• 대한치과기공학회지
• /
• 제42권1호
• /
• pp.17-25
• /
• 2020

Purpose: The purpose of this study was to evaluate and compare the accuracy of definitive casts that are fabricated from digital intraoral impression and conventional impression technique. Methods: A master model(ANNA-4, Frasaco GmbH, Tettnang, Germany) with the prepared upper full arch tooth was used. Conventional impression and then stone model(n=10) were produced from this master model, and on the other hands, digital impressions were made with the CS-3600 intraoral scanner(n=10). Six linear measurements were recorded between landmarks, directly on each of the stone models on two occasions by a single examiner. Measurements were made with a digital caliper to the nearest 0.01mm from manual models and with the software(Delcam PowerSHAPE) from the virtual models. The t-student test for paired samples and intraclass correlation coefficient(ICC) were used for statistical analysis. Results: The measurement of two methods showed good reliability. The ICC of the two models were 0.88~0.91(stone model) and 0.94~0.99(digital model). The mean differences to master model for stone model and digital model were 0.10~0.14mm, and 0.14~0.20mm, respectively. Conclusion: The definitive casts obtained with digital intraoral technique model had significantly larger dimensions as compared to those of the stone model. However, the differences to the master model detected appear to provide enough accuracy and reliability for clinical application.

• 대한치과교정학회지
• /
• 제42권5호
• /
• pp.235-241
• /
• 2012

Objective: The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods: The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results: The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions: The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear.

• 한국콘텐츠학회논문지
• /
• 제12권10호
• /
• pp.357-364
• /
• 2012

치과용 스캐너를 기반으로 하는 디지털 모형은 기존의 전통적인 석고모형을 대체할 만큼 발전되고 있다. 본 연구의 목적은 디지털모형의 정확도와 신뢰도를 평가하고자 하였다. 상악의 전악모형을 주 모형으로 설정하여 주 모형으로부터 석고모형을 제작하였고(N=10), 치과용 백색광 스캐너를 이용하여 10개의 디지털모형 데이터를 채득하였다. 제작된 두 실험군(석고모형, 디지털모형)을 1명의 검사자가 2회에 걸쳐서 6곳의 계측지점을 측정하였다. 짝 표본 t-검정과 급내 상관계수을 이용하여 통계적인 분석을 하였다. 실험결과 측정값의 검사자 내 신뢰도는 급내 상관계수 결과 두 실험군 0.75에서 0.87의 범위를 보였다. 석고모형과 디지털 모형의 평균 오차값은 0.11mm에서 0.23mm의 범위를 나타내었고, 모든 계측지점에서 통계적으로 유의한 차이를 보였다(P<0.05). 본 실험결과 모든 계측지점에서 적정수준의 정확성은 확보되지 않았으나, 선행연구에 비추어 볼 때 임상적인 효용성은 검증되었다. 추가적으로 임상적인 사례를 통해 평가되어야 할 것으로 사료된다.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.121-128
• /
• 2012

Purpose: The aim of this study was to determine the reliability and accuracy of measurements in digital models(CEREC$^{(R)}$ AC) compared to stone models. Methods: A master model(500B-1, Nissin Dental Product, Japan) with the prepared upper full arch tooth was used. Conventional impression and then stone model(n=10) were produced from this master model, and on the other hands, digital impressions were made with the CEREC$^{(R)}$ AC intra-oral scanner(n=10). One examiner measured two times the intercanine, intermolar distance, dental arch length. The stone model were measured using a digital caliper. The t-student test for paired samples and intraclass correlation coefficient(ICC) were used for statistical analysis. Results: The measurement of two methods showed very good reliability. At the intra-examiner reliability of measurement, ICC at the stone and CEREC$^{(R)}$ AC model were 0.81 and 0.94. The mean difference between measurements made directly on the stone models and those made on the CEREC$^{(R)}$ AC model was 0.20~0.28mm, and was statistically significant(P=0.001). Conclusion: These in vitro studies show that accuracy of the digital impression is similar to that of the conventional impression. These results will have to be confirmed in further clinical studies.

• 대한간호학회지
• /
• 제45권1호
• /
• pp.107-117
• /
• 2015

Purpose: The purpose of this study was to evaluate the psychometric properties of the Korean version of the Alzheimer's Disease Knowledge Scale (ADKS-K) to determine its applicability to Korean adults. Methods: Cross-cultural validity was performed according to Consensus-based Standards for the Selection of Health Measurement Instruments (COSMIN). The Kuder-Richardson Formula 20 for internal consistency and Intraclass Correlation Coefficient (ICC) for test-retest reliability were conducted. Content validity, criterion related validity and construct validity were evaluated. The Classical Test Theory (CTT) model and the Item Response Theory (IRT) model were applied in performing the item analysis. Results: The KR 20 was .71, and the ICC was .90, indicating that the ADKS-K has internal consistency and stability reliability. Thirty items of the ADKS-K had significant Content Validity Ratio (CVR) values, i.e., mean of 0.82 and range of 0.60~1.00. Mean item difficulty and discrimination indices calculated by TestAn program were 0.63 and 0.23, respectively. Mean item difficulty and discrimination indices calculated by BayesiAn program were -0.60 and 0.77, respectively. These tests indicate that ADKS-K has an acceptable level of difficulty and discriminating efficiency. Conclusion: Results suggest that ADKS-K has the potential to be a proper instrument for assessing AD knowledge in Korean adults.

• 대한교통학회지
• /
• 제27권6호
• /
• pp.119-127
• /
• 2009

버스의 정시성은 노선특성 및 운수회사의 특성에 의해 많은 영향을 받는 것으로 알려져 왔으나, 과학적인 분석이 미흡한 실정이다. 따라서, 본 연구에서는 노선 및 운수회사 특성에 따른 정시성(차두간격편차 요인)을 모형화 하기 위하여 상관분석 및 선형회귀분석(OLS, Ordinary Least Square)을 통하여 최적설명변수를 선택하고, 위계적인 자료구조를 고려하여 위계적 형태의 자료분석에 많이 사용되는 위계적선형모형(HLM, Hierarchical Linear Model)을 적용하여 정시성에 미치는 요인을 분석하였다. 분석결과, ICC가 0.10으로 분석되어 정시성에 미치는 영향 중 노선특성에 의한 영향이 90%, 회사특성에 의한 영향이 10%로 나타나 OLS보다 HLM 적용이 더 적합한 것으로 나타났다. 버스의 정시성은 노선변수 수준에서 운행대수, 평균차두간격, 대당승객수 순으로 영향이 큰 것으로 나타났으며, 운행대수가 많고 대당승객수가 많은 노선은 정시성과 반비례하고, 평균차두간격과는 비례관계로 분석되었다. 회사변수 수준에서는 회사규모(관리대수)가 클수록, 일반회사 보다는 입찰간선회사가 정시성에 양(+)의 영향을 주는 것으로 분석되었다. 향후 정시성 평가관리시 노선별 운행대수, 평균차두간격, 운수사별 관리차량대수에 의한 영향을 고려하는 것이 필요하며, 정시성을 향상시키기 위해서는 노선의 연장을 짧고, 운수사의 규모가 클 수록 유리하다 할 수 있다.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.76-82
• /
• 2005

In this paper, validation of Driver Steering Model has been conducted. The comparison between the simulation model and vehicle test results shows that the model is very feasible for describing combined human driver and actual vehicle dynamic behaviors. The 3D vehicle model is consisted of 6-DOF sprung mass and 4-quarter car model for vehicle body dynamics. Powertrain model including differential gear and Pacejka tire model are applied. The driver steering model is also validated with vehicle test result. The driver steering model is based on angle and displacement error from the desired path, recognized by driver.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.229-237
• /
• 2020

Objective: To evaluate the construction reproducibility of a composite tooth model (CTM) composed of an intraoral-scanned crown and a cone-beam computed tomography (CBCT)-scanned root. Methods: The study assessed 240 teeth (30 central incisors, 30 canines, 30 second premolars, and 30 first molars in the maxillary and mandibular arches) from 15 young adult patients whose pre-treatment intraoral scan and CBCT were available. Examiner-Reference (3 years' experience in CTM construction) and Examiners-A and Examiner-B (no experience) constructed the individual CTMs independently by performing the following steps: image acquisition and processing into a three-dimensional model, integration of intraoral-scanned crowns and CBCT-scanned teeth, and replacement of the CBCT-scanned crown with the intraoral-scanned crown. The tooth axis angle in terms of mesiodistal angulation and buccolingual inclination of the CTMs constructed by the three examiners were measured. To assess the construction reproducibility of CTMs, intraclass correlation coefficient (ICC) assessments were performed. Results: The ICC values of mesiodistal angulation and buccolingual inclination among the 3 examiners showed excellent agreement (0.950-0.992 and 0.965-0.993; 0.976-0.994 and 0.973-0.995 in the maxillary and mandibular arches, respectively). Conclusions: The CTM showed excellent construction reproducibility in mesiodistal angulation and buccolingual inclination regardless of the construction skill and experience levels of the examiners.

• 대한간호학회지
• /
• 제42권4호
• /
• pp.549-558
• /
• 2012

Purpose: The purpose of this study was to validate the Needs Assessment Tool for Case Management (NATCM) for use with Korean medical aid beneficiaries. Methods: Psychometric testing was performed with a sample of 645 Korean medical aid beneficiaries, which included 41 beneficiaries who were selected using proportional sampling method, to examine intraclass correlation coefficients (ICC). Data were evaluated using item analyses, exploratory factor analysis (EFA), confirmatory factor analysis (CFA), Cronbach's alpha, and ICC. Results: Through psychometric testing the final version of NATCM was found to consist of two subscales: 1) Appropriateness of Health Care Utilization (5 items) and 2) Self Care Ability (6 items). The two subscale model was validated by CFA (RMSEA=.08, GFI=.97, and CFI=.93). Internal consistency measured by Cronbach's alpha was .82, and subscale reliability ranged from .79 to .84. The ICC of the NATCM between case managers was .73 and between case managers and health care professionals. .82. Conclusion: This study suggests that the final version of NATCM is a brief, reliable, and valid instrument to measure needs of Korean medical aid beneficiaries. Therefore, the NATCM can be effectively utilized as an important needs assessment as well as outcome evaluation tool for case management programs in Korea.

• 무역상무연구
• /
• 제12권
• /
• pp.65-84
• /
• 1999

During the past few decades, we have witnessed three approaches to overcome the legal disparities between trading countries: - determining the individual governing law in accordance with the conflict of laws principle; - unifying and harmonizing private international law into uniform rules and substantive laws under the auspices of ICC, UNCITRAL, UNIDROIT and various NGOs ; and - drafting model laws like the UNCITRAL Model Law on Electronic Commerce and promoting member countries to enact them. Against this backdrop, the United Nations Convention on Contracts for the International Sale of Goods (CISG) and the process by which it was adopted, established the benchmark for the unification of commercial law. The CISG, completed in 1980, merged civil and common law concepts and came into force in 1988 after a certain number of countries endorsed the treaty. Besides the CISG, the U.N. Limitations Convention and the UNIDROIT Principles of International Commercial Law, to name a few, have attempted to set cross-border legal norms and standards in the international business transactions. However, since the advent of computer-based commerce, there have emerged all-out efforts to establish uniform rules before national legal systems have been developed. As a consequence, the Model Law on Electronic Commerce has become a specimen legislation covering functional equivalents of paper-based writing and signature. For the credit enhancement exemplified by the Uniform Rules for Demand Guarantees (ICC Publication No.458), the UNCITRAL prepared the U.N. Convention on Independent Guarantees and Stand-by Letters of Credit, which was adopted by the U.N. General Assembly in 1995 but remains still not effective as only two countries have ratified this treaty so far. In this connection, two draft conventions underway at UNIDROIT and UNCITRAL deserve our attention as the probability of unification in the Korean Peninsula is mounting. They are to create security interests for commercial finance in moveable equipment and accounts receivable. The UCC-type security rights are regarded to be useful to enable the North Koreans with limited properties to borrow from the banks.