• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.91-96
• /
• 2005

Proper choice of source populations contributes to the ultimate success of selection for genetic improvement. The source population should possess the most desirable alleles at as many loci as possible for intra population improvement. Such desirable alleles can be intensified by introgression of exotic germ plasm into locally adapted ones through hybridization followed by selection. The objectives of this study were to determine the mean performance, genetic variability $({\sigma}^2G)$ and heritability of fresh ear yield and other important traits within two sweet corn source populations, $BC1-10{\times}Syn-II$ and BC2-10. One hundred selfed progenies from each of the two source populations were evaluated in a $10\times10$ lattice design, at the Institute of Bioscience (IBS) Farm, University of Putra Malaysia (UPM) following the recommended cultural practices. Significant differences among selfed progenies within $BC1-10{\times}Syn-II$ were observed for all traits, while differences among selfed progenies within BC2-10 were noted for fresh ear yield, ear length, ear diameter, number of kernels per row, ear height, days to tasseling and days to silking. Progenies developed from $BC1-10{\times}Syn-II$ population had higher estimates of ${\sigma}^2G$ than did progenies from BC2-10 population for number of kernel rows per ear, total soluble solids, plant height, days to tasseling and days to silking, showing that selection to improve these traits would be more effective in selfed progenies of $BC1-10{\times}Syn-II$ than that in BC2-10. On the other hand, progenies developed from BC2-10 population had higher estimates of ${\sigma}^2G$ for ear length, ear diameter and ear height, indicating that progenies from this population would have better genetic gain than $BC1-10{\times}Syn-II$. Comparable estimates of genetic variance were found for fresh ear yield, and number of kernels per row, indicating that genetic improvement of the two source populations is expected to produce similar genetic gains for these two traits. Therefore, selfed progenies developed from both source populations could be used to improve the two populations for various traits and thereby develop superior genotypes for immediate use in the production system.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.4
• /
• pp.727-738
• /
• 2012

The purpose of the present study was to determine the effect of a 4 week course of Cox distraction manipulation (CDM) combined with therapeutic modalities on the treatment of patients with L4-5 herniated nucleus pulposus (HNP). A total of 15 patients with L4-5 HNP (mean age, 37.76 years; age range 20-50years) participated in the study. A 4 week course of CDM combined with therapeutic modalities was delivered to the patients for 6 days per week for the first two weeks, and three times per week for two additional weeks. The entire treatment consisted of 18 visits over 4 week period. Comparisons of changes in the muscle strengthening (MS), straight leg raise (SLR), and oswestry disability index (ODI) at pre-intervention, after two weeks treatment sessions, and at discharge (after 18 treatment sessions) were analyzed. Comparisons of changes in the disc herniation index (DHI) at pre-intervention and at discharge were analyzed using the paired t-test. There were significant improvements in the outcome measures of MS Ibs, SLR test, and ODI score after 2 weeks and 4 weeks sessions of CDM combined with therapeutic modalities as compared with the pre-intervention. However, no significant different pre-test and post-test DHI. CDM combined with therapeutic modalities appears to be a safe and efficacious, noninvasive treatment modality for patients with L4-5 HNP.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.10 no.2
• /
• pp.121-131
• /
• 2006

Background : As each human has a look in the face of oneself, he or she has a look of him or herself in the shape of the body also. And for the shape of the body which gives a big clue in diagnosis in musculoskeletal disorders. Therefor many means are used and developed for diagnosis through body shape or posture analysis for musculoskeletal disorders. X-ray, CT, MRI has been used for diagnosis through image in this way to tell about the inside of the human body. On the other side, moire topography was used for information about the exterior of the human body, but yet only minimal information such as the number of contour lines in each side was available. Therefor there were a few studies to use moire topography or other methods to get information about the surface of the human body in numeric values. The instrument used in this study which is a laser projection moire, is another trial to get numeric data about the surface of the human body. The instrument is composed of laser projector and a computer software to recompose and analyse the image data into depth, height, angle and length. Objectives : The study was focused on whether the instrument is reliable for clinic use, and to seek the proper environment and posture for the examination, and among the data the software provides, which items are more reliable and useful. Methods : For reproductivity and repeatability, 4 testers tested 2 persons. And to how if the body shape changes according to the posture and which posture gives the most reliable data, the test was performed in 6 different positions. Results : Result, the instrument showed sufficient repeatability and reproductivity for clinical use. And among the items the software provides, the length of the back, the angle of the back in the sagittal and coronal plane showed reliable results. And there was difference in the results according to the posture, and Therefor, in following studies using this instrument or similar type of posture analysing instruments, the length of the back, the angle of the back in the sagittal and coronal plane could be reliable item to use.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.141-145
• /
• 2014

