• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.111-116
• /
• 2006

In this paper, the image sensor using the a-Si:H TFT is proposed. The optimum amorphous silicon thin film is deposited using plasma enhanced chemical vapor deposition (PECVD). TFT and photodiode both with the thin film are fabricated and form image sensor. The photodiode shows that Idark is $10^{-12}A$, Iphoto is $10^{-9}A$ and Iphoto/Idark is $10^3$, respectively. In the case of a-Si:H TFT, it indicates that Ion/Ioff is $10^6$, the drain current is a few ${\mu}A$ and Vth is $2\~4$ volts. For the analysis on the fabricated image sensor, the reverse bias of -5 voltage in ITO of photodiode and $70{\mu}sec$ pulse in the gate of TFT are applied. The image sensor with good property was conformed through the measured photo/dark current.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.153-160
• /
• 2013

Online game provides a kind of cyber money aden and game instruments, items in order to attract game users. Game users want stronger, better and higher-leveled items with competition. Demands and supplies on items are formed and the transactions are made. The problem is there happen frequently illegal behaviors in the process of transactions. Among these illegal behaviors, for using other's id and password without authorization and stealing items, rejecting to return assigned items, providing stolen item to other who knows the fact or destroying others' items, it is difficult to apply provisions on properties in the criminal code on them. Because the criminal code has a duty to prevent separation between substantial criminal behavior and regulations, it should reflect substantial cultures and values of the times. Therefore, property like items in cyber space can be considered as new property to need to be protect under the criminal code and it may be not an interpretation of expansion. The reason is it is practical and reasonable to judge whether propertiness can be established considering cyber space's unique characteristics. It is time to review propertiness of Article No. 346 according to the request of times of the digital age.

• Korean Journal of Agricultural Science
• /
• v.43 no.1
• /
• pp.33-39
• /
• 2016

Brassicaceae consists of important species that have significant amounts of metabolites, and many studies have been carried out in order to understand the mechanism that improves the content of these metabolites. In Brassicacea, Cardamine manshurica Nakai is one of the important edible plants and is rich in oil, fiber, and various nutrients. In this study, we constructed cDNA library using leaves from 4 week-old plants and analyzed the ESTs of C. manshurica Nakai. One thousand thirty-nine ESTs were discovered which assembled to form 468 unigenes. The latter contained 116 contigs and 352 singletons. Similarity search of these ESTs with BLASTX revealed similarities with Arabidopsis thaliana 285 (31.9%), Arabidopsis lyrata 172 (19.3%), Capsella rubella 162 (18.1%), and Eutrema salsugineum 137 (15.3%). ESTs were functionally categorized into molecular function, biological process, and cellular component, and each category took 10.6%, 58.5%, and 30.9%, respectively. The functional analysis also found that 94.9% of ESTs showed at least one GO ID. Microsatellite analysis of 468 unigene sequences revealed 225 structures of which Di-, Tri-, Tetra-, Penta-repeats were 35.6% (80/225), 63.1% (142/225), 0.9% (2/225), and 0.4% (1/225), respectively. The results from our study can be a valuable resource for Cardamine research.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.109-118
• /
• 2013

This paper adopts the system configuration to assess the reliability instead of making a fault tree (FT), which is a traditional method to analyze reliability of a certain system; this is the reliability block diagram (RBD) method. The RBD method is a graphical presentation of a system diagram connecting the subsystems of components according to their functions or reliability relationships. The equipment model for the reliability simulation is modeled based on the discrete event system specification (DEVS) formalism. In order to make various alternatives of target system, this paper also adopts the system entity structure (SES), an ontological framework that hierarchically represents the elements of a system and their relationships. To enhance the calculation time of reliability analysis, GPU-based accelerations are adopted to the reliability simulation.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.140-146
• /
• 2014

An internal standard was used in PCID (post column isotope dilution) to improve the accuracy and precision in quantification of various chemical species. The error occurring in the column was the largest in HPLC-ICP/MS (high performance liquid chromatography-inductively coupled plasma/mass spectrometry) when PCID and other traditional quantification methods were compared with each other. Internal standard was effective in correcting the loss of sample in the column to improve accuracy and precision. When applied to SeMet, using MeSecys or $Se^{4+}$ as an internal standard, relative errors were reduced from 31% and 13% to less than 1%, while standard deviations were reduced from 5.1% and 6.9% to 1.5% and 0.2%, respectively. Positive aspects of using an internal standard in PCID were compared with other quantitative techniques and discussed in detail.

