• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.7-11
• /
• 2010

Various transmission technologies have been developed to satisfy environmental issues recently. Especially, the technology of the proportional control solenoid valve (PCSV) to ensure high level performance by electronic control has been studied. This study builds an analysis process for designing of the PCSV and characteristic predictions.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.326-334
• /
• 2008

This paper proposes a method for generating a basis translation matrix between isomorphic extension fields. To generate a basis translation matrix, we need the equality correspondence of a basis between the isomorphic extension fields. Consider an extension field $F_{p^m}$ where p is characteristic. As a brute force method, when $p^m$ is small, we can check the equality correspondence by using the minimal polynomial of a basis element; however, when $p^m$ is large, it becomes too difficult. The proposed methods are based on the fact that Type I and Type II optimal normal bases (ONBs) can be easily identified in each isomorphic extension field. The proposed methods efficiently use Type I and Type II ONBs and can generate a pair of basis translation matrices within 15 ms on Pentium 4 (3.6 GHz) when $mlog_2p$ = 160.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.45-57
• /
• 2016

This study was focused on the northernmost limit of the distribution changing of Daphniphyllum macropodum and studied characteristic of plant communities of natural monument No. 91 in Najangsan national park, Korea. The results of this study were as follows : 1. The highest importance percentage(I.P.) value at tree layer in Quercus. mongolica community was Q. mongolica, 37.8%. But the highest value of mean importance percentage(M.I.P.) was D. macropodum, 32.8%. 2. The highest I.P. value at tree layer in Carpinus laxiflora community was C. laxiflora, 47.4%. The highest M.I.P. value was C. laxiflora, 28.8% and M.I.P. value of D. macropodum was 24.0%. 3. The highest I.P. value at tree layer in D. macropodum community was D. macropodum, 55.6%. C. laxiflora and Q. mogolica I.P. value was 14.8% and 6.8%, respectively. The highest M.I.P. value was D. macropodum, 47.9%. Sapium japonicum and C. laxiflora M.I.P. value was 11.4% and 10.7%, respectively. 4. The highest I.P. value at tree layer in Quercus variabilis community was C. laxiflora, 20.8%. Q. variabilis and Acer pseudosieboldianum I.P. value was 15.3% and 12.5%, respectively. The highest M.I.P. value was D. macropodum, 21.5%. It needs to the continuous monitoring of vegetation and importance percentage change in tree layer and subtree layer of D. macropodum. The researching results of D. macropodum distribution, the distribution range of D. macropodum showed expanded more than range of Lim and Oh' result(1999). In other words, it was distributed low density level between Najangsa temple and Byeokryeonam, and distributed in upper Keumsun waterfall and Wonjeok upper valley. D. macropodum was appeared on hiking trails around from Wonjeokam to Bulchulbong. Especially, it was found in this study that D. macropodum was distributed on Seoraebong's north which placed outside area of Naejangsa region. In this study, it was considered that distribution range of D. macropodum was expanded. Also, it is expected to be used as a result of the field study of changing distribution study of broad leaved evergreen forest due to global warming.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.737-738
• /
• 2012

• Journal of the Korean Mathematical Society
• /
• v.33 no.2
• /
• pp.387-397
• /
• 1996

Let G be a finite group and F be a field of characteristic $p \geq 0$. Let $\Gamma = F^f G$ be a twisted group algebra corresponding to a 2-cocycle $f \in Z^2(G,F^*), where F^* = F - {0}$ is the multiplicative subgroup of F.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2001.07a
• /
• pp.55-55
• /
• 2001

