• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.58-64
• /
• 2012

Purpose: The objective of this study was to investigate the feasibility of anaerobic digestion of Chinese cabbage waste juice (CCWJ) and swine manure(SM). Methods: The anaerobic digestion test was conducted under batch and continuous conditions at mesophilic temperature ($36-38^{\circ}C$). The batch test was divided into Experiment I and II. In the Experiment I, biogas potential and production rate of CCWJ was evaluated. In Experiment II the effect of F/M ratio (2.0, 3.2, 4.9) at mixture ratio of 25:75(CCWJ: SM, % vol. basis) on biogas yield was studied. Results: CCWJ produced biogas and methane yield of 929 and 700 mL/g VS added respectively. The biogas yield from the mixture of CCWJ and SM was almost same at F/M ratio of 2.0 and 3.2 but dropped by 14% when F/M ratio increased from 3.2 to 4.9. In continuous test the mixture of CCWJ and SM (25:75, % vol. basis) produced biogas yield of 352 mL/g VS added which is around 11% higher compared to biogas yield from SM alone. Addition to biogas yield digester performance was also improved with co-digestion of CCWJ with SM. Conclusions: The results showed that the anaerobic digestion of CCWJ with SM could be promising for improving both the biogas yield and digester performance at mesophilic temperature.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.77-87
• /
• 2010

Hospital-acquired methicillin-resistant Staphylococcus aureus (MRSA) has been an increasing problem worldwide since the initial reports over 40 years ago. To examine new drug leads with potential antibacterial activities, Various N'-[(-3-substituted-4-oxo-1,3-thiazolidin-2-ylidene]-4-hydroxy benzohydrazide (4a-4.i) and N'-[-(3,4-disubstituted)-1,3-thiazolidin-2ylidene)]-4-hydroxybenzohydrazide from (5.a-5.i) to (10.a-10.i) were synthesized using appropriate synthetic route. The entire test compounds (4.a-4.i) and from (5.a-5.i) to (10.a-10.i) were assayed in vitro against s. aureus strain. The minimum inhibitory concentration (MIC) was determined for test compounds and for reference standards. The test compounds showed significant antibacterial activity against the strains used, when tested in vitro. In general, p-hydroxybenzohydrazide ring and substituted thiazoline ring are essential for antimicrobial activity. Among the compounds tested, compounds 6.f, 7.g, 9.f and 10.f, 10 i were found to be most potent. The test compounds were found nontoxic upto the dose level of 2000 ${\mu}g$/mL. The intact compounds were then subjected for 3D-QSAR studies. 3D-QSAR study based on the principal of alignment of pharmacophoric features by Schrodinger PHASE module. The 3D-QSAR study allowed us to confirm the preferential binding mode of p-hydroxybenzohydrazide inside the active site.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3690-3713
• /
• 2019

According to the main group key management schemes logical key hierarchy (LKH), exclusion basis systems (EBS) and other group key schemes are limited in network structure, collusion attack, high energy consumption, and the single point of failure, this paper presents a group key management scheme for wireless sensor networks based on Lagrange interpolation polynomial characteristic (AGKMS). That Chinese remainder theorem is turned into a Lagrange interpolation polynomial based on the function property of Chinese remainder theorem firstly. And then the base station (BS) generates a Lagrange interpolation polynomial function f(x) and turns it to be a mix-function f(x)' based on the key information m(i) of node i. In the end, node i can obtain the group key K by receiving the message f(m(i))' from the cluster head node j. The analysis results of safety performance show that AGKMS has good network security, key independence, anti-capture, low storage cost, low computation cost, and good scalability.

