• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.239-245
• /
• 2018

So far, various researches have been conducted on evaluation of e-learning software, but subjective evaluation criteria are formed according to the classification presented from the viewpoint of the researcher rather than systematized form according to related standards. In addition, standards for software evaluation are continuously being supplemented for practical use, so it is urgent to establish evaluation bases by establishing evaluation criteria. Therefore, in order to establish the quality evaluation standard of e-learning software, this study analyzes the quality requirements of e-learning software based on the usability system among the quality characteristics of ISO/IEC 25000 series. This evaluation standard is distinguished by the fact that the evaluation standard of e-learning software that reflects the latest trend of related standardization has been established and practical utilization has been improved. It can be used effectively for quality evaluation and certification of e-learning software in the future.

• Journal of Radiation Protection and Research
• /
• v.22 no.2
• /
• pp.85-95
• /
• 1997

TLD and film badges have been traditionally used as formal dosimeters in personal monitoring and are still most widely used. Recently, electronic personal dosimeters based upon Si diode or miniature G-M tube were developed and are getting attractions due to their merits of active nature ; indication of dose rates and the commutative dose, and facilitation of record keeping and radiological control. Response characteristics of the electronic dosimeters including reproducibility, accuracy, linearity, energy and angular dependencies, detection threshold, and response time were examined for three commercial types ; EPD2, STEPHEN6000, and PD-3i. The results were compared with the relevant requirements of IEC standards and Ontario Hydro standards to conclude that their general performances were good. Some specific deficiencies, e.g. incapability of shallow dose measurement of STEPHEN6000, and PD-3i, however, should be corrected to be used as a formal dosimeter.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.435-442
• /
• 2011

Polybrominated diphenyl ethers (PBDEs) are a class of brominated flame retardants (BFRs) which have taken much interest recently due to their potential hazardous effects to human body and ecosystem. Many countries and European community prohibits the usage of certain BFRs in electronics and electronic devices (e.g. RoHS). In this perspectives, Korea Research Institute of Standards and Science (KRISS) has designed and practiced proficiency testing programs based on the ISO/IEC 17043 in order to assist laboratory accreditation activities. The programs for interlaboratory comparisons include congeners of PBDE (PBDE-154, 183, 206, 209) in high impact polystyrene (HIPS). A sample bottle that contains 10 g granular HIPS was distributed to 35 participating laboratories and the test results were calculated by the statistical procedure using z-scores to evaluate performance of each laboratory. The results and the laboratory's performance were discussed.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.64-69
• /
• 2012

The concept of SIL is applied in the most of all standards relating to functional system safety. However there are problems for the people to apply SIL to their plants. as these standards don't include sufficient informations. In this regards, this paper will suggest the direction of SIL application and concept based on IEC 61508 and IEC 61511. A Safety Integrity Level(SIL) is the discrete level(one out of possible fours), corresponding to a range of the probability of an E/E/PE (Electric/Electrical/Programmable Electrical) safety-related system satisfactorily performing the specific safety functions under all the stated conditions within a stated period of time. SIL can be divided into the target SIL(or required SIL) and the result SIL. The target SIL is determined by the risk analysis at the analysis phase of safety lifecycle and the result SIL is calculated during SIL verification at the realization phase of safety lifecycle. The target SIL is determined by the risk analysis like LOPA(Layer Of Protection Analysis), Risk Graph, Risk Matrix and the result SIL is calculated by HFT(Hardware Fault Tolerance), SFF(Safe Failure Fraction) and PFDavg(average Probability of dangerous Failure on Demand). SIL is applied to various areas such as process safety, machinery(road vehicles, railway application, rotating equipment, etc), nuclear sector which functional safety is applied. The functional safety is the part of the overall safety relating to the EUC and the EUC control system that depends on the correct functioning of the E/E/PE safety-related systems and other risk reduction measures. SIL is applied only to the functional safety of SIS(Safety Instrumented System) in safety. EUC is the abbreviation of Equipment Under Control and is the equipment, machinery, apparatus or plant used for manufacturing, process, transportation, medical or other activities.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.194-201
• /
• 2005

