• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.1-8
• /
• 1991

용접구조물을 그의 사용목적에 적합하게 제작하려면 그의 구조설계와 사용재료의 적절한 선택과 사용성능을 충분히 확보하게 끔 제작과정과 품질보증을 할 수 있는 것이 필요하다. 즉 용접성 (Weldability)을 만족하게 하는 것이다. 구조물의 제작에 있어서 배려하여야 할 것은 구조의 사 용성능의 확보와 안전성인 것이다. 사용성능이란 구조의 강도, 기능 그리고 미관이나 끝내기의 외관적 성능등이다. 우리들의 생활공간에 존재하는 구조물이 한번 파손이나 파괴의 사고가 발 생하면 치명적인 것이 된다. 용접설계 생산과 제작의 기술적인 준비로써 용접구조물을 대상으로 용접가공에 중점을 두어 사용되는 말이다. 용접설계는 구조물과 제품의 용접제작과정을 완전히 지시하고 용접이음에 요구되는 사용성능이 확보 되게 끔 부재배치와 치수등이 선정되고 제작과 검사등의 실제 작업성을 충분하게 고려한 제작계획을 세우는 것을 말한다. 이와 같이 된 용접 설계를 바탕으로 용접기술자가 최적한 용접재료의 용접조건등을 결정한다. 즉 설계와 용접시공은 서로 밀접한 관계를 갖고 있어야 한다. 특히 용접설계의 비교적 초기단계에 속하는 것은 제품 기본계획과 강도해석 그리고 구조설계의 과정에 반드시 용접기술자의 관여가 필요한 것이다. 그리고 설계의 최적화를 위하여는 많은 정보 특히 경험적인 정보와 구조 해석적인 정보가 잘 처리되어야 한다. 오늘날의 CAD의 도입이란 전산기의 처리기술과 graphic기술을 묘미 있게 이 용한 것이라 할 수 있다. 용접구조물의 용접성을 논술하려면 다음과 같이 구분하는 것이 바람 직하다. 1. 용접구조물의 허용강도 2. 동접구조용의 강의 선택 3. 용접시공조건 4. 용접설계 이중 용접 제작과정을 표 1에 나타내었다. 구조물의 용접설계 요구조건으로써, 1)손상, 2)탄성 파손, 3)항복응력, 4)기계적인 불안정성, 5)파괴와 붕괴등을 고려하여야 하며 구조용 강의 선택은 1. 강도(strength) 2.연성(ductility) 3.인성(toughness)을 고려하여 구조물의 설계에 충분히 만 족해야 한다.

• Journal of ILASS-Korea
• /
• v.23 no.2
• /
• pp.58-65
• /
• 2018

An analytic strategy to control the variable valve actuation applied to two intake valves (flow port intake valve and swirl port intake valve) was performed in this study. we considered the variation in phasing of intake valve profiles by using the Cam-in-Cam technology. The analytic model was implemented in the GT-Power simulation program and analyzed the result of regulated emissions such as, NOx and Soot, especially with IMEP characteristics. Namely, we meticulously investigated the sources of having effect on the amount of NOx and soot formation under the test conditions with retard timing of both flow port and swirl port intake valves for decreasing the opening duration by 35CAD. Also, we analyzed the effect of incylinder pressure and temperature with NOx variations and in-cylinder pressure and temperature on NOx variations and normalized turbulent intensity. Through this analysis, some useful results on the combustion and flow characteristics of the swirl port and flow port control of the intake valve were obtained by this study.

• The Journal of Information Systems
• /
• v.8 no.1
• /
• pp.27-44
• /
• 1999

Case-Based Reasoning(CBR) offers a new approach for developing knowledge based systems. CBR has several research issues which can be divided into two categories : (1) static issues and (2) dynamic issues. The static issues are related to case representation scheme and case data model, that is, focus on casebase which is a repository of cases. The dynamic issues, on the other hand, are related to case retrieval procedure and problem solving process, i.e. case adaptation phase. This research is forcused on retrieval procedure Traditional query processing accepts precisely specified queries and only provides exact answers, thus requiring users to fully understand the problem domain and the casebase schema, but returning limited or even null information if the exact answer is not available. To remedy such a restriction, extending the classical notion of query answering to approximate query answering(AQA) has been explored. AQA can be achieved by neighborhood query answering or associative query answering. In this paper, neighborhood query answering technique is used for AQA. To reinforce the CBR process, a new retrieval procedure(cooperative CBR) using neighborhood query answering is proposed. An neighborhood query answering relaxes a query scope to enlarge the search range, or relaxes an answer scope to include additional information. Computer Aided Process Planning(CAPP) is selected as cooperative CBR application domain for test. CAPP is an essential key for achieving CIM. It is the bridge between CAD and CAM and translates the design information into manufacturing instructions. As a result of the test, it is approved that the problem solving ability of cooperative CBR is improved by relaxation technique.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.31-40
• /
• 2007

Reverse engineering of reliefs aims to turn an existing relief superimposed on an underlying surface into a geometric model which may be applied to a different base surface. Steps in this process include segmenting the relief from the background, and describing it as an offset height field relative to the underlying surface. We have previously considered relief segmentation using a geometric snake. Here, we show how to use this initial segmentation to estimate the background surface lying under the relief, which can be used (i) to refine the segmentation and (ii) to express the relief as an offset field. Our approach fits a B-spline surface patch to the measured background data surrounding the relief, while tension terms ensure this background surface smoothly continues underneath the relief where there are no measured background data points to fit. After making an initial estimate of relief offset height everywhere within the patch, we use a support vector machine to refine the segmentation. Tests demonstrate that this approach can accurately model the background surface where it underlies the relief, providing more accurate segmentation, as well as relief height field estimation. In particular, this approach provides significant improvements for relief concavities with narrow mouths and can segment reliefs with small internal holes.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.273-280
• /
• 2016