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.91-100
• /
• 2000

An operating principle of PID module was implemented using the load, where the integer in a PID measuring derivate equation were valid in the ranges of 500-9000, 60-1000, and 000-9000, for P, I and D, respectively. A load operation program was designed to investigate the PID theory and its realization process. With it, it was examined the process that the current PV tracts the target SV, By investigating the time when the PV approaches the SV and the rate at which the EV is varied, it is revealed that 1) larger (or Smaller) Kp leads to faster (or slower) approaching of PV to SV, 2) smaller (or larger) Ti results in faster (or slower) approaching of PV to SV, 3) larger (or smaller)$T_d$ causes smaller (or Larger) rate variation in the EV. These observation were found to coincide with those of PID operating characteristics. Though this implementation, it is known for the widespread use of PID module that an improvement should be made in the error of temperature. This, meanwhile, implies that the computational time of conventional manipulation valve must be faster than 0.1 second. It is demanded that an improved PID module including the A/D and D/A module, in itself must be used in conjunction with PLC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.220-227
• /
• 2004

Phosphorus desorption study is essential to understanding P behavior in agricultural and environmental soils because phosphorus is considered as two different aspects, a plant nutrient versus an environmental contaminant. This study was conducted to determine soil P buffering power related to P desorption quantity intensity (Q/I) parameters, $Q_{max}$(an index of P release capacity) and $l_0$(an index of the intensity factor), and to investigate the characteristics of relationship between the P desorption Q/I parameters and the soil properties. Soil samples were prepared with treatments of 0 and $100mg\;P\;kg^{-1}$ applied as $KH_2PO_4$ solution. The P desorption Q/I curves were obtained by a procedure using anion exchange resin beads and described by an empirical equation ($Q=aI^{-1}+bln(I+1)+c$). The P desorption Q/I curves for the high available P (${\g}20mg\;kg^{-1}$ of Olsen P) soils were characteristic concave trends with or without soil P enrichment, whereas for the low available P (${\lt}20mg\;kg^{-1}$ of Olsen P) soils, the anticipated Q/I concave curves could not be obtained without a proper amount of P addition. When the soils were enriched in phosphates, the values of desorbed solid phase labile P and solution P, such as $Q_{max}$ and $I_0$ respectively, were increased, but the ratio of $Q_{max}$ versus $I_0$ was decreased. Thus, the slope of desorption Q/I curve represented as phosphorus buffering power, $|BP_0|$, is decreased. The $|BP_0|$ values of the high available P soils ranged between 48 and $61L\;kg^{-1}$ in the P untreated samples and between 18 and $44L\;kg^{-1}$ in the P enriched samples. Overall $|BP_0|$ values of both low and high available P soils treated with $l00mg\;P\;kg^{-1}$ ranged between 14 and $79L\;kg^{-1}$. The $Q_{max}$, values ranged between 71.4 and $173.1mg\;P\;kg^{-1}$, and the lo values ranged between 0.98 and $3.82mg\;P\;L^{-1}$ in the P enriched soils. The $Q_{max}$ and $I_0$ values that control the P buffering power may be not specifically related to a specific soil property, but those values were complicatedly related to soil pH, clay content, soil organic matter content, and lime. Also, phosphorus release activity, however, markedly depended on the desorbability of the applied P as well as the native labile P.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.126-129
• /
• 2001

A p-n junction was obtained by the deposition of an n-type ZnO thin film on a p-type Zn-doped InP substrate. The Zn-doped InP substrate has been made by the diffusion of Zn with sealed ampoule technique. The ZnO deposition process was performed by pulsed laser deposition (PLD). The p-n junction was formed and showed a typical I-V characteristic. We will also discuss about the realization of an ultraviolet light-emitting diode (LED). The structure of n-ZnO/p-Zn-doped InP could be a good candidate for the realization of an ultraviolet light-emitting diode or an ultraviolet laser diode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.126-129
• /
• 2001

A p-n junction was obtained by the deposition of an n-type ZnO thin film on a p-type Zn-doped InP substrate. The Zn-doped InP substrate has been made by the diffusion of Zn with sealed ampoule technique. The ZnO deposition process ws performed by pulsed laser deposition (PLD). The p-n junction was formed and showed a typical I-V characteristic. We will also discuss about the realization of an ultraviolet light-emitting diode (LED). The structure of n-ZnO/p-Zn-doped InP could be a good candidate for the realization of an ultraviolet light-emitting diode or an ultraviolet laser diode.