• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.225-231
• /
• 2018

Benzoic acid, methyl paraben, and butyl paraben are preservatives that have been used in pharmaceutical, cosmetic, and food products. However, as their toxicities for human have been reported, many nations and organizations including Korea have established a regulation limit for thier usage of these preservatives in food products. The present study developed the isotope dilution liquid chromatography mass spectrometry method for accurate determination of three target preseratives in soysauce. In this study, the isotope dilution liquid chromatography mass spectrometry method was developed for accurate determination of three target preservatives in soy sauce. LC separation was optimized considering the pKa of benzoic acid which is lower than those of methyl and butyl parabens. A C18 column was used with 5 mM ammonium acetate and methanol as mobile phases. Mass spectrometry was operated in negative mode and selected reaction monitoring mode (SRM). Soy sauce sample was cleaned-up with C18 SPE cartridge for removing matrix inferences and color material. Optimized conditions and the method were validated with soy sauce reference materials for the analysis of food preservatives from Health Science Authority in Singapore. The measured values of benzoic acid, methyl and butyl paraben agreed well with reference values within their uncertainties.

• Clean Technology
• /
• v.16 no.2
• /
• pp.124-131
• /
• 2010

Effects of $Ca(OH)_2$ concentration (0.16~0.64 wt%), surfactant concentration (2~16 wt%), total volumetric flow rate (3~6 L/min) and $CO_2$ volume fraction $(0.3{\sim}0.6)$ on morphology, crystal structure, mean particle diameter, aggregation and specific surface area of the precipitated $CaCO_3$ were investigated in the slurry bubble column reactor. Experiments were carried out in acrylic reactor ($0.11\;m-ID{\times}1.0\;m-high$) with a internal tube ($0.04\;m-ID{\times}1.0\;m-high$h). The reaction time of $CaCO_3$ synthesis decreased with adding Dispex N40 of the anionic surfactant. The reaction rate of $Ca(OH)_2$ increased with increasing the volumetric flow rate of $CO_2$. From SEM images, the single crystal of $CaCO_3$ increased with increasing the reaction rate in the saturated concentration of $Ca(OH)_2$ (0.16 wt %) and the concentration of Dispex N40 (2 wt%). The mean particle size of $CaCO_3$ varied with adding Dispex N40. In addition, the specific surface area of $CaCO_3$ increased with adding of surfactant (2 wt%) from $35m^2/g$ to $44m^2/g$ at the volumetric flow rate of $CO_2$ (0.9 L/min) and the concentration of $Ca(OH)_2$(0.64 wt %).

• Korean Journal of Radiology
• /
• v.22 no.4
• /
• pp.502-512
• /
• 2021

Objective: To objectively and subjectively assess and compare the characteristics of monoenergetic images [MEI (+)] and polyenergetic images (PEI) acquired by dual-energy CT (DECT) of patients with breast cancer. Materials and Methods: This retrospective study evaluated the images and data of 42 patients with breast cancer who had undergone dual-phase contrast-enhanced DECT from June to September 2019. One standard PEI, five MEI (+) in 10-kiloelectron volt (keV) intervals (range, 40-80 keV), iodine density (ID) maps, iodine overlay images, and Z effective (Z_eff) maps were reconstructed. The contrast-to-noise ratio (CNR) and the signal-to-noise ratio (SNR) were calculated. Multiple quantitative parameters of the malignant breast lesions were compared between the arterial and the venous phase images. Two readers independently assessed lesion conspicuity and performed a morphology analysis. Results: Low keV MEI (+) at 40-50 keV showed increased CNR and SNR_{breast lesion} compared with PEI, especially in the venous phase ([CNR: 40 keV, 20.10; 50 keV, 14.45; vs. PEI, 7.27; p < 0.001], [SNR_{breast lesion}: 40 keV, 21.01; 50 keV, 16.28; vs. PEI, 10.77; p < 0.001]). Multiple quantitative DECT parameters of malignant breast lesions were higher in the venous phase images than in the arterial phase images (p < 0.001). MEI (+) at 40 keV, ID, and Z_eff reconstructions yielded the highest Likert scores for lesion conspicuity. The conspicuity of the mass margin and the visual enhancement were significantly better in 40-keV MEI (+) than in the PEI (p = 0.022, p = 0.033, respectively). Conclusion: Compared with PEI, MEI (+) reconstructions at low keV in the venous phase acquired by DECT improved the objective and subjective assessment of lesion conspicuity in patients with malignant breast lesions. MEI (+) reconstruction acquired by DECT may be helpful for the preoperative evaluation of breast cancer.