• Mass Spectrometry Letters
• /
• v.3 no.2
• /
• pp.58-61
• /
• 2012

A method based on flow injection-isotope dilution-cold vapor-inductively coupled plasma mass spectrometry (FI-IDCV-ICP/MS) has been applied to determine trace level of mercury in fly ash. $^{200}Hg$ isotopic spike was added to 0.25 g of BCR176R fly ash and then decomposed by microwave digestion procedure with acid mixture A (8 mL $HNO_3$ + 2 mL HCl + 2 mL HF) and acid mixture B (8 mL $HNO_3$ + 2 mL $HClO_4$ + 2 mL HF) for applying IDMS. Mercury cold vapor was generated by using reductant solution of 0.2% (w/w) $NaBH_4$ and 0.05% (w/w) NaOH. The measurements of n($^{200}Hg$)/n($^{202}Hg$) isotope ratio was made using a quadrupole ICP/MS system. The accuracy in this method was verified by the analysis of certified reference material (CRM) of fly ash (BCR 176R). The indicative value of Hg in BCR 176R fly ash was $1.60{\pm}0.23$ mg/kg (k = 2). The determined values of Hg in BCR 176R fly ash by the method of FI-CV-ID-ICP/MS described in this paper were $1.60{\pm}0.24$ mg/kg (k = 3.18) and the analysis results were in well agreement with the indicative value within the range of uncertainty.

• Journal of Chest Surgery
• /
• v.10 no.2
• /
• pp.195-204
• /
• 1977

Dynamic lung compliance was measured in healthy ten young[mean age, 26 years] male and five young[mean age, 25 years] female. Lung volume was integrated of the rate of flow signal which was obtained by using pneumotachograph and differential pressure transducer[PM 5, Statham]. Intrapleural pressure was measured as that of intraesophagel pressure. Esophageal ballon, 15. 5cm in length, 4ml of luminal capacity and made of thin latex, was connected to the polyethylene tube that had 12-14 side holes and was of 1.5mm of ID. Transpulmonary pressure was traced by means of differential pressure transducer[PM 131, Statham] to which connected the esophageal balloon catheter and connection tube from mouth piece. Lung volume and transpulmonary pressure were photographed by cathode ray oscilloscope camera while the subjects were breathing spontaneously. Dynamic lung compliance loop was displayed on single trace monitor and subtraction was performed for the quasi-static hysteresis. Dynamic lung compliance was measured, 1. by plotting the pressure-volume relationship 2. from the subtracted pressure-volume loop. Results were as follows. 1. Dynamic lung compliances measured by plotting of healthy young male and female were $0.202{\pm}0.06$ and $0.190{\pm}0.023L/cm$ $H_2O$ respectively. 2. When measured from subtraction loop, dynamic lung compliance for male and female were $0.327{\pm}0.107$, and $0.27{\pm}0.06L/cm$ $H_2O$ respectively. 3. Dynamic chest wall and total respiratory system compliance were also measured. 4. Dynamic lung compliance by plotting appeared to be essentially same when compared to that of static compliance reported previously from our laboratory, however, that obtained from subtraction loop revealed higher values than the compliances obtained by plotting and that of static compliance.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.1
• /
• pp.39-49
• /
• 2002