• Tribology and Lubricants
• /
• v.38 no.3
• /
• pp.84-92
• /
• 2022

In Part I, developed was a method to obtain the stress field due to an edge dislocation that locates in an elastic half plane beneath the contact edge of an elastically similar square wedge. Essential result was the corrective functions which incorporate a traction free condition of the free surfaces. In the sequel to Part I, features of the corrective functions, F_kij,(k = x, y;i,j = x,y) are investigated in this Part II at first. It is found that F_xxx(ŷ) = F_xyx(ŷ) where ŷ = y/η and η being the location of an edge dislocation on the y axis. When compared with the corrective functions derived for the case of an edge dislocation at x = ξ, analogy is found when the indices of y and x are exchanged with each other as can be readily expected. The corrective functions are curve fitted by using the scatter data generated using a numerical technique. The algebraic form for the curve fitting is designed as F_kij(ŷ) = $\frac{1}{\hat{y}^{1-{\lambda}}I+yp}$$\sum_{q=0}^{m}{\left}$$\left[A_q\left(\frac{\hat{y}}{1+\hat{y}} \right)^q \right]$ where λ_I=0.5445, the eigenvalue of the adhesive complete contact problem introduced in Part I. To investigate the exponent of F_kij, i.e.(1 - λ_I) and p, Log|F_kij|(ŷ)-Log|(ŷ)| is plotted and investigated. All the coefficients and powers in the algebraic form of the corrective functions are obtained using Mathematica. Method of analyzing a surface perpendicular crack emanated from the complete contact edge is explained as an application of the curve-fitted corrective functions.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.3
• /
• pp.467-482
• /
• 2010

For a double array of random elements {$V_{mn};m{\geq}1,\;n{\geq}1$} in a real separable Banach space, some mean convergence theorems and weak laws of large numbers are established. For the mean convergence results, conditions are provided under which $k_{mn}^{-\frac{1}{r}}\sum{{u_m}\atop{i=1}}\sum{{u_n}\atop{i=1}}(V_{ij}-E(V_{ij}|F_{ij})){\rightarrow}0$ in $L_r$ (0 < r < 2). The weak law results provide conditions for $k_{mn}^{-\frac{1}{r}}\sum{{T_m}\atop{i=1}}\sum{{\tau}_n\atop{j=1}}(V_{ij}-E(V_{ij}|F_{ij})){\rightarrow}0$ in probability where {$T_m;m\;{\geq}1$} and {${\tau}_n;n\;{\geq}1$} are sequences of positive integer-valued random variables, {$k_{mn};m{{\geq}}1,\;n{\geq}1$} is an array of positive integers. The sharpness of the results is illustrated by examples.

• Nuclear Engineering and Technology
• /
• v.34 no.5
• /
• pp.468-481
• /
• 2002

There are 4 CANDU6 type reactors operating at Wolsong site. For fuelling operation of certain fuel channels (with flow less than 21.5 kg/s) a FARE flow Assist Ram Extension) device is used. During the refuelling operation, two remote controlled F/Ms (Fuelling Machines) are attached to a designated fuel channel and carry out refuelling job. The upstream F/M inserts new fuel bundles into the fuel channel while the downstream F/M discharges spent fuel bundles. In order to assist fuelling operation of channels that has lower coolant How rate, the FARE device is used instead of F/M C-ram to push the fuel bundle string. The FARE device is essentially a How restricting element that produces enough drag force to push the fuel bundle string toward downstream F/M. Channels that require the use of FARE device for refuelling are located along the outside perimeter of reactor. This paper presents the FARE device design feature, steady state hydraulic and operational characteristics and behavior of the device when coupled with fuel bundle string during fuelling operation. The study showed that the steady state performance of FARE device meets the design objective that was confirmed by downstream F/M C-ram force to be positive.

