• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.16-21
• /
• 2007

CMOS variable gain amplifier (VGA) IC designs for the structure monitoring systems of the telemetries were developed. A three stage cascaded VGA using a differential amplifier and a linear-in-dB controller is presented. A proposed VGA is a modified version of a conventional VGA such that the gain is controlled in a linear-in-dB fashion through the current ratio. The proposed VGA circuit introduced in this paper has a dynamic range of 77 dB with 1.5 dB gain steps. It also achieved a gain error of less than 1.5 dB over 77 dB gain range. The VGA can operate up to 10MHz dissipating 13.8 mW from a single 1.8 V supply. The core area of the VGA fabricated in a Magnachip $0.18{\mu}m$ standard CMOS process was about $430{\mu}m{\times}350{\mu}m$. According to measurement results, we can verify that the proposed method is reasonable with regard to the enhancement of dynamic range and the better linear-in-dB characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.99-108
• /
• 2015

The embedded microcontroller which is operated by the logic gates synchronized on the clock pulse, is gradually used as main controller of mission-critical systems. Severe electrical situations such as high voltage/frequency surge may cause malfunctioning of the clock source. The tolerant system operation is required against the various external electric noise and means the robust design technique is becoming more important issue in system clock failure problems. In this paper, we propose on-chip backup clock change architecture for the automatic clock failure detection. For the this, we adopt the edge detector, noise canceller logic and glitch-free clock changer circuit. The implemented edge detector unit detects the abnormal low-frequency of the clock source and the delay chain circuit of the clock pulse by the noise canceller can cancel out the glitch clock. The externally invalid clock source by detecting the emergency status will be switched to back-up clock source by glitch-free clock changer circuit. The proposed circuits are evaluated by Verilog simulation and the fabricated IC is validated by using test equipment electrical field radiation noise

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5317-5323
• /
• 2013

Breast cancer is the most prevalent cancer and one of the leading causes of death among women in the world. Plants and herbs may play an important role in complementary or alternative treatment. The aim of this study was to evaluate the antioxidant and anti-proliferative potential of Urtica dioica. The anti oxidant activity of an aqueous extract of Urtica dioica leaf was measured by MTT assay and the FRAP method while its anti-proliferative activity on the human breast cancer cell line (MCF-7) and fibroblasts isolated from foreskin tissue was evaluated using MTT assay. Mechanisms leading to apoptosis were also investigated at the molecular level by measuring the amount of anti and pro-apoptotic proteins and at the cellular level by studying DNA fragmentation and annexin V staining by flow cytometry. The aqueous extract of Urtica dioica showed antioxidant effects with a correlation coefficient of $r^2$=0.997. Dose-dependent and anti-proliferative effects of the extract were observed only on MCF-7 cells after 72 hrs with an $IC_{50}$ value of 2 mg/ml. This anti proliferative activity was associated with an increase of apoptosis as demonstrated by DNA fragmentation, the appearance of apoptotic cells in flow cytometry analysis and an increase of the amount of calpain 1, calpastatin, caspase 3, caspase 9, Bax and Bcl-2, all proteins involved in the apoptotic pathway. This is the first time such in vitro antiproliferative effect of aqueous extract of Urtica dioica leaf has been described for a breast cancer cell line. Our findings warrant further research on Urtica dioica as a potential chemotherapeutic agent for breast cancer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.77-77
• /
• 1998

Present silicon dioxide (SiOz) 떠m as intennetal dielectridIMD) layers will result in high parasitic c capacitance and crosstalk interference in 비gh density devices. Low dielectric materials such as f f1uorina뼈 silicon oxide(SiOF) and f1uoropolymer IMD layers have been tried to s이ve this problem. I In the SiOF ftlm, as fluorine concentration increases the dielectric constant of t뼈 film decreases but i it becomes unstable and wa않r absorptivity increases. The dielectric constant above 3.0 is obtain어 i in these ftlms. Fluoropolymers such as polyte$\sigma$따luoroethylene(PTFE) are known as low dielectric c constant (>2.0) materials. However, their $\alpha$)Or thermal stability and low adhesive fa$\pi$e have h hindered 야1리ru뚱 as IMD ma따"ials. 1 The concept of a plasma processing a찌Jaratus with 비gh density plasma at low pressure has r received much attention for deposition because films made in these plasma reactors have many a advantages such as go여 film quality and gap filling profile. High ion flux with low ion energy in m the high density plasma make the low contamination and go어 $\sigma$'Oss피lked ftlm. Especially the h helicon plasma reactor have attractive features for ftlm deposition 야~au똥 of i앙 high density plasma p production compared with other conventional type plasma soun:es. I In this pa야Jr, we present the results on the low dielectric constant fluorocarbonated-SiOF film d밑JOsited on p-Si(loo) 5 inch silicon substrates with 00% of 0dFTES gas mixture and 20% of Ar g gas in a helicon plasma reactor. High density 띠asma is generated in the conventional helicon p plasma soun:e with Nagoya type ill antenna, 5-15 MHz and 1 kW RF power, 700 Gauss of m magnetic field, and 1.5 mTorr of pressure. The electron density and temperature of the 0dFTES d discharge are measUI벼 by Langmuir probe. The relative density of radicals are measured by optic허 e emission spe따'Oscopy(OES). Chemical bonding structure 3I피 atomic concentration 따'C characterized u using fourier transform infrared(FTIR) s야3띠"Oscopy and X -ray photonelectron spl:’따'Oscopy (XPS). D Dielectric constant is measured using a metal insulator semiconductor (MIS;AVO.4 $\mu$ m thick f fIlmlp-SD s$\sigma$ucture. A chemical stoichiome$\sigma$y of 야Ie fluorocarbina$textsc{k}$영-SiOF film 따~si야영 at room temperature, which t the flow rate of Oz and FTES gas is Isccm and 6sccm, res야~tvely, is form려 야Ie SiouFo.36Co.14. A d dielec$\sigma$ic constant of this fIlm is 2.8, but the s$\alpha$'!Cimen at annealed 5OOt: is obtain려 3.24, and the s stepcoverage in the 0.4 $\mu$ m and 0.5 $\mu$ m pattern 킹'C above 92% and 91% without void, res야~tively. res야~tively.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.158-167
• /
• 2016

