• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.2
• /
• pp.88-97
• /
• 2016

Aesthetics can be affected by the interest and the trend of the time. There are the limits of the equipment and materials required for the times, aesthetic case is also considered necessary to overcome them and will introduce the following case in accordance with the patients demands and circumstances. I hope the further development of CAD/CAM by taking over the things have done in the analogue by utilizing the latest technology that is thought to challenge the current limit itself is important. Digital has the advantages in various perspectives. Especially, I am very interested in as related to "digital communication." In particular, when utilizing the data using intra oral scanner can easily direct converse about prosthesis between the dentist and the dental technician through a software program Now, as the digital communication affects the integrity of the prosthesis directly, I had a expectation of a new era for the prosthetic and aesthetics. In this case report, I would like to introduce direct and real digital communication through the following 2 parts.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.325-328
• /
• 2003

Nine commercial soy sauces $(A{\sim}I)$ were investigated for their biogenic amine (BAs) levels. Detected biogenic amines were putrescine (PUT), cadaverine (CAD), trytamine (TRP), ${\beta}-phenylethylamine$ (PHE), spermine (SPM), histamne (HIS), and tyramine (TYR). All products tested had biogenic amines as detected level. PUT was the major biogenic amines detected in six products, and difference between the highest and the lowest among products was more than 16 mg/kg. Six products had all seven biogenic amines tested, while one product had only five. Results indicate that soy sauces commercially available in Korea contain biogenic amines at various levels. Studies related to biogenic amines including survey of contents must be performed continuously.

• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.51-58
• /
• 2005

Interpreting a natural line drawing as a solid object requires simplifying assumptions in order to make the problem more tractable. Unfortunately, some of the assumptions made in the past have overly simplified the problem. Restricting the valency of vertices, and in particular allowing only trihedral vertices, distorts the problem, since algorithms which are satisfactory for the simplified problem are not satisfactory in the general case. This paper presents a test set of drawings of objects with higher-valency vertices. The intention in creating this test set is that it may be used to determine how effective various algorithms are in dealing with general (i.e. unrestricted) valency vertices.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1095-1105
• /
• 1993

Shape rolling processes to produce H-section beams are numerically simulated by the simplified three-dimensional finite element method. The 2-dimensional finite element method, used for the generalized plane strain condition, is combined with the slab method. Computer simulation results of the 19-passes in H-section beam rolling in practice include the grid distortions, the cross-sectional area changes, the roll separating forces, and the roll torques. Also, the amount of side spread can be found during the multi-pass rolling simulations. The finite element mesh system is remeshed with I-DEAS whenever the billet distorts severely. This study would contribute to CAD/CAM of shape rolling process through the optimal roll pass schedule.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.91-97
• /
• 2005

Bones are dynamic structures, being supported by muscles, tendons, and ligaments. When some or all the structures are disturbed i.e. in fractures, the alignment of the bone in respect to the rest of the body is deranged. This gives rise to axial as well as rotational deformity in three dimensional planes. The correct alignment and position of the long bones are to be maintained to heal the bone in the best possible anatomical and functional position. The objective of this research is to address the problems in the current practice involving surgeon, assistant, fluoroscopy and crude mechanical means and to see if a robotic solution exists to solve the problems of manipulating and reducing long bone fractures. This paper presents various design aspects of the proposed surgeon-instructed, image-guided and robotic system including the system design specification, robot design and analysis, motion control and implementation, and x-ray image processing and incorporation in CAD environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.1165-1168
• /
• 1995

This paper describes the evaluation of a robot based filament winding cell consisting of an industrial robot (ASEA IRB 6/2) and an in-house fabricated mandrel drive mechanism, both being coordinated by a personal computer. As in many manufacturing processes, tradeoffs exist between accuracy and speed. The accuracy versus speed relationships of the robotic winding cell were experimentally determined for discrete, fine and medium movement modes while traversing a segmented delivery eye path for a cylindrical mandrel in three configurations (in-line, offset and angled with respect to the axis of rotation). the results show that the robot winding cell is appropriate for very accurate winding of fibre strands if the mandrel axis is concentric with the mandrel drive axis and the discrete mode(i.e. low speed) of the robot is used.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.71-77
• /
• 1996

This paper describes the development of on the machine measuring(OMM) system which can directlry measure the three dimensional machined dimensilnal accuracy using scanning probe in milling machine. Two algolithms, continuous path(CP) measurement using UC program and CAD data assisted point to point(PTP) measurement, were developed regarding specification of scanning probe. The OMM system was contructed to verify the developed system suing the proposed algorithm, and actually measured three kinds of machined TV shadow mask molds. The developed system was evaluated it's repeatability and compared with the current measurement system of CMM(Coording Measuring Machine) in terms of relative accuracy and time reduction and productivity increase.

• Archives of design research
• /
• v.16 no.2
• /
• pp.87-98
• /
• 2003

It was developed exporting jewelry products so that export those goods by industrial-educational corporation. I concluded an agreement with Hyun-dai co. Ltd, known as a specialist of the cultural goods producing company. By differentiation of the designs for expressing cultural images of korea, we tried to make competitive goods so that it can give value-added profits to the company. And we tried to settle specialization, securing specialty, outsourcing and utilize the spearheaded instrument Jewel CAD, R/P System. Also we tried to contribute to achieve the aims that cost down, task cooperating, systematization by reporting those things to the jewelry business world.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.436-440
• /
• 2006

A rapid tooling (RT) method fur the resin transfer molding (RTM) have been investigated. We fabricated a curved I-beam to verify the method. After creating a three-dimensional CAD model of the beam we fabricated a prototype of the model using a rapid prototyping (RP) machine. A soft mold was made using the prototype by the conventional silicone mold technique. The procedure and method of mold fabrication is described. The mold was cut into several parts to allow easier placement of the fiber preform. We conducted the resin transfer molding process and manufactured a composite beam with the mold. The preform was built by stacking up eight layers of delicately cut carbon fabrics. The fabrics were properly stitched to maintain the shape while placement. The manufactured composites beam was inspected and found well-impregnated. The fiber volume ratio of the fabricated beam was 16.85%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.8
• /
• pp.1201-1210
• /
• 1990

This paper proposes on-chip instruction and data cache memories on RISC reduced instruction set computer) architecture which supports fast instruction fetch and data read/write, and enables RISC processor under research to obtain high performance. In the execution of HLL(high level language) programs, heavily used local scalar variables are stored in large register file, but arrays, structures, and global scalar variables are difficult for compiler to allocate registers. These problems can be solved by on-chip Instruction/Data cache. And each cycle of instruction fetch, pad delay causes the lowering of the processors's performance. Cache memories are designed in CMOS technology and SRAM(static-RAM), that saves layout area and power dissipation, is used for instruction and data storage. To speed up and support RISC processor's piplined architecture efficiently, hardwired logic technology is used overall circuits i cache blocks. The schematic capture and timing simulation of proposed cache memorises are performed on Apollo DN4000 workstation using Mentor Graphics CAD tools.