• 대한치과교정학회지
• /
• 제26권6호
• /
• pp.705-715
• /
• 1996

The lingual multibracket appliance was developed to overcome the unesthetic nature of traditional fixed orthodontic labial appliances; however, treatment with this appliance was regarded as very difficult as well as a time-consuming. Recently, these problems have been reduced because of advances in lingual bracket systems, improved indirect bonding technique and the development of more flexible wires. There has been a marked increase in the number of adults desiring orthodontic treatment over recent years and many of these patients tend to seek invisible orthodontic appliances due to esthetic reasons. Although the lingual multibracket treatment is not ideal, this form of treatment is currently the best option for the patients with esthetic concerns. Here, I would like to present a case treated successfully with lingual multibracket appliance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.644-647
• /
• 1997

Asymmetric cylinders are usually used as an actuator of active suspensions. The conventional optimal controller design does not include actuator dynamics as a state and force controller is needed to track the desired force. But the actuator is not ideal, so performance of an active suspension system is degraded. In this paper, we take account nonlinear actuator dynamics and obtain a linear model using a feedback linearization technique then apply optimal control method. Effectiveness of proposed method is demonstrated by numerical simulation of 1/4 car model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1617-1620
• /
• 1997

This paper describes the camera caliberation based-neural network with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distoriton causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing. The performance of proposed camera aclibration is illustrated by simulation and experiment.

• 한국가시화정보학회지
• /
• 제15권3호
• /
• pp.47-51
• /
• 2017

In this study, we investigate the wake characteristics in laminar inflow and two different turbulent inflow cases. To solve the flow with wind turbines and its wake, we use large eddy simulation (LES) technique with actuator line method (ALM) and turbulent inflow of Turbsim. We perform the quantitative analysis of velocity deficit and turbulent intensity in laminar inflow case and turbulent inflow case with different turbulent intensity. In turbulent inflow, unsteady strong wake recovery which is highly fluctuated in time. Normalized power in turbulent inflow case is also highly fluctuated with unsteady wake recovery, while that in laminar inflow has quasi steady characteristic in power generation.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.68-77
• /
• 2006

Nowadays, the increasing global competition forces automobile manufacturer to increase quality and to reduce the cost and time for manufacturing planning. To solve these problems, automobile manufacturers try to apply digital manufacturing technologies. In this paper, a concept of method for planning the digital assembly system is proposed. Based on the requirements of assembly tasks obtained through product analysis, the function and sequence modeling for assembly process is executed using the IDEF0 and UML model. For implementation of digital assembly system, the selected components are modeled by using 3D CAD tools. According to the system configuration strategy, lots of the alternative solutions for the assembly system are generated. Finally, the optimal assembly system is chosen by the evaluation of the alternative solutions with TOPSIS(Technique for Order Preference by Similarity to Ideal Solution) method. According to proposed procedure, digital laser welding system is implemented in DELMIA.

• 대한치과의사협회지
• /
• 제10권12호
• /
• pp.809-812
• /
• 1972

This present paper is concerned with four unit fixed bridge construction by one piece casting technique in the case of missing of upper left second premolar and first molar. The authors had good clinical results with following advantages. 1. The complete bridge can be delivered to the patient for two appointments. 2. The laboratory procedures for solder joint are not necessary. 3. A one piece casting can be properly shaped without weak joints. 4. The casting can be heat-treated to insure an ideal molecular structure. 5. Porcelain veneers can be applied without weakening or melting solder joints.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.225-229
• /
• 1997

This paper describes the camera calibration based-neural network with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes and inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is, the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing. The performance of proposed camera calibration is illustrated by simulation and experiment.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.506-513
• /
• 2007

This paper proposes a rotary magnetic position sensor which has a sinusoidally magnetized permanent magnet with a small number of poles. To make the sinusoidal magnetic flux density distribution from the permanent magnet, a magnetizing future is optimized by the DOE(Design of Experiments) method. The magnetization process is analyzed using the Preisach model and 2 dimensional finite element method. The magnetic flux density distribution from the magnetized permanent magnet is very similar to ideal sine wave. The simulation result of the magnetic flux density distribution is compared with the experimental one. Also the availability of the proposed rotary type magnetic position sensor is confirmed by position calculation technique.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2006년도 하계학술대회
• /
• pp.219-222
• /
• 2006

In this paper an intrusion detection system technique of wireless Ad Hoc network is explained and the advantage of making them work in IEEE 802.15.4/ZigBee wireless standard is also discussed. The methodology that is mentioned here is intrusion detection architecture based on a local intrusion database [1]. An ad hoc network is a collection of nodes that is connected through a wireless medium forming rapidly changing topologies. Due to increased connectivity (especially on the Internet), and the vast spectrum of financial possibilities that are opening up, more and more systems are subject to attack by intruders. An ideal IDS should able to detect an anomaly caused by the intruders quickly so that the misbehaving node/nodes can be identified and appropriate actions (e.g. punish or avoid misbehaving nodes) can be taken so that further damage to the network is minimized

• 한국실내디자인학회논문집
• /
• 제2호
• /
• pp.46-53
• /
• 1994

The Soubise Mansin which construction ended in the latter half of 1730s has several rooms which symbolize Rococo which appeared in the 18 century. The work of the Soubis Mansion done by an architect, Boffrand , is a significant work in which he had introduced a new style of building , Rococo, based on a style of Regency, thereby showing a big leaf in that kind of art. In other words, with the elements already established in the days of Regency-white wood panel, gold molding, mirror technique, etc. -and the characteristics of unprecedent, outstanding spatial forms and Rococo decoration introduced. Rococo had enjoyed its peak of full flourish within the moderation of being never excessively magnificent, beautiful, and dignified. It is a remarkable thing that a model of such perfect ideal beauty was suggested even in the begining state of Rococo and it is deemed that such a point resulted in such influence on other places like the Versalilles Palace, etc.