• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.79-86
• /
• 2016

Physical layer security is cryptography technique to protect information by using physical nature of signals. Currently, many works on physical layer security have been actively researching while those researching models still have some problems to be solved. Eavesdropper does not share its channel state information with legitimate users to hide its presence. And when node transmits signal, hardware impairments are occurred, whereas many current researches assume that node model is ideal node and does not consider hardware impairments. The main features and contributions of this paper to solve these problems are as follows. First, our proposed system model deploys torch node around legitimate user to obtain channel state information of eavesdropper and considers hardware impairments by using channel state information of torch node. Second, we derive closed-form expression of intercept probability for the proposed system model. The results of the performance evaluation through various simulations to find out the effects on proposed system model in physical layer security show that imperfect channel state information does not effect on intercept probability while imperfect node model effects on intercept probability, Ergodic secrecy capacity and secrecy capacity.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.176-182
• /
• 2003

Purpose : The purpose of this study is to describe the surgical technique of ACL reconstruction with the flexible reamer and evaluate the clinical results of this method. Materials and Methods : Twenty four patients who followed for 12 months were included. The results were evaluated by Lachman test, KT-2000 arthrometer, Lysholm score, and postoperative roentgenogram of the knee. Results : The range of motion of the affected knee was acceptable except one case(10 to 90 degree) and at the last follow up, two cases were positive in Lachman test. Mean Lysholm knee scoring scale was 63.7 point preoperatively and 91.4 point at the last follow up. The results of KT-2000 arthrometer was 6.6mm preoperatively and 1.5mm at the last follow up. In operative time, there were decrease of mean 13.5 minute than ACL reconstruction without the flexible reamer, Conclusion : ACL reconstruction with the flexible reamer achieves the ideal isometric point of tibia and femur with no difficulty, proper notchplasty preventing from the impingement, and lessens the operative time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.409-409
• /
• 2014

Recently hexagonal boron nitride (h-BN), III-V compound of boron and nitrogen with strong covalent $sp^2$ bond, is a 2 dimensional insulating material with a large direct band gap up to 6 eV. Its outstanding properties such as strong mechanical strength, high thermal conductivity, and chemical stability have been reported to be similar or superior to graphene. Because of these excellent properties, h-BN can potentially be used for variety of applications such as dielectric layer, deep UV optoelectronic device, and protective transparent substrate. Ultra flat and charge impurity-free surface of h-BN is also an ideal substrate to maintain electrical properties of 2 dimensional materials such as graphene. To synthesize a single or a few layered h-BN, chemical vapor deposition method (CVD) has been widely used by using an ammonia borane as a precursor. Ammonia borane decomposes into hydrogen (gas), monomeric aminoborane (solid), and borazine (gas) that is used for growing h-BN layer. However, very active monomeric aminoborane forms polymeric aminoborane nanoparticles that are white non-crystalline BN nanoparticles of 50~100 nm in diameter. The presence of these BN nanoparticles following the synthesis has been hampering the implementation of h-BN to various applications. Therefore, it is quite important to grow a clean and high quality h-BN layer free of BN particles without having to introduce complicated process steps. We have demonstrated a synthesis of a high quality h-BN monolayer free of BN nanoparticles in wafer-scale size of $7{\times}7cm^2$ by using CVD method incorporating a simple filter system. The measured results have shown that the filter can effectively remove BN nanoparticles by restricting them from reaching to Cu substrate. Layer thickness of about 0.48 nm measured by AFM, a Raman shift of $1,371{\sim}1,372cm^{-1}$ measured by micro Raman spectroscopy along with optical band gap of 6.06 eV estimated from UV-Vis Spectrophotometer confirm the formation of monolayer h-BN. Quantitative XPS analysis for the ratio of boron and nitrogen and CS-corrected HRTEM image of atomic resolution hexagonal lattices indicate a high quality stoichiometric h-BN. The method presented here provides a promising technique for the synthesis of high quality monolayer h-BN free of BN nanoparticles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.267-297
• /
• 2017

This paper attempts a close-reading of Michel Ocelot's short animation film, (1979), and proposes it as an available text in art appreciation class for young students. stimulates the students' attention and intellectual curiosity thanks to the exotic and fantastic atmosphere, beautiful mise en scene, and intriguing plot. Ocelot's technique of decoupage used in this film rejuvenates both the traditional folk art and Lotte Reiniger's early experiments in the history of animation film. Ocelot subverts the ideal of modern male adult subject as unique possessor of scientific knowledge and technology, by adopting a female figure and a young child, who is also female, as main characters. The imaginative and subversive power of animation contributes to creating posthuman beings beyond the homocentric figure of Vitruvian Man. The posthuman condition supposes that human beings have the equal relationship of continuum with not only other humans but also non-human beings like all living things and inanimate matters. In order to teach and learn the posthuman condition, it is necessary to conceive an interdisciplinary and integrated curriculum including art, science, philosophy, history, and social sciences. Animation film serves excellently as educational text for the integrated curriculum of the posthuman.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.174-182
• /
• 2009