• Nutrition Research and Practice
• /
• v.6 no.4
• /
• pp.277-285
• /
• 2012

The purposes of this study were to determine phenolic compounds and to evaluate antioxidant activities of plums (Soldam, Oishiwase and Formosa). Soldam contains the highest amount of total phenolics among cultivars (Formosa: 4.0%, Oishiwase: 3.3%, Soldam: 6.4% for total phenolic) as well as the total flavonoids of which constituents were mainly myricetin and anthocyanidin. The antioxidant activities were measured by DPPH, ABTS radical scavenging, and SOD-like activities. The DPPH radical scavenging activity of Korean plum extracts (200 ${\mu}g/mL$) showed more than 43%, and the Soldam turned out to be the highest : ID50 value: 160-177 ${\mu}g/mL$ for Formosa and Oishiwase; 58-64 ${\mu}g/mL$ for Soldam. The ABTS radical scavenging activity of Korean plum extracts (200 ${\mu}g/mL$) was found to be more than 50%. The SOD-like activity of Korean plum extracts (200 ${\mu}g/mL$) showed more than 70%. Among three kinds of cultivars, Soldam had the highest antioxidant activity. The nitrite scavenging activity of Soldam was 61.5%, which is the highest, compared with that of the other cultivars, about 50%. From these results, Korean plums turned out to be phytochemical rich fruit as well as to show high antioxidant activities.

• Journal of KIISE:Software and Applications
• /
• v.34 no.5
• /
• pp.419-430
• /
• 2007

It is very important to track whether software is properly developed according to requirements. This study suggests a method to track requirements by using a tracking table. In this study, the tracking table indicates why such requirements are included by detailing the content of requests for proposals and proposals. The table also facilitates verification of the consistency between outputs and the integrity by having ID codes of each requirement mapped to each output. Furthermore, as this study was conducted, it was found that some factors were required to be added or supplemented to the outputs at the requirement gathering stage of MaRMI-Ⅲ v.4.0 methodology. Thus, this study seeks to present this additional result along with the enhanced tracking table. By verifying outputs, the tracking table presented in this study will help to reduce all kinds of risks and problems that may occur in software development due to the lack of management of requirements. In addition, the output of the requirement-gathering stage of MaRMI-Ⅲ v.4.0 methodology will be improved/supplemented according to the creation of tracking tables; this will increment the applicability of the MaRMI-III methodology.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.200-207
• /
• 2002

This study was carried out to isolate of antagonistic bacterium against Pythium ultimum and Rhizoctonia solani AG-4, causal pathogens of vegetables damping-off. Total of 600 strains were isolated from soil and plait roots. The isolates were screened for antagonism against Pythium ultimum and Rhizoctonia solani AG-4. One strain, named YJ-37, was sellected for detained study among those microoganisms screened. It was identified as Bacillus ehimensis based on morphological and physiological characterisitics according to the Bergey's mannual of systematic bacteriology, Sherlock system of Microbial ID Inc. and 16S rDNA sequences methods. Furthermore Bacillus ehimensis YJ-37 showed antifungal activities against Alternaria altrata, Collectotrichum gloeosporioides, Didymella bryoniae, Fusarium moniliforme, Fusarium oxysporum, F. oxysporum cucumerinum, F. oxysporum niveum, Gloeosporium sp., Glomerella sp., G. cingulata, G. lagenaria, Penicillium digitatum, P. italicum, Phytophthora capsici, Sclerotinia sclerotiorum, and Stemprhylium solani.

• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.273-277
• /
• 2011

It's a threat for the public health that H1N1 (Influenza virus A) causes disease and transmits among humans. WHO (world health organization) declared that the infections caused by the new strain had reached pandemic proportions. The approved neuraminidase inhibitors (Zanamivir and Oseltamivir) and related investigative drug (BCX-1812) are potent, specific inhibitors of influenza A and B viruses. These drugs are highly effective to prevent influenza A and B infections. Early therapeutic use reduces illness duration and respiratory complications. Recently, we found one of the potent inhibitor of erystagallin A ($IC_{50}$ of 2.04 ${\mu}M$) for neuraminidase target, this inhibitor shows most similar structure to its natural substrate, sialic acid. Therefore, we chose 1l7f to get the receptor structure for docking study among many crystal structures. A docking study has been performed in Surflex-Dock module in SYBYL 8.1. In the present study, we attempt to compare the docking studies of pterocarpin and erystagallin A with neuraminidase receptor structure. In the previous report, the methoxy group of pterocarpin had H-bonding with Arg residues. The present docking results for erystagallin A showed the backbone of hydroxyl group shows significant H-bonding interactions with Arg152 and Arg292. The results showed that erystagallin A interacts more favorably with distinctive binding site rather than original active site. Therefore, we tried to reveal plausible binding mode and important amino acid for this inhibitor using docking and site id search calculations of Sybyl. The results obtained from this work may be utilized to design novel inhibitors for neuraminidase.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.4
• /
• pp.289-299
• /
• 2004

Multi-walled carbon nanotubes (CNTs) were prepared by microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts and methane precursor. The maximum yield (10.3 %) of CNTs was obtained using a methane-hydrogen-nitrogen mixture with volume ratio of 1:1:2 at 1000 W of microwave power. As the microwave power increased up to 1000 W, the deposition yield of CNTs raised from 4.1 % to 10. 3 %. However, the prepared CNTs at 800 W showed the more crystalline structure than those prepared at 1000 W. The prepared CNTs over different binary catalysts had various structural conformations such as aligned cylinder, bamboo, and nanofibers. The Id/Ig value of CNTs over$Fe-Fe/Al_2O_3, $Co-Co/Al_2O_3, and $Co-Cu/Al_2O_3 were in the range of 0.89${\sim}$0.93. Among the various binary catalysts used, $Fe-Co./Al_2O_3 showed the highest yield.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.220-229
• /
• 2004

We have examined a technique of one-dimensional (1D) fluid modeling for radio-frequency Ar capacitively coupled plasmas (CCP) between unequal-sized powered and grounded electrodes. In order to simulate a practical CCP reactor configuration with a grounded side wall by the 1D model, it has been assumed that the discharge space has a conic frustum shape; the grounded electrode is larger than the powered one and the discharge space expands with the distance from the powered electrode. In this paper, we focus on how much a 1D model can approximate a 2D model and evaluate their comparisons. The plasma density calculated by the 1D model has been compared with that by a two-dimensional (2D) fluid model, and a qualitative agreement between them has been obtained. In addition, 1D and 2D calculation results for another reactor configuration with equal-sized electrodes have also been presented together for comparison. In the discussion, four CCP models, which are 1D and 2D models with symmetric and asymmetric geometries, are compared with each other and the DC self-bias voltage has been focused on as a characteristic property that reflects the unequal electrode surface areas. Reactor configuration and experimental parameters, which the self-bias depends on, have been investigated to develop the ID modeling for reactor geometry with unequal-sized electrodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.262-268
• /
• 2005

The unit of the digital content delivery is the web object. For the improvement of the content delivery based on the web, it id required analysis of reference characteristics of the web object. In this study, we analyze reference characteristics of the web object and evaluate the performance. Using these analysis results, we propose the digital content delivery system which is improved delivery efficiency. The goal of the proposed system are the improvement of the processing time through enhancement of the caching efficiency with reflect reference characteristics of the web object. And the experiment result, we verify the performance enhancement.