This study evaluates potential sources of errors in k-NN(k-nearest neighbor) algorithm such as procedures, variables, and input data. Previous research has been thoroughly reviewed for understanding fundamentals of k-NN algorithm that has been widely used for short-term traffic states prediction. The framework of this algorithm commonly includes historical data smoothing, pattern database, similarity measure, k-value, and prediction horizon. The outcomes of this study suggests that: i) historical data smoothing is recommended to reduce random noise of measured traffic data; ii) the historical database should contain traffic state information on both normal and event conditions; and iii) trial and error method can improve the prediction accuracy by better searching for the optimum input time series and k-value. The study results also demonstrates that predicted error increases with the duration of prediction horizon and rapidly changing traffic states.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.140-140
• /
• 2018

The 3D interconnect technologies have been appeared, as the density of Integrated Circuit (IC) devices increases. Through Silicon Via (TSV) process is an important technology in the 3D interconnect technologies. And the process is used to form a vertically electrical connection through silicon dies. This TSV process has some advantages that short length of interconnection, high interconnection density, low electrical resistance, and low power consumption. Because of these advantages, TSVs could improve the device performance higher. The fabrication process of TSV has several steps such as TSV etching, insulator deposition, seed layer deposition, metallization, planarization, and assembly. Among them, TSV metallization (i.e. TSV filling) was core process in the fabrication process of TSV because TSV metallization determines the performance and reliability of the TSV interconnect. TSVs were commonly filled with metals by using the simple electrochemical deposition method. However, since the aspect ratio of TSVs was become a higher, it was easy to occur voids and copper filling of TSVs became more difficult. Using some additives like an accelerator, suppressor and leveler for the void-free filling of TSVs, deposition rate of bottom could be fast whereas deposition of side walls could be inhibited. The suppressor was adsorbed surface of via easily because of its higher molecular weight than the accelerator. However, for high aspect ratio TSV fillers, the growth of the top of via can be accelerated because the suppressor is replaced by an accelerator. The substitution of the accelerator and the suppressor caused the side wall growth and defect generation. The suppressor was used as Single additive electrodeposition of TSV to overcome the constraints. At the electrochemical deposition of high aspect ratio of TSVs, the suppressor as single additive could effectively suppress the growth of the top surface and the void-free bottom-up filling became possible. Generally, copper was used to fill TSVs since its low resistivity could reduce the RC delay of the interconnection. However, because of the large Coefficients of Thermal Expansion (CTE) mismatch between silicon and copper, stress was induced to the silicon around the TSVs at the annealing process. The Keep Out Zone (KOZ), the stressed area in the silicon, could affect carrier mobility and could cause degradation of the device performance. Cobalt can be used as an alternative material because the CTE of cobalt was lower than that of copper. Therefore, using cobalt could reduce KOZ and improve device performance. In this study, high-aspect ratio TSVs were filled with cobalt using the electrochemical deposition. And the filling performance was enhanced by using the suppressor as single additive. Electrochemical analysis explains the effect of suppressor in the cobalt filling bath and the effect of filling behavior at condition such as current type was investigated.

• The Korea Journal of Herbology
• /
• v.23 no.1
• /
• pp.85-92
• /
• 2008

Objectives : This study was performed to efficiently make Black Panax Ginseng (BPG) and evaluate its antitumor activity. Methods : Panax ginseng was steamed at $95^{\circ}C$ for 3 h, dried and steamed again at $115^{\circ}C$ for 6 h. The main ginsenosides of BPG were $Rg_{3}$, $Rk_{1}$ and $Rg_{5}$. Results : Among the saponins in BPG, the amount of ginsenoside $Rg_{3}$ was determined by HPLC method. The 11.48 mg of ginsenoside $Rg_{3}$ was obtained from lg of dried BPG. The crude saponin fraction (CSF) of BPG was tested in vitro for its cytotoxic activities against various human cancer cell lines, such as ACHN, NCI-H23, HCT-15 and PC-3. The CSF of BPG exhibited stronger cytotoxic activity than that of red Panax ginsneng. CSF of BPG exhibited good cytotoxic activities against ACFIN, HCT-15, and PC-3 cell lines with $IC_{50}$ values of 60.3-90.8 ${\mu}g$/ml. However, CSF of BPG did not show any cytotoxic activity against NCI-H23 cell line. Conclusions : BPG produced by new manufacturing is more effective than BPG produced by existing processing in anticancer activity. And new BPG has a possibility of investigation because of high contents of Rg3, Rk1 and Rg5 that have various phisological activities.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.28-32
• /
• 2001