Since the necessity for the accurate measurement in the field of acoustics, vibration, and ultrasound was internationally increased, CCAUV (Consultative Committee for Acoustics , Ultrasound and Vibration) was created by the CIPM (International Committee for Weights and Measures) in 1998. One of the first activities of CCAUV is the key comparison on 1' standard microphones. The key comparison was done from April. 1999 to April. 2001 and 12 NMIs(National Metrology Institutes) including KRISS (Korea Research Institute of Standards and Science) were participated. The pilot laboratory was the National Physical Laboratory(NPL). The traveling standards were two LSIP(Laboratory Standard 1' Pressure Type) microphones specified in IEC 61094-1 and the calibration frequency ranges covers from 63Hz to 8kHz. In this paper, the analyzed results in the final report were summarized.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.393-401
• /
• 2017

As the importance of software in various industry areas has been increased, the number of accidents related to software safety are growing up. The key industries such as railroads, aviation and medicine, recommend IEC 61508 and international safety standards for their own to achieve functional safety and reduce the issues caused by that. For equipment of ship navigation, there are not any particular standards or guidance which Korean users can introduce as considering software functional safety. This article defines the procedure and outcomes of the risk analysis in order to secure software functional safety in marine navigational equipment and applies them to an echo sounder as a case study.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.76-83
• /
• 2002

In this paper, we developed the real-time automation program for the immunity test according to the determination of the EUT image, and analyzed the image of standard PC monitor and the monitor image affected by the electromagnetic field. The image change detection algorithm was realized for the real-time determination of the malfunction, and we attempted to obtain the consistent results for the electromagnetic immunity measurement. We showed the possibility to determine the immunity of the PC monitor and other equipment by performing the image change detection of EUT, and the experimental results for the EUT immunity determination of EMS (Electro-Magnetic Susceptibility, IEC 61000-4-3) are also proposed in line with the international standard and domestic trends. 

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.490-500
• /
• 2011

The paradigm that ships are navigated by means of analog navigation devices and caption's experiences is shifted to that ships can be navigated by digital and autonomous navigation systems due to the rapid development of electronics and communication technologies. Hence, all systems deployed in a ship are automated and integrated since corresponding ship systems are not individually operated but integrated and managed under common operating system. In this paper, we overview recent research projects targeted for digitally integrated ships (referred to as digital ships), outline IEC 61162 series, specifying digital interface standards for digital ships, and finally present several issues for further improvement of the IEC 61162 series. In addition, we broadly categorize digital ships into three systems consisting of multiple sub-systems, including a navigation system, a power system, and a automation system in the aspect of operation and function. Corresponding interfacing range and method, as well as interface specification and data types of one system in a digital ship are also described according to sub-systems, respectively.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2019

Today's software systems are becoming larger and more complicated, and the risk of accidents and failures have also grown larger. Software failures and accidents in industrial fields such as automobiles, nuclear power plants, railroad industries, etc. may lead to severe damage of property and human life. The safety-related international standards, such as IEC 61508 have been established and applied to industries for decades. The safety life cycle specified in the standards emphasize the activities to develop safety requirements through hazard and risk analysis in the early stage of software development. In this paper, we propose 'Hazard Analysis Process based on STPA using SysML' in order to ensure the safety of software at the early stage of software development. The proposed hazard analysis can be effectively performed minimizing the loss of hazard by using the BDD and the IBD of SysML to define the control structure of a system. The proposed method also improves the specification of the safety constraints(requirement) by using SD. As a result, it is possible to identify the hazard without missing and identify the hazard scenarios in detail, and safety can be sufficiently ensured in the early stage of software development.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.141-151
• /
• 2022

Wireless earphones are products that are consumed together with smart devices (mobile phones, etc), and there is no twisting and convenience compared to general earphones. However, due to the lack of information on the quality of wireless earphones, consumers tend to purchase products based on brand awareness, and manufacturers deliver information to consumers based on different standards for each product due to the lack of standards for measurement methods for quality evaluation. In particular, the playback time of wireless earphones is a factor that can directly affect consumers' purchases, so it is necessary to prepare a standardized test method to properly measure it. This paper introduces the current status of wireless earphones and related standard trends, and proposes a method for measuring the audio playback time of wireless earphones developed through this. In addition, this measurement method will be proposed as an international standard (IEC) after being established as the national standard, the Korean Industrial Standard (KS).