There is a burgeoning number of products on the market that contain probiotics, but do they do you any good? What exactly are probiotics? They have been defined as living organisms that, when ingested in sufficient quantities, provide health benefits beyond basic nutrition. They are often referred to as "friendly bacteria" or "good bacteria." Probiotics have been claimed, amongst other things, to (i) reduce the incidence of colon cancer and other diseases of the colon, such as IBS, (ii) stimulate the immune system, (iii) have anti-hypertensive and anti-cholesterolemic properties, (iv) mitigate against the effect of antibiotics on the intestinal microbiota, and (v) protect against gastrointestinal infections. However, the scientific basis for many of these claims is not well-established. Indeed, the European Food Safety Authority has denied the use of several health claims associated with probiotics, particularly those related to mitigation of diarrhea following consumption of antibiotics. Thus, there is a need for research on the mechanisms of action of probiotics. We have been mainly interested in the use of probiotics to control enteric infections. There are several possible modes of action to explain how probiotics may protect the host from enteric pathogens, including competitive exclusion and immunomodulation. We have shown that probiotics produce bioactive molecules that interfere with bacterial cell-cell communication (also called quorum sensing), and this results in a down-regulation of virulence genes that are responsible for attachment of the pathogen to the gastrointestinal epithelium. These bioactive molecules act on a variety of bacteria, including enterohemorrhagic and enterotoxigenic Escherichia coli, Salmonella, Clostridium difficile and Clostridium perfringens, and there is evidence that they can inhibit the formation of biofilms by Listeria monocytogenes. These bioactive molecules, which are peptidic in nature, can exert their effects not only in vitro but also in vivo, and we have shown that they mitigate against E. coli O157:H7 and Salmonella in mice and Salmonella and E. coli K88 infections in pigs. They can be delivered in foods such as yoghurt and maintain their activity.

• Journal of Plant Biotechnology
• /
• v.48 no.1
• /
• pp.34-43
• /
• 2021

Targeted genome editing using the CRISPR/Cas9 system is a ground-breaking technology that is being widely used to produce plants with useful traits. However, for woody plants, only a few successful attempts have been reported. These successes have used Agrobacterium-mediated transformation, which has been reported to be very efficient at producing genetically modified trees. Nonetheless, there are unresolved problems with plasmid sequences that remain in the plant genome. In this study, we demonstrated a DNA-free genome editing technique in which purified CRISPR/Cas9 ribonucleoproteins (RNPs) are delivered directly to the protoplasts of a hybrid poplar (Populus alba × Populus glandulosa). We designed three single-guide RNAs (sgRNAs) to target the stress-associated protein 1 gene (PagSAP1) in the hybrid poplar. Deep sequencing results showed that pre-assembled RNPs had a more efficient target mutagenesis insertion and deletion (indel) frequency than did non-assembled RNPs. Moreover, the RNP of sgRNA3 had a significantly higher editing efficacy than those of sgRNA1 and sgRNA2. Our results suggest that the CRISPR/Cas9 ribonucleoprotein-mediated transfection approach is useful for the production of transgene-free genome-edited tree plants.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.91-98
• /
• 2021