• Resources Recycling
• /
• v.13 no.6
• /
• pp.37-42
• /
• 2004

The power loss analysis was carried out for Ni-Cu-Zn ferrite sample with different content of NiO and ZnO. The power loss, Pcv decreases monotonically with increasing temperature and attains to a certain value at around 100~120 degrees Celsius. The frequency dependence of Pcv can be explained by Pcv~f$^n$, and n is independent of the frequency, f up to 1 MHz. The Pcv decreases with an increase in ZnO/NiO. The Pcv was separated to hysteresis loss(Ph) and residual loss(Pcv-Ph). The temperature characteristics and compositional dependence of Pcv can be attributed to the Ph, while Pcv-Ph is not affected by both temperature and ZnO/NiO. By analyzing temperature and composition dependence of Ph and initial permeability, ${\mu}_i$ like following equations could be formularized. ${\mu}_i{\mu}_0=I_s^2/(K_I+b{\sigma}_0{\lambda}_s)$ Wh=13.5(I$_s^2/{\mu}_i{\mu}_0)$ Where ${\mu}_0$ is permeability of vacuum, I$_s$ is saturation magnetization, K$_I$ is anisotropy constant, $s_0$ is internal heterogeneous stress, ${\lambda}_s$ is magnetostriction constant, b is unknown constant, and Wh is hysteresis loss per one cycle of excitation (Ph=Wh${\times}$f). Steinmetz constant of Ni-Cu-Zn ferrite, m=1.64~2.2 is smaller than that of Mn-Zn ferrites, which suggests the difference of loss mechanisms between these materials.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.3
• /
• pp.186-191
• /
• 2010

Four unrecorded species (Barbella flagellifera, Isothecium hakkodense, Mnium orientale and Fissidens gardneri) and with one unrecorded genus, Barbella, are reported new to the Korean moss flora. B. flagellifera (Meteoriaceae) was found on a tree at alt. 300-350 m of parasitic Seogeomun-oreum Volcano on Jeju Island. The species are mainly distributed in subtropic regions. I. hakkodense (Lembophyllaceae) was found around the top of Seongin-bong on Ulleung Island. This species is similar to I. subdiversiforme, however, it can be distinguished by the morphologies of branch leaves and alar cells. M. orientale (Mniaceae) was collected from Mt. Jiri. This is similar to M. heterophyllum, however, it can be distinguished by plant size, number of teeth in leaf margin and cell size on leaf. F. gardneri (Fissidentaceae) was found along the valley of Mt. Palyeong, Jeollanam Province. This species is similar to F. obscurirete, but distinguished by the size of the plants and their leaves as well as the costal lengths of the leaves.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.229-244
• /
• 2005

In this paper, we study the third order ordinary differential equation : $$x'(t)=f(t,x(t),x'(t),x'(t)),t{\in}(0,1)$$ subject to the boundary value conditions: $$x'(0)=x'(\xi),x'(1)=^{m-3}{\Sigma}_{i=1}{{\beta}x'({\eta}i),x'(1)=0}$$. Here ${\beta}_{i}{\in}R,\;^{m-3}{\Sigma}_{i=1}\;{\beta}_{i}\;=\;1,\;0<{\eta}_1<{\eta}_2<{\cdots}<{\eta}_{m-3}<1,\;0<\xi<1$. This is the case dimKer L = 2. When the ${\beta}_i$ have different signs, we prove some existence results for the m-point boundary value problem at resonance by use of the coincidence degree theory of Mawhin [12, 13]. Since all the existence results obtained in previous papers are for the case dimKerL = 1, our work is new.

• Bulletin of the Korean Mathematical Society
• /
• v.40 no.2
• /
• pp.327-340
• /
• 2003

We are devoted to dealing with the conformal theory of a Rizza manifold with a generalized Finsler metric $G_{ij}$ (x,y) and a new conformal invariant non-linear connection $M^{i}$ $_{j}$ (x,y) constructed from the generalized Cern's non-linear connection $N^{i}$ $_{j}$ (x,y) and almost complex structure $f^{i}$ $_{j}$ (x). First, we find a conformal invariant connection ( $M_{j}$ $^{i}$ $_{k}$ , $M^{i}$ $_{j}$ , $C_{j}$ $^{i}$ $_{k}$ ) and conformal invariant tensors. Next, the nearly Kaehlerian (G, M)-structures under conformal change in a Rizza manifold are investigate.