In this study, limits of detection (LOD), accuracy and precision of four sampling/ analytical methods were evaluated and compared for the determination of airborne hexavalent chromium, Cr (VI). The methods include : (1) a combination of the National Institute for Occupational Safety and Health (NIOSH) Method 7600/U. S. Environmental Protection Agency (EPA) Method 218.6 (NIOSH/EPA Method) proposed by Shin and Paik, 2) two impinger methods using 2% NaOH/3% Na$_2$CO$_3$. (3) same as (2) but with 0.02 N NaHCO$_3$absorbing solution, and (4) the Occupational Safety and Health (OSHA) Method ID-215. An ion chromatograph/visible absorbance detector was used for the analysis of Cr (VI) in sample solution. Limit of detection (LOD) , analytical accuracy, and precision were also tested using Cr (VI) spike samples. Recoveries (as index of accuracy) and coefficient of variation (CV) (as a index of precision) were determined. Two-way ANOVA and Turkey's test were performed to test the significance in differences among recoveries and CVs of the methods. In all the methods, the peaks of Cr (VI) were separated sharply on chromatograms and exhibited a strong linearity with Cr (VI) concentrations in solution. The correlation coefficients of calibration curves typically ranged from 0.9997 to 0.9999, and the analytical LODs from 0.025 to 0.1$\mu\textrm{g}$/sample. All the method had good sensitivities and linearities between Cr (VI) levels and peak areas. The accuracies (% mean recoveries) of the methods ranged from 80.1 to 104.2%, while the precisions (pooled coefficient of variation) ranged from 3.16 to 4.43%. The impinger methods showed higher recoveries ( > 95%) than those of the PVC filter methods (the OSHA Method and the NIOSH/EPA Method). It was assumed that Cr (VI) on PVC filter was exposed to air and reduced to trivalent chromium, Cr (III), whereas it was stabilized in alkali solution contained in impinger. Thus, a special treatment of Cr (VI) samples collected on PVC filters may be required.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.297-303
• /
• 2000

Isotope-dilution inductively coupled plasma mass spectrometry was used to determine trace amounts of Cd, Cu, Pb, Ni and Zn in sediment. Sediment samples were dissolved by microwave digestion with addition of mixed acid ($HNO_3$, HF and $HClO_4$). Lead was determined after separation of alkaline and alkaline earth metals by an ammonium pyrrolidenedithiocarbarmate (APDC) solvent extraction. The other elements were determined after separation of iron, tin and titanium by hydroxide precipitation. Recovery efficiency of the analyte elements was not satisfactory, but most of matrix elements causing the isobaric interference could be effectively eliminated by the separation. Good agreement was achieved with the certified values in the analysis of the two sediment reference materials.

• Journal of Nutrition and Health
• /
• v.42 no.4
• /
• pp.327-337
• /
• 2009

University students tend to have various dietary problems including undesirable dietary behaviors, inadequate intakes of nutrients and biased habits of liquid consumption. This study was conducted to find dietary behaviors (n = 357) by questionnaire survey and to examine dietary nutrient intakes (n = 60) and liquid consumption (n = 853) by food record method for 3-days among university students attended in K University of Chungnam province in Korea. Most subjects lived in the dormitory or self-boarding house, and they skipped breakfast most frequently and took breakfast most irregularly among three meals. Dietary mean intakes of energy, Ca, vitamin B2 and folate were lower than the KDRI (37-85%), and those of males were poorer than those of females. Ratios of energy intake among three meals and snacks were not distributed evenly, so the mean energy intake from snacks was higher and that from breakfast was lower than the ideal ratio, respectively. Daily mean consumption of liquid was 1,526.4 mL/d for males and 1,151.5 mL/d for females, and these intakes were more than the KDRI (1,300 mL/d for males and 1,100 mL/d for females). However, their sources of liquid consumption were not desirable because alcohol, soda, juice of fruit or vegetable and beverage mixed with fruit juice and/or vegetable juice were major sources of liquid as well as drinking water. These findings show that university students have poor dietary behaviors including frequent skipping of breakfast, irregularity of meals, inadequate intakes of nutrients and undesirable pattersirablliquid consumption including high portion of alcohol and soda as alliquid source, and these trends were stronger for males than for females. Therefore, we should endeavor to correct their meal problems id ated to dietary behaviors, nutrient intakes and liquid consumptions through nutrition education.