• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.28-32
• /
• 1989

최근에 건설된 여러 토목구조물에서 평행사변형 모양으로 이루어진 구조 요소들이 점차 생겨나고있다. 특히 미국의 일부 I-75 고속도로에서 쓰여진 평행사변형 모양의 슬라브구조나 지형학적 또는 구조역학적인 이유로 인한 고량의 평행사변형 모양 슬라브는 하중의 편심재하로 인한 구조역학의 정확한 해석의 필요성을 야기시켰다. 이에 본 연구는 유한요소법에 의한 평행사변형 요소의 강성매트릭스와 하중매트릭스를 유도하여 평행사변 유한요소를 해석할수있는 구조해석용 서브루틴 프로그램(Subroutine Program)을 만들고 특히 경사 죠인트를 가진 도로구조 해석용 쇼프트웨어(Software)를 만드는데 목적이있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.207-212
• /
• 2001

Electro-Rheological(ER) fluid are suspensions which show an abrupt increase in rheological properties under electric fields. ER effects arise from electrostatic forces between the starch particles dispersed in the electrically insulating silicone oil, induced when an electric field is applied. Yield stress of the fluids were measured on the couette cell type rheometer as a function of electric fields. This paper presents performance analyses of four types of the two parallel-plate. Which have different electrode length and width but same electrode area. On the basis of the pressure drop and flow rate analysis. Four types of the two parallel-plate are designed and manufactured. Using ER fluid, it is possible to directly interface between electric signals and fluid power without moving parts.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.274-278
• /
• 2015

There are different kinds of aircrafts, such as conventional airplane, rotorcraft, fighter, and unmanned aerial vehicle. Their shape and feature are dependent upon their assigned mission. One of the fundamental analyses during the design of the aircraft is the structural analysis. The structural analysis becomes more complicated and needs more computations because of the on-going complex aircrafts' structure. In order for efficiency in the structural analysis, a simplified approach, such as equivalent beam or plate model, is preferred. However, it is not clear which analysis will be appropriate to analyze the realistic configuration, i.e., an equivalent beam or plate analysis for an aircraft wing. It is necessary to assess the boundary between the one-dimensional beam analysis and the two-dimensional plate theory for an accurate structural analysis. Thus, in this paper, the static structural analysis results obtained by EDISON solvers were compared with the three-dimesional results obtained from MSC NASTRAN. Before that, EDISON program was verified by comparing the results with those from MSC NASTRAN program and analytic solution.

• 한국지진공학회논문집
• /
• 제20권6호
• /
• pp.369-378
• /
• 2016

The design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. The horizontal spectrum is defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement.

• 한국가시화정보학회지
• /
• 제12권1호
• /
• pp.30-34
• /
• 2014

Bluff bodies under the external periodic force vibrate at their own natural or forced frequency. Rectangular bodies or similar structures such as high-rise towers and apartments, and recently a well-cited application - offshore floating bodies, usually needs to reduce these vibrations for stability and the mode control. Therefore, this study is aiming to reduce or control the vibration of a structure by a passive control method, i.e., TLCD (Tuned Liquid Column Damper). Controlling a moving body with a TLCD based on a variety of the orifice shape has been preliminary studied. In order to get a proper control, an optimized study is made on the design of the orifice shape, which has internal plates with the holes. The results show the force acting on the body due to the periodic movement highly depends on the number of holes on the plate and the height of the water level. Therefore, the optimum shape of the orifice and the height of the water level should be confirmed by a series of experiments.

• 소성∙가공
• /
• 제20권4호
• /
• pp.273-278
• /
• 2011

Employing the TRIZ problem solving technique, a hybrid-type center plate for the molten carbonate fuel cell(MCFC) was developed for the purpose of improving gas sealing and maintenance. The manufacturing method of the hybrid-type center plate was divided into a trimming operation and a two-step bending process. In the latter, a modified punch shape was used to reduce springback. Using finite element(FE) simulations, bending stresses in the thickness and the in-plane directions were computed and the bending conditions were optimized. The optimized results of the two-step bending process were used as a basis for the design of the trimming process of the hybrid-type center plate. Finally, the external manifold-type center plate and the hybrid-type center plate were fabricated using a die set that accounts for the optimized conditions. It was found that the numerical simulation results were in good agreement with the experiments.

• 한국전자파학회논문지
• /
• 제25권7호
• /
• pp.767-773
• /
• 2014

본 논문에서는 무한 도체 평판의 슬릿 부근에 도체판을 부가하여 슬릿으로 침투하는 전자파의 저감 특성을 검토하였다. 이론 해석에는 FDTD 법을 사용하였으며, 부가 도체판의 형상 및 길이, 간격, 두께의 변화에 따른 침투 전계의 특성을 계산하여 부가 도체판의 구조 변화가 침투 전자파의 저감 특성 및 차폐 효과 특성에 미치는 영향을 고찰하였다. 그 결과, 부가 도체판의 구조 변화에 따라 차폐 효과, 침투 전계의 특성이 변화하는 것을 관찰할 수 있었고, 침투 전계를 최소로 하는 부가 도체판의 최적 구조가 있음을 확인할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.260-265
• /
• 2002

In micro hole punching process, it is very difficult to align punch with die hole. Misalignment can cause a falling-on in hole quality and breakage of punch and die. Micro punching using soft die plate without a die hole has a big advantage because it is not necessary to align punch with die hole and to consider die clearance. Soft die plates are made by polymers or hard rubbers which are softer than metals. In this study, several micro punching experiments are conducted. Micro punching test with some materials shows that micro hole punching is feasible with some soft die plates. Through the section shape obtained by mounting and polishing, the punched hole quality is measured and the shapes of burr and dome we studied.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.150-156
• /
• 1997

Three dimensional finite element analysis was conducted to estimate the effect of shape parameters (plate width and thickness) on the stress intensity factor for crack in the integrally stiffened plate. Analysis was done for width ratios of 0.5, 0.75, 1.0, 1.5, 2.0, 2.5, and thickness ratios of 2, 3, 4, 6. Based on these results, an empirical equation of geometry factor is formulated as a function of crack length and thickness ratio.

• Journal of Species Research
• /
• 제4권1호
• /
• pp.49-56
• /
• 2015

Zeuzera is one of the most important wood borer pests in South East Asia. Like of most other genera of moths, the systematic of this genus is still in dispute, especially on the monophyly and the relationship within this genus due to the fact that genus is very varied. This genus was defined based on external characters only such as cross vein Sc-Rs present, humeral plate approximately triangular in shape and anal plate moderately long to moderately short. Therefore, the monophyly of this genus need to be evaluated based on more comprehensive data. To clarify the monophyly of the genus Zeuzera, to reveal the phylogenetic relationships among the Indonesian species, and to establish the genetic characters of Indonesian Zeuzera, we analyzed seven species of Indonesian Zeuzera including three other species distributed around the world based on nucleotide sequence variation across a 580-bp region in the CO I gene. The results showed that the monophyly of Zeuzera was supported by bootstrap tests at the MP and ML tree building methods (>95%). Genus Zeuzera was divided into two groups (A and B) with Z. borneana was excluded from the two groups and occupied at the basal node. Indonesian species was distributed into two different clades. CO I gene alone was able to fully resolve the relationships among species within clade B. However, further investigations were needed by including more species and other genes that the more conserved to test the validity of the phylogenetic hypothesis proposed here.