• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.174-182
• /
• 2020

The permissible limit of ammonia concentration in drinking water recommended by the World Health Organization (WHO) is 1.5 mg/L. However, in the case of groundwater in Kathmandu, Nepal, the concentration of ammonia fluctuates dramatically from 0 to 120 mg/L at different locations and groundwater depths (Chapagain et al., 2010). Such a high concentration of ammonia causes aesthetic problems in drinking water, such as bad taste and odor; hence, prior treatment is required. In Kathmandu, half of the population utilizes groundwater, which is also employed for drinking water, but owing to a lack of knowledge of household water filters, residents of Kathmandu tend to depend greatly on commercially available jar water than on the installation of a proper household filtration method. Thus, in our study, we employed adsorption and reverse osmosis (RO) as two of the most viable decentralized/household treatment options to address the issue of high contamination of ammonia in drinking water. We evaluated their performances from technical and the economic perspectives using synthetically prepared groundwater at varying ammonia concentrations (50 mg/L and 15 mg/L). Consequently, it was found that adsorption via ion exchange (IE) resin was a comparatively better ammonia removal technology than RO, with 100% ammonia removal even after regeneration; the removal by RO was limited to up to 90%. Furthermore, our study suggests that IE is the most suitable ammonia removal technology for places with lower water consumption (< 50 L/day), whereas RO seemed to be a cost-effective technology for places with higher water consumption, where the daily water demand exceeds 50 L/day. Lastly, these assessments suggest that installing a suitable household treatment system would be more efficient and sustainable from both technical and economic points of view than purchasing commercially bottled water.

• Journal of Korean Home Economics Education Association
• /
• v.10 no.2
• /
• pp.13-28
• /
• 1998

The purpose of this study is to compare of learning effects between the inquiry training model and traditional lecture method in the unit of food and nutrition of home economics in the middle school and propose a teaching-learning method of home economics in the middle school.For this study I sampled one hundred students both male and female who were in the first grade students of middle school in Ansan city.The students were divided into two groups each of which was composed of one male class and one female class. One was called the inquiry training model group, which was taught by the inquiry training model, the other the traditional lecture method group, which was taught by traditional lecture method .They learned about food and nutrition unit during the same time. To evaluate the effectiveness of learning, learning achievement degree, instruction interest degree, and the powers of exploration process, a creativity lest by using a Questionnaire was gIven.The resuits of this study are as follows: 1. In the traditional lecture method group between the inquiry training model one, the difference of learning achievement degree was not significant. The score of learning achieve ment degree in the inquiry training group, the female class got higher scores than .the maleone, but the difference was not significant. 2. In the test of instruction interest degree, the traditional lecture method group got higher scores than the inquiry training model one. (p<.001.). In the inquiry training group the male class got higher scores than the f ema Ie one. (p < .001 ) 3. In the test of powers of exploration process, the traditional lecture method group got higher scores than the inquiry training model one.( p< .00 1). In the inquiry training group, the male class got higher scores than the female one, but the difference was not significant. 4. In the test of creativity, the traditional lecture method group got higher scores than the inquiry training one. (p < .00 1). In the inquiry training group, the female class got higher scores than the male one, but the difference was not significant Therefore, the inquiry training model is the more effective instruction model for both male and female students, rather than the traditional lecture method for instruction interest de¬gree, powers of exploration process, creativity and extends instruction interest degree for the male studentsale students.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.99-104
• /
• 2006

The Langmuir-Blodgett(LB) technique has attracted considerable interest in the fabrication of electrical and electronic devices. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. A linear relationship between the monolayer compression speed u and the molecular area Am. Compression speed a was about 30, 40, 50mm/min. Langmuir-Blodgett(LB)layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9$\sim$21. Also, we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V. The I-V characteristics of the device are measured from -3 to +3[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.122-127
• /
• 2006

A series of conductive filler were prepared with electroless plating method. Base conductive materials of the filler were nickel and copper. The cores were prepared with Nylon 6 and rayon in different aspect ratio. Also, various complexes were made with ABS resin and conductive filler with different filler feed ratio. The conductivity of the filler was measured with conductivity analyzer and the size distributions of fillers was measured with laser particle size analyzer. Electromagnetic wave shielding efficiency of each complex film was measured with flange circular coaxial transmission line sample holder within the 1MHz$\sim$1GHz bandwidth range. From this study, the conductivity of filers surpass that of other carbon films. It is available that the filler made of fibrous materials can be applied in plastic molding industry of electric appliances as a EMI filler.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.26-38
• /
• 1991

The fundamental conditions for growing $r-6Bi_2O_3{\cdot}SiO_2$(BSO) single crystal plates by EFG(Edge-defined Film-fed Growth) method, were investigated and characterization, quality test, property measurement were performed for obtained BSO single crystal plates. The opti$\mu$ growing conditions determined in this study were as follows: ${\cdot}$temperature gradient;$24^{\circ}C/cm$ ${\cdot}$pulling rate;2.0mm/h. BSO Single crystal plates grown at the above optimum conditions did not include secondary phase or grain boundary and were confirmed as single crystals by X-ray analysis. IT was found that the single crystal plates had <100> growth direction. G defects, ie pore, void inclusion, striation, were not detected in the single crystal plate under polarizing microscope but dislocations(microscopic defect) were found and dislocation density was $5.1\times10^5/cm^2$.

