• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1001-1008
• /
• 2015

This paper introduces the architecture of the power supply in order to achieve the safety integrity target for power supply which is a part of safety related system. The integrity level for safety is set 4 and according to the IEC 62425 which is standard for railway application the architecture design is conducted and process for design is developed. The procedure for design consists with 6 steps. The architecture of power supply that is able to keep the safety integrity against of failure of power supply is derived through the analysis and it is suggested that the power supply adopted the result in this paper is suitable to apply in safety system. Also, the failure frequency that is a quantitative value for the power supply is proposed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1526-1532
• /
• 2014

The Electronic Interlocking unit in railway signalling system is safety-related facilities to determine route and speed for train running. In particular, the SSI(Solid State Interlocking) is Electronic Interlocking unit for high-speed railway, and it performs safety-critical function by MPM(Micro-Processor Module). Meanwhile, MPM is composed of the PES(Programmable Electronic System)-based system, and the PES-based system in railway safety-related facilities should be implemented by complying with the safety requirements defined in IEC 62425 and IEC 61508. In this paper, we performed modeling of failure rate and reliability for MPM implemented by fault tolerance methods and analyzed functional safety for MPM. Moreover, we determined SIL(Safety Integrity Level) for MPM according to the safety requirements defined in IEC 61508 based on an analyzed functional safety.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1079-1086
• /
• 2015

This paper introduces the architecture of OUTPUT module that is suitable using in safety related system having SIL4 and proposes the quantitative target that is required for OUTPUT module. Especially, only output type that is made up Relay output signal and analog signal among various output ways is applied in output module that is a part of safety related system. The FMEA(Failure Modes and Effect Analysis), FTA(Fault Tree Analysis) are used as analysis method. As a result, it proposes to the architecture and failure frequency of the Output module that is used in SIL4 safety related system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

• International Journal of Safety
• /
• v.10 no.2
• /
• pp.27-31
• /
• 2011

As safety-related regulations for signaling systems are standardized to IEC 61508 and 62425, and others at the international level, safety activities and its verification are required. And also there is need to develop technologies for safety improvement to secure safety signaling systems in terms of technologies for safety activities on each life-cycle. In this paper it is reviewed the safety activity processes and technologies each steps of proposed processes respectively for railway signaling systems.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.93-101
• /
• 2010

As safety-related regulations for signaling systems are standardized to IEC 61508/62278/62425, and others at the international level, safety activities and its assessment are required to be performed. And also there is the need to develop technologies for safety improvement to secure safety signaling systems in terms of technologies for safety activities on each life-cycle. In this paper we have developed the safety activity processes and technologies each steps of proposed processes respectively for railway signaling systems. And the proposed process and technologies are applied to the safety activities for mock-up signaling systems.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1016-1022
• /
• 2007

It is demanded to produce the safety evidence documents in other to approval safety characteristic of railway signaling system which stands is included, it is demanding from IEC 62425 standards. Also it is express clearly that safety assessment if signaling system has to be verification of these safety evidence documents. This Safety Case has the results of safety activity through system life-cycle, such as hazard lists, hazard identification and analysis, risk assessment and countermeasure, verification and test results. Consequently, first of all, the analysis and verification of these Safety Case documents has to be accomplished to approval and acceptance of signaling system safety. And also if the safety assessor was want, it is able to be experimental test auditory which is, arbitrary faults injection test, to above described documents verification. In this paper, the contents and architecture of Safety Case are presented as first steps of safety assessment technology establishment for railway signaling system.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.707-710
• /
• 2011

System safety is defined as the state where the hazard risks due to internal system, interface, operation and maintenance are controlled as acceptable levels. It is represented and evaluated either with the risk level of each risk factor with the consideration of operation environments or with Safety Integrity Level (SIL) which is the system functional safety without considering application environments. The assessment results are issued in forms of certificates and they are reused in many cases. However, the conditions and restrictions for different application environments vary in each case, therefore, additional evaluation on the preconditions of assessment in comparison with the actual application environment must be carried out. For the area of train control, TR 50506-1 has been established based on the IEC 62425 (international standard for safety of train control system by RSSB) and EN 50129 (Europe standard) for the further assessment. In this paper, the analysis on TR 5056-1 has been conducted in depth. The purpose of the study is to determine the requirements for inter-acceptability including scope, procedures, principles, examination and suitability. The results can be utilized for the system safety maintenance when new devices or components are introduced in conventional systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.31-45
• /
• 2017

According to the railway accident statistics in recent years, the frequency of accidents has been significantly reduced, due to the advance of related technologies and the establishment of safety information management systems. Nonetheless, accidents due to errors in the operation and maintenance phase and faults in safety design continue to occur. Therefore, to prevent accidents, guidelines for the safety design and manufacture of railway vehicles were established, and a request for the independent safety evaluation of safety designs was made. To respond to this, rail system developers must prepare safety cases as a safety activity product. One of the main items of these safety cases is the safety-related application conditions (SRAC) and, thus, the question of how to develop these SRAC is an important one. The SRAC studies reported so far focused only on the simplicity of the derivation procedure and the specific safety activities in the design phase. This method seems to have the advantage of quickly deriving SRAC items. However, there is a risk that some important safety-related items may be missing. As such, this paper proposes an improved method of developing the SRAC based on the idea of performing both the safety design and safety evaluation activities throughout the whole system lifecycle. In this way, it is possible to develop and manage the SRAC more systematically. Especially, considering the SRAC from the initial stage of the design can allow the safety requirements to be reflected to a greater extent. Also, an application case study on railway signaling systems shows that the method presented herein can prevent the omission of important safety-related items, due to the consideration of the SRAC throughout the system lifecycle.