연구목적: 본 연구의 목적은 통상적으로 사용되는 글라스 세라믹과 고분자를 침투시킨 지르코니아 소재로 제작된 코어와 레진 시멘트의 굴곡강도 및 결합강도를 비교하여 하이브리드 기술이 치과 재료의 물리적인 성질에 미치는 영향을 조사하기 위함이다. 연구방법: 본 두 가지의 통상적으로 사용되는 세라믹소재[Vita PM9(GC) and I-JAM(ZC)] 와 다른 두 가지 하이브리드 세라믹 소재 [CELTRA Duo(ZRC) and Vita Enamic(RIZ)] 를 평가하였다. 각 그룹의 소재를 선택하여 결합강도와 굴곡강도, 그리고 scanning electron microscopy(SEM)을 이용하여 표면분석을 시행하였다. 도출된 결과 데이터는 일원분산분석(One-way ANOVA)을 통해 분석되었으며, 제1종 오류의 수준은 0.05로 하였다. 연구결과: RIZ 그룹에서 가장 높은 결합강도를 보였으며(p<0.05), ZC 그룹이 가장 낮은 결과를 보였다. 상대적으로 굴곡강도는 ZC 그룹이 가장 높은 수치를 나타내었으며, RIZ 그룹이 가장 취약했다. 연구결론: 하이브리드 기술로 제작된 소재(RIZ 그룹)는 우수한 레진 시멘트와의 결합강도를 보였지만, 그에 비해 굴곡강도는 상대적으로 통상적인 지르코니아 소재보다 비교적 취약한 결과를 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1796-1802
• /
• 2011

In this paper, the radio propagation path loss prediction simulator in tunnel was developed. It used a image theory method for analysing precise radio propagation path. And it can predict radio propagation path loss in straight and curved tunnels. The simulator can plot realtime radio propagation paths using various parameters which was input by user. And it can simulate from changing transmitter and receiver positions. The predicted path loss of simulator was compared with the measurements in Chunhyun tunnel and confirmed the validity.

• Journal of Fashion Business
• /
• v.27 no.4
• /
• pp.101-114
• /
• 2023

This study aimed to create globally acceptable Hanbok-inspired work uniforms, by developing practical designs and providing useful resources for incorporating Hanbok characteristics into office attire. First, to establish the elements that the Hanbok work uniform should have, the definition and characteristics of service clothes and preferences for the process of modernization of traditional Hanbok were reviewed through a review of the preceding studies. For the Hanbok work uniform design, a total of 4 pieces, 2 for each male and female, were planned, a schematic diagram was created, and the design was modified after evaluation by fashion design experts. I made a pattern of the modified design with a CAD program, imported it into CLO 3D to produce a virtual costume, and confirmed the final design draft. Work uniform design has symbolism, functionality, and aesthetics as its characteristics. The functionality of the Hanbok work uniform designed in this study is suitable for the season, and it was designed to increase the efficiency of work when worn for a long time. The design was focused on the development of materials and patterns in consideration of comfort and activity. The esthetic nature of hanbok-inspired work clothes was intended to reveal details that could highlight the silhouette of the human body and reflect the beauty of hanbok.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.645-652
• /
• 2024

Building Information Modeling (BIM) involves the integration of equipment information and component parameters across various engineering disciplines. The complex processes during model construction can lead to human errors. Furthermore, design changes often occur at various stages of the building's lifecycle, requiring designers and modelers to make timely modifications, resulting in significant costs and time consumption. Mechanical, electrical, and plumbing (MEP) design is considerably more complex than architectural design. Therefore, this study focuses on the automatic generation of a heating, ventilation, and air conditioning (HVAC) ductwork model with MEP design through BIM. Dynamo, a visual programming language (VPL), offers features such as arrangement, connectivity, and scalability. Thus, this research applied Dynamo to develop the Automatic Ductwork BIM Model Generation System. The BIM model generated by the system facilitates collaborative efforts and enables the analysis of HVAC System Conflicts. The system extracts coordinates for air handling units, supply air, and exhaust air outlets. The equipment is automatically positioned based on these coordinates, and the corresponding duct paths are generated by reading CAD files. At each duct connection point, appropriate fittings are fabricated according to specifications and dimensions. The duct system is configured with distinct colors, and the results are visualized in Revit, facilitating HVAC system clash detection in the future. This study undertakes a real project to validate the proposed system and processes and assesses its impact on modeling efficiency, real-time responsiveness, and accuracy, realizing automated ductwork generation.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.413-421
• /
• 2012

Purpose: The purpose of this study is to investigate the improvement measure of dental technician practical examination. Methods: A survey was performed on 111 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 12.0. The collected data was analyzed by frequency and chi-square test. Results: Questions most necessary work tools with the articulator was the highest with 55.9%, Electric wax carver(16.2%), heating clear(14.4%), CAD/CAM program(9.0%) was in the order. The need for additional practical test in response to actions included maxillary and mandibular comments occlusal work that you have to wax up the highest rate of 63.8%. Items most in need of improvement was strengthen of clinically oriented(48.0%), separation of written and practical(14.6%), control the degree of difficulty(11.4%) were the next order. Conclusion: Based on the results of this study, the current dental technician did not show major problems in the practical test. However, clinicians should be strengthened mainly. To do this, the use of the articulator is essential.