• 전자공학회논문지 IE
• /
• v.43 no.1
• /
• pp.46-51
• /
• 2006

Recently, smart card system which is known as easy to portable and also safe from physical, electrical, and software attack is observed to manage information that becomes the target of security in safety. And java card graft upon java technology to smart card platform is having very good advantage with object-oriented techniques and also, java card have the open type OS that can show the same action in different hardware characteristic which allows various application programs. In this paper, we introduced independent execution characteristic of java platform because being set to each smart card was uncomfortable till now and we designed access control member card that allows several administrators in different access privilege by single card using java card. Several administrators can approach to various information of file type that is included on issued card to user by using different PIN. In the proposed method, confirmation of personal information, administration contents update, demand by contents, is possible by single card. At this moment, wish to do safer user certification that improve security limitation which is from PIN, used for user certification, and signature data. In the proposed method, as design and implementation of utilization technology of java card, biometrics, user certification which uses multi PIN, provide that more safety and conveniently.

• 전자공학회논문지 IE
• /
• v.44 no.4
• /
• pp.48-54
• /
• 2007

Due to the diverse utilization of multimedia, interests are increasing towards processing (saving, editing, searching, etc) three dimensional object data. This paper proposes and realizes a retrieval system for three dimensional objects using reflective symmetry. For the retrieval method, a reflective symmetric axis with a projector is used. The symmetric plane is calculated by the reflection symmetry, and the depth buffer is calculated for the symmetric plane. Then, by applying the Fourier Transform to the depth buffer, the feature vector for the object is generated and retrieved. For the sample of inquiry, the model of similar symmetry was extracted using the benchmark data from Konstantz University. Considering that most of the objects have symmetrical characteristics, the proposed method of retrieving three dimensional objects using a reflective symmetric surface is an outstanding retrieval system.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.87-92
• /
• 2006

Many watermarking methods for protecting the intellectual property right and authentication multimedia data have been proposed in recent years. In image authentication watermarking, watermark is inserted into an image to detect any malicious alteration. So, watermark for authentication and integrity should be erased easily when the image is changed by scaling or cropping etc. We propose in this paper a fragile watermarking algorithm for image integrity verification and tamper localization proofing using special hierarchical structure. In the proposed method, the image to be watermarked is divided into blocks in a multi-level hierarchy and calculating block digital signatures in thus hierarchy. At each level of the hierarchy, a digital signature for each block is calculated using the seven most significant bit(MSBs)-plane values of all pixels within the block. And the resulting signature is incorporated into the LSBs of selected pixels within the block. We provide experimental results to demonstrate the effectiveness of the proposed method.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.105-113
• /
• 1968

The following experiments were carried out at rock method oyster field at Uduri, Dolsan-myon, Yeocheon-gun, Jeon-nam, Korea, in 1966. In this experiment, the settling rate of oyster at each exposure level and their growth rate were checked. 1. The settling rate of oyster spats was highest at 4 hour exposure level in the day-time during spring tide, and the growth rate became greater the lower stratum until 3 hours and 30 minutes exposure level. 2. Rocks applied at the place higher than 5 to 6 hour exposure level which amount 26 percents of applied rocks, were not utilized properly because the settling rate of spats and their growth rate were very bad. 3. For the future application of rocks for oyster culture, effort should be paid to instruct the oyster farmers to apply all rocks at proper exposure Ie el with bottom leveling and the rocks should be spaced properly for better barvest.

• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.22-27
• /
• 2006

This paper presents the control system of high-efficiency automotive 35W metal-halide lamp ballast using the new control method and planar transformer. In this paper, the electronic ballast is designed so that digital control method by microcontroller can be applied to the electronic ballast for the lamp requirement and peripheral environment in order that metal-halide lamp, which has the complicated transient features, is to be applied to the automobile even if it has superior features in brightness, color rendering, light efficiency, and lifespan compared to the conventional halogen lamp. Also, the efficiency increase of the ballast is devised by being varied the switching frequency of Flyback Converter following the battery input voltage of the automobile. Being designed for high-frequency switching transformer of converter in planar form, reduction of loss, weight, overall size are realized and efficient power control in the automobile that had the limited energy and the limited space of battery is devised. The results of the proposed system is verified through various experiment results.