA protocol, and verify analaytical results by computer simulation. We have found that 4-Way Handshake CAMA/CA shows better performance than those of other two types of CSMA/CA in case of high traffic load.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.258-264
• /
• 2004

WLAN technologies enable high-speed data transmission in a small space with relatively low cost and power. There are two main standardizations regarding WLAN; namely, IEEE802.11a and ETSI BRAN. Two standards use a radio frequency of 5 ㎓ band and employs OFDM as a transmission mode. OFDM is known to provide high-frequency efficiency as well as high-speed data transmission. In this paper, We use SPW simulation tool and implement the HIPERLAN/2 system. Based on the HIPERLAN/2 system in the SPW platform, the system performance is analyzed and compared with turbo codes in place of a convolutional coder of the HIPERLAN/2 WLAN system. The simulation results show that the performance with the turbo codes (rate 1/3 and 1/4) at a data rate of 12 Mbps shows 3 ㏈ gain over the system with the convolutional codes. At a data rate of 36 Mbps, the performance with the turbo codes is further improved by approximately 4 ㏈.