The installation and performance test of the ISOL (Isotope Separation On Line) system for the generation and separation of Rare Isotopes (RI) beams is in progress at the Rare Isotope Science Project (RISP), Institute for Basic Science (IBS). The various RI beams generated by the ISOL target/ion source go through the beam lines and separators, and only the RI beam desired by the user is selected and transmitted to the superconducting linear accelerator at the downstream of the ISOL. In the ISOL system, two separators are installed to separate a specific RI beam, and control is performed by the Experimental Physics and Industrial Control System (EPICS). In this study, an EPICS IOC (Input-Output Control) was developed to measure the magnetic field of a dipole magnet for mass separation of a multivalent (n+) RI beam in the A/Q separator, which is one of the ISOL RI beam separators. The operational stability of the A/Q separator was tested through a magnetic field measurement using a Hall probe.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.69-81
• /
• 2014

There is a growing interest in the technology transfer and commercialization both at home and abroad. Accordingly, this study looked at the concept of technology transfer and commercialization, identified the factors that should be taken into account in order to facilitate technology transfer and commercialization, and then performed a empirical analysis. As for the conventional technology transfer and commercialization, there was a tendency to limit its scope to the exploration, transfer and commercialization of technology itself. Here in this research, technology transfer and commercialization is defined the category to expand as various activities implemented in order to make sure that intellectual properties such as intangible technological developments, know-how, and knowledge are transferred between the relevant parties through a contract or negotiation, and the party to which the transfer is made can then further develop and exploit the technology into tangible products and other activities to obtain economic benefit out of that. In addition, the findings of the positive analysis of technology transfer and commercialization revealed that the focus of facilitating technology transfer has been on the technology itself, its management and securing efficiency of the systems and institutions involved in the technology transfer and commercialization. So there was lack of recognition as to the importance of financial support given to the phase of technology commercialization. This indicates that when it comes to the technology transfer and commercialization, quantitative performance has been the focus of interest such as patent application, registration, number of technology transfers, royalty, etc. So there was not enough understanding as to the issues of starting up a business, creating quality jobs through technology transfer and commercialization, which are directly related to the realization of the creative economy. In this regard, this research is expected to be used for the development for the future policies to boost technology transfer and commercialization as it suggests not only simply ensuring quantitative performance but also necessary to create the environment for the creation of the stable ecosystem for the parties involved in the technology transfer and commercialization and then to build circumstances in which creative economy can be realized.

• Korean Journal of Plant Resources
• /
• v.30 no.5
• /
• pp.522-534
• /
• 2017

This study was investigated genetic variation in 24 Taraxacum accessions from various regions in South Korea based on the sequences of two chloroplast DNA (cpDNA) regions (trnL-trnF and rps16-trnK). T. mongolicum, T. officinale, and T. laevigatum were triploid, and T. coreanum and T. coreanum var. flavescens were tetraploid. The trnL-trnF region in native Korean dandelions (T. mongolicum, T. coreanum, and T. coreanum var. flavescens) were ranged from 931 to 935 bp in length, and that of naturalized dandelions were ranged from 910 bp (T. officinale) to 975 bp (T. laevigatum) in length. The rps16-trnK region in T. mongolicum, T. coreanum, T. coreanum var. flavescens, T. officinale, and T. laevigatum was 882-883 bp, 875-881 bp, 878-883 bp, 874-876 bp, and 847-876 bp, respectively, in length. The sequence similarity matrix of the trnL-trnF region ranged from 0.860 to 1.00 with an average of 0.949, and that of the rps16-trnK region ranged from 0.919 to 1.000 with an average of 0.967. According to the phylogenetic analysis, the Korean native taxa and naturalized taxa were divided independent clade in two cpDNA region. T. coreanum var. flavescens clustered only with T. coreanum, and there were no significant differences in their nucleotide sequences. The finding that two accessions (T. coreanum; Jogesan, T. mongolicum; Gangyang) had a high level of genetic variation suggests their utility for breeding materials.