Major sensory characteristic components-salty(NaCl), sweet(free sugars), palatable tastes(MSG, IMP, GMP) and related components-in soup base of commercial ramyons(25 ramyons, 11 bowl ramyons) were investigated to estimate their use level. $Na^+$ content($18.73{\pm}3.18%$ in ramyons and $17.62{\pm}1.92%$ in bowl ramyons) was determined by IC so that NaCl values (20.90% in ramyons and 18.16% in bowl ramyons) could be calculated from it. And from the assayed results of glutamic acid($10.50{\pm}3.78%$ in ramyons and $10.47{\pm}1.68%$ in bowl ramyons) by LC, MSG values were 12.08% in ramyons and 12.04% in bowl ramyons. GMP and IMP contents were $0.15{\pm}0.06%$, $0.20{\pm}0.11%$ in ramyons and $0.14{\pm}0.03%$, $0.18{\pm}0.05%$ in bowl ramyons, respectively. In addition, free sugars contained in ramyons such as sucrose, glucose and fructose were also analyzed by LC. In order to compare the sweetness, the free sugars were multiplied by conversion factor(sucrose 1, glucose 0.7, fructose 1.1), which showed $19.85{\pm}5.68%$ in ramyons and $18.02{\pm}7.82%$ in bowl ramyons. Therefore it is concluded that the analytical method of $Na^+$, glutamic acid and free sugars can be used as a simple and exact technique for the determination of NaCl, MSG and sweetness of ramyons.

• Journal of Haehwa Medicine
• /
• v.4 no.1
• /
• pp.211-223
• /
• 1995

The antitumor effect of 柴胡(Bupleuri Radix : BP), 茵陳(Artemisiae capillaris Herba; ACH) 및 蒲公英(Taraxaci Herba; TH) and 蒲公英 EE層(Ethyl ether layer of TH; EETH) on human hepatocytes such as Hep G2, PLC and Hep 3B, and synergistic action with the anticancer drugs, that is, mitomycin(MMC), cisplatin(CPT) and 5-fluorouracil(5-FU) were studied by the method of MTT. The results were obtained as follows: 1. $IC_{50}$ against Hep G2, PLC and Hep 3B was $15.5{\mu}g/ml$, $25.4{\mu}g/ml$ and 31.25 in MMC, $92.5{\mu}g/ml$, $50.2{\mu}g/ml$ and $62.5{\mu}g/ml$ in CPT and $125{\mu}g/ml$ in 5-FU respectively. 2. Cytotoxic effect on Hep G2 was obvious in BP-treated group, synergistic action was most effective in TH-treated group or with MMC. 3. Cytotoxic effect on Hep 3B was obvious in ACH-treated group, synergistic action was most effective in ACH-treated group or with MMC. 4. Cytotoxic effect on PLC was obvious in ACH-treated group, synergistic action was most effective in TH-treated group or with MMC. From above results it was concluded that ACH showed the best antitumor effect against PLC and Hep 3B, BP aganst Hep G2 and also synergistic effect was most effective with MMC, which indicates that it is necessary to seperate the antitumor substances in ACH.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.22-28
• /
• 2014

In this study, we conducted the anti-HIV-1 enzymes assay in vitro and its active components were predicted by QSAR in silico for the elucidation of action mechanism on anti-HIV of natural resources. The extracts of Gardenia jasminoides var. radicans Makino were tested for their inhibitory effects on the reverse transcriptase (RT), protease and ${\alpha}$-glucosidase. In the enzyme inhibition assay, the methanol extracts of Gardenia jasminoides var. radicans Makino stem showed a strong activity of 32.5% on the enzyme activity to cleave an oligopeptide, resembling one of the cleavage sites in the viral polyprotein which can only be processed by HIV-1 protease. Moreover the methanol extracts of stem exhibited alpha-glucosidase inhibitory activities of 26.1%. The methanol extracts ($100{\mu}g/ml$) of stem showed a weak activity of 13.4% on anti-HIV-1 RT using Enzyme Linked Oligonucleotide Sorbent Assay (ELOSA) method. However, all extracts of leaf and stem didn't exhibit the HIV-1-induced cytopathic effects with IC (inhibitory concentration) of $100{\mu}g/ml$ in HIV-1-infected human T-cell line. From these results, it is suggested that Gardenia jasminoides var. radicans Makino extracts may possibly be involved in the inhibition of reverse transcriptase, protease and alpha-glucosidase but can't vitally concerned with the viral replication in vitro.