Purpose: The Mulliken's method is a one of the very excellent technique to correction of the unilateral cleft lip. It could decrease the need of additional operation and second operation by the early simultaneous correction of unilateral cleft lip and nasal deformity, at a time. Numerous procedures were advocated for the correction of nasal deformity, but with general dissatisfaction of the results, it became obvious that no one procedure is the ideal one. The authors have been operating on unilateral cleft lip by Mulliken's method and long term follow - up of postoperative result was evaluated. Methods: The authors have done long term follow - up of result in the 75 cases unilateral cleft lip patient, during 1 ~ 7 years. That was repaired by simultaneous correction of cleft lip and nasal deformity by Mulliken's method at the period from June, 1997 to December, 2007. The patients were unilateral complete cleft lip 39 cases, unilateral incomplete cleft lip 36 cases. In the severe complete cleft lip cases, lip adhesion operation was done before definite operation. The mean age of unilateral cleft lip operation was 3.2 months. Five anthropometric parameters, which were upper lip, cutaneous lip and vermilion mucosa height, nasal tip protrusion, columella length were measured by Sliding Vernier Caliper. The anthropometric analysis was performed preoperative and postoperative at 6 months, 3, 5 and 7 years and the results were com pared with those of age - matched, normal children. T - tests were used to analyze the differences between the measurements. Results: Long - term postoperative results were evaluated by anthropometrically. Most patients showed adequate growth of upper lip height, vermilion mucosa height and columella length. But nasal tip protrusion was relatively short compare with normal value. Incomplete cleft lip group was nearly normal growth results than complete cleft lip group. Conclusion: In conclusion, we could make harmonious Cupid's bow, natural philtrum and lip, appropriate nasal shape by Mulliken's method. But nasal tip protrusion was under the normal values on complete and incomplete group. And incomplete group was more good results than complete group. We have experienced repair of cleft lip by Mulliken's method with 75 cases of unilateral cleft lip patients and conclude that it was very useful and good method.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.2
• /
• pp.154-162
• /
• 1999

The laryngopharyngectomy for tumor ablation is the most common indication for pharyngoesophageal reconstruction in our country. Most of these cases are advanced laryngeal cancer that has spread beyond the larynx, pharynx and cervical esophagus. Such patients are obviously unable to breathe, swallow, or speak in the normal manner. The ideal reconstruction would restore normal anatomy, permitting patients to breathe and swallow without aspiration, and would not require a permanent tracheostomy. Reconstruction of the pharyngoesophageal defect traditionally been carried out with tubed local random flap, deltopectoral or musculocutaneous flap. Another approach is the pedicled enteric flap. But microsurgical reconstruction of the pharyngoesophagus, using either the free jejunal or the tubed radial forearm flap, have now become the preferred technique. Among them, we used jejunal free flap in 39 cases, tubed radial forearm free flap in 5 cases, patched radial forearm free flap in 2 cases and pectoralis major myocutaneous island flap in 2 cases from December 1990 to Febrary 1999. In this paper we illustrated that both forearm and jejunal free flap is a usful alternative in reconstruction of hypopharynx and cervical esophagus.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.539-544
• /
• 2020

A three-dimensional (3D) porous polyaniline (PANI) film was fabricated by a combined photo-and soft-lithography technique based on a large-area nanopillar array, followed by a controlled chemical dilute polymerization. The as-obtained 3D PANI film consisted of hierarchically interconnected PANI nanofibers, resulting in a 3D hierarchical nanoweb film with a large surface and open porous structure. Using electrochemical measurements, the resulting 3D PANI film was demonstrated as a flexible pH sensor electrode, exhibiting a high sensitivity of 60.3 mV/pH, which is close to the ideal Nernstian behavior. In addition, the 3D PANI electrode showed a fast response time of 10 s, good repeatability, and good selectivity. When the 3D PANI electrode was measured under a mechanically bent state, the electrode exhibited a high sensitivity of 60.4 mV/pH, demonstrating flexible pH sensor performance.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.459-467
• /
• 1998

The existing methods to analyze the heterogeneous porous media based on the similar media concept are the microscopic Miller similitude(MiS), the macroscopic Miller similitude(MaS) and the Warrick similitude(WS). The inter-relationship is found such that MiS ⊂ MaS ⊂ (⊂:subset). The proposed method is based ont eh assumption that the scale variables $\alpha$=w and the moisture content is dimensionless by introducing the effective degree of saturation instead of the degree of saturation into WS. The method, without the loss of generality in view of the inspectional analysis, can explain the heterogeneity of the media by using the scale variable $\alpha$ only. The media of $\alpha$=1 (average of $\alpha$) means the equivalent media corresponding to the heterogeneous media, while the standard deviation of $\alpha$ may explain the degree of the heterogeneity of the media under consideration. The hydraulic conductivity of the media with $\alpha$>1 is greater than that of the equivalent media, and the effective moisture content of the media with $\alpha$>1 is also greater. Based on these properties of the scale variable $\alpha$, the ideal vertical one-dimensional heterogeneous porous media is generated by using the technique of random number generation.