• Economic and Environmental Geology
• /
• v.12 no.1
• /
• pp.41-49
• /
• 1979

A literature review is made on the physical and chemical characteristics of clay minerals in acidic solutions from the mineralogical and hydrometallurgical viewpoints. Some of the important characteristics of clays are their ability to cation exchange, swelling, and incongruent dissolution in acidic solutions. Various clay minerals can take up metallic ions from solution via cation exchange mechanism. Generally, cation exchange capacity increases in the following order : kaolinite, halloysite, illite, vermiculite, and montmorillonite. In acidic solutions, the cation uptake such as copper by clay minerals is strongly inhibited by hydrogen and aluminum ions and thus is not economically significant factor for recovery of metals such as uranium and copper. In acidic solutions, the cation uptake is substial. Swelling is minimal at lower pH, possibly due to lattice collapse. Swelling may be controllable with montmorillonite type clays by exchanging interlayer sodium with lithium and/or hydroxylated aluminum species. The effect of add on clay minerals are : 1. Division of aggregates into smaller plates with increase in surface area and porosity. 2. Clay-acid reactions occur in the following order: (i) $H^+$ replacement of interlayer cations, (ii) removal of octahedral cations, such as Al, Fe, and Mg, and (iii) removal of tetrahedral Al ions. Acid attack initiates, around the edges of the clay particles and continued inward, leaving hydrated silica gel residue around the edges. 3. Reaction rates of (ii) and (iii) are pseudo-1st order and proportional to acid concentration. Rate doubles for every temperature increment of $10^{\circ}C$. Implications in in-situ leaching of copper or uranium with acid are : 1. Over the life span of the operation for a year or more, clays attacked by acid will leave silica gel. If such gel covers the surface of valuable mineral surfaces being leached, recovery could be substantially delayed. 2. For a copper deposit containing 0.5% each of clay minerals and recoverable copper, the added cost due to clay-acid reaction is about 1.5c/lb of copper (or 0.93 lbs of $H_2SO_4/1b$ of copper). This acid consumption by clay may be a factor for economic evaluation of in-situ leaching of an oxide copper deposit.

• Radiation Oncology Journal
• /
• v.15 no.2
• /
• pp.129-136
• /
• 1997

Purpose : We analyzed the survival and failure patterns of cervix cancer patients treated with irradiation alone to evaluate our treatment method and to compare with the others Methods and Materials : Two hundred and twenty cervical cancer patients, Stage IB, II A, and II B who completed the planned treatment between Mar 1987 and December 1991 were analyzed retrospectively. The Stage IB patients were restaged to the Stage IB1 and IB2 by the recently revised FIGO classification, Patients were treated with a combination of external irradiation and the intracavitary brachytherapy Determination of the tumor control was done at the time of 6 months Postirradiation. The follow-up time was ranged from 3 to 115 months and the mean was 62 months and the follow-up rate was $93.6\%$(206/220) Results : The overall 5-year survival rate of Stage IB1 (N=50), IB2(N: 15). II A(N=58), and II B(N=97) was $94\%,\;87\%,\;69\%,\;and\;56\%$. respectively. In the univariate analysis of prognostic factors, stage(0.00), initial Hg level (P=0.00), initial TA-4(tumor-associated) antigen level(p= 0.02), initial CEA level(p=0.02), barrel-shaped tumor(p=0.02), whole cervical involvement (0.00), pelvic tyrnphadenopathy(LAP) in CT(p=0.04), and Post-irradiation adiuvant chemotherapy(P=0.00) were statistically significant in survival analysis. In a while multivariate analysis showed that the stage was the most powerful Prognostic indicator and the Post-irradiation chemotherapy factor also showed the statistical significance. The overall local control rate was $81\%$ and by the stage, $100\%$ in Stage IBI, $86.7\%$ in Stage IBS, $84.5\%$ in Stage IIA, and $68.1\%$ in Stage IIB, respectively The overall tumor recurrence rate was $15.5\%$(27/174) and by the stage, $8\%$(4/50) in Stage IB1, $0\%$(0/l3) in Stage IB2, $22.4\%$(l1/49) in Stage II A, and $19.4\%$(12/62) in Stage II B, respectively. Conclusions : We obtained the similar treatment results to the other's ones in early stage cervical cancer patients. But in Stage II B, the local control rate was lower than that of the other institutes and also the survival was poorer. So it seems to be necessary to reevaluate the treatment method in advanced cervical cancer patients.