• Animal Bioscience
• /
• 제34권2호
• /
• pp.295-305
• /
• 2021

Objective: The objectives of this study were to compare the effects of normal and low protein content (PC) of starter diet supplemented or not with blends of branched-chain amino acids (BCAAs) on growth performance of broilers under summer conditions and to investigate whether these effects altered some quality traits and the characteristics of gastrointestinal tract. Methods: A total of 768 mixed-sex broiler chicks (Ross 308, one-d-old) with an average initial body weight (BW) of 47.6±1.03 g were allocated into six treatments with four replications in 2×3 factorial arrangement. Factors were: PC, normal (N, 22% to d 15); and low (L, 20% to d 15); and added BCAA blends, L-leucine, L-isoleucine, and L-valine at zero (0L:0I:0V); 1.0, 0.25, and 0.25 (4L:1I:1V); or 1.0, 0.25, 0.75 (4L:1I:3V) g/kg of diet. Hence, six dietary treatments were named as N0L:0I:0V, N4L:1I:1V, N4L:1I:3V, L0L:0I:0V, L4L:1I:1V, and L4L:1I:3V. Average indoor temperature and humidity were 32.8℃±1.7℃ and 61.1%±4.12%, respectively. Results: BW, feed conversion ratio (FCR) and carcass weight were not affected by PC, BCCA and their interaction (p>0.05). The L diets decreased the water holding capacity of the breast (p = 0.002) and thigh (p = 0.050) meats and dressing percentage (p = 0.005) compared to the N diets. The 4L:1I:1V diet decreased breast yield compared to the 0L:0I:0V diets (p = 0.041). The effect of PC on feed intake, mortality and gastrointestinal trait weight were depended on the L:I:V ratios under summer conditions due to interactions between factors (p<0.05). The FI and mortality of L4L:1I:1V broilers were lower than those of N4L:1I:1V birds (p<0.05). Conclusion: It was concluded that the blends of BCAAs used failed to improve performance and to promote breast yields, because diets with normal or with reduced protein supplemented or not with BCAAs up to d 15 produced a similar BW and FCR in broilers raised in hot-climate conditions.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1996년도 추계 학술대회지
• /
• pp.104-105
• /
• 1996

• Earthquakes and Structures
• /
• 제24권6호
• /
• pp.455-475
• /
• 2023

The present study investigates the non-linear soil-pile interaction using three-dimensional (3D) non-linear finite element models. The numerical models were validated by using the results of extensive pile load and shaking table tests. The pile performance in liquefiable and non-liquefiable soil has been studied by analyzing the liquefaction ratio, pile lateral displacement (LD), pile bending moment (BM), and frictional resistance (FR) results. The pile models have been developed for the different ground conditions. The study reveals that the results obtained during the pile load test and shaking cycles have good agreement with the predicted pile and soil response. The soil density, peak ground acceleration (PGA), slenderness ratio (L/D), and soil condition (i.e., dry and saturated) are considered during modeling. Four ground motions are used for the non-linear time history analyses. Consequently, design charts are proposed depended on the analysis results to be used for design practice. Eleven models have been used to validate the capability of these charts to capture the soil-pile response under different seismic intensities. The results of the present study demonstrate that L/D ratio slightly affects the lateral displacement when compared with other parameters. Also, it has been observed that the increasing in PGA and decreasing L/D decreases the excess pore water pressure ratio; i.e., increasing PGA from 0.1 g to 0.82 g of loose sand model, decrease the liquefaction ratio by about 50%, and increasing L/D from 15 to 75 of the similar models (under Kobe earthquake), increase this ratio by about 30%. This study reveals that the lateral displacement increases nonlinearly under both dry and saturated conditions as the PGA increases. Similarly, it is observed that the BM increases under both dry and saturated states as the L/D ratio increases. Regarding the acceleration histories, the pile BM was reduced by reducing the acceleration intensity. Hence, the pile BM decreased to about 31% when the applied ground motion switched from Kobe (PGA=0.82 g) to Ali Algharbi (PGA=0.10 g). This study reveals that the soil conditions affect the relationship pattern between the FR and the PGA. Also, this research could be helpful in understanding the threat of earthquakes in different ground characteristics.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.503-506
• /
• 2003

The photovoltaic generators have a nonlinear V-I characteristics and maximum power points which vary with the illumination levels and temperatures. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV systems to the load. A novel MPPT control for photovoltaic system is proposed. The system input parameters are (dP, dI, and last incremental of duty ratio $L\deltaD$)and the output is the new incremental value (new ${\deltaD}$) according to the maximum power point under various illumination levels. Using fuzzy logic controller allows extracting the maximum power rapidly and without significant oscillations. Also FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve control system.

• 대한핵의학회지
• /
• 제15권2호
• /
• pp.43-51
• /
• 1981

In an attempt to evaluate the diagnostic significance of the serum thyroxine binding globulin (TBG) in various thyroid disease states, the authors measured serum $T_3$ uptake, $T_3$, total $T_4\;free\;T_4$, TSH and TBG by radioimmunoassay technique, and calculated the free $T_4$ index$(FT_4I)$ and $T_4/TBG$ ratio in 10 cases of normal subjects, 11 cases of hypothyroidism, 62 cases of euthyroidism and 37 cases of hyperthyroidism. The data were analysed in the aspects of diagnostic significance in each thyroid disease state, and the results were as follows; 1. In 10 cases of normal subjects, serum TBG was $17.4\sim26.8{\mu}g/ml$, $FT_4I$ was $5.1\sim9.7$, and $T_4/TBG$ ratio was $21.9\sim49.9(Mean{\pm}S.D.)$. 2. In 62 cases of euthyroidism with diffuse and nodular goiter, $FT_4I$ was $7.26{\pm}1.82,\;T_4/TBG$ ratio was $31.47{\pm}10.42$, and there were no significant difference from those of normal subjects (p>0.5). 3. In 11 cases of hypothyroidism, the $FT_4I$ was $3.13{\pm}2.15,\;T_4/TBG$ ratio was $11.3{\pm}5.31$, significantly lower than normal controls (p<0.01). 4. In 37 cases of hyperthyroidism, the $FT_4I$ was $30.0{\pm}12.0,\;T_4/TBG$ ratio was $121.4{\pm}62.2$, significantly higher than normal controls (p<0.01). 5. There were significant correlations between the $FT_4I$ and $T_4/TBG$ ratio, total $T_4\;and\;T_4/TBG$ ratio, in each thyroid function states. 6. The $FT_4I$ showed 100% of diagnostic value in hyperthyroidism, 89.2% in euthyroidism, and 80% in hypothyroidism group. The $T_4/TBG$ ratio showed 100% of diagnostic value in hyperthyroidism and hypothyroidism, and 80.6% in euthyroidism group. The above results suggest that $T_4/TBG$ ratio and $FT_4I$ showed same diagnostic value in hyperthyroidism group, but $T_4/TBG$ showed higher diagnostic significance than $FT_4I$ in hypothyroidism.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.224-231
• /
• 2001

2.45 GHz 마이크로웨이브를 사용하는 전자회전공명 플라즈마를 이용하여 화학적 기상증착(electron cyclotron resonance plasma enhanced chemical vapor deposition; ECR-PECVD) 방법으로 ECR 마이크로웨이브 power, CH$_4$/H$_2$가스 혼합비와 유량, 증착시간, 그리고 기판 bias 전압 등을 변화시켜 가면서 수소가 함유된 비정질 탄소(a-C:H) 박막을 증착하였고, 증착시킨 박막의 특성을 AES(Auger electron spectroscopy), ERDA(elastic recoil detection analysis), FTIR(Fourier transform infrared) 및 Raman 측정 등으로 조사하였다. 증착시킨 a-C:H 박막은 탄소 및 수소원소들로만 구성되어 있음을 AES 측정으로 확인하였다. 그리고 FTIR 측정으로부터 a-C:H 박막은 대부분 sp$^3$결합을 하고 있고 일부는 sp$^2$결합을 하고 있음을 확인하였으며, CH$_4$/H$_2$가스 혼합비와 유량의 변화가 a-C:H 박막의 탄소와 수소의 결합구조에 큰 영향을 미치지 않았으며, 다만 증착시간이 증가할수록 탄소와 수소 원자들의 결합구조가 $CH_3$구조에서 CH$_2$나 CH 구조로 변하고 있음을 알았다. 또한 Raman 스펙트럼의 Gaussian curve fitting을 통하여 sp$^3$/sp$^2$의 결합수에 비례하는 D 및 G peak의 면적 강도비(I$_{D}$/l$_{G}$)는 기판 bias 전압을 증가시킬수록 증가하였으며, 경도도 역시 증가하였다.하였다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.78-82
• /
• 2011

Mono- and few-layer graphenes were grown on Ni thin films by rapid-thermal pulse chemical vapor deposition technique. In the growth steps, the exposure step for 60 s in $H_2$ (a flow rate of 10 sccm (standard cubic centimeters per minute)) atmosphere after graphene growth was specially established to improve the quality of the graphenes. The graphene films grown by exposure alone without $H_2$ showed an intensity ratio of $I_G/I_{2D}$ = 0.47, compared with a value of 0.38 in the films grown by exposure in H2 ambient. The quality of the graphenes can be improved by exposure for 60 s in $H_2$ ambient after the growth of the graphene films. The physical properties of the graphene films were investigated for the graphene films grown on various Ni film thicknesses and on 260-nm thick Ni films annealed at 500 and $700^{\circ}C$. The graphene films grown on 260-nm thick Ni films at $900^{\circ}C$ showed the lowest $I_G/I_{2D}$ ratio, resulting in the fewest layers. The graphene films grown on Ni films annealed at $700^{\circ}C$ for 2 h showed a decrease of the number of layers. The graphene films were dependent on the thickness and the grain size of the Ni films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1536-1538
• /
• 2002

Effects at thermal treatment on the structural and electrical properties at DLC films have been studied. The DLC films were deposited by using a modified FCVA system as a function at negative substrate bias voltage, deposition time, and nitrogen flow rate. The thermal treatment on DLC films could be achieved by performing the RTA process at $600^{\circ}C$, 2min. Structural investigation on the thermal treatment effect was evaluated by inspecting the Raman spectroscopy, XPS, AFM, and internal compressive stress. In addition, the electrical properties of DLC films were evaluated by using the high current source and Lab-View data acquisition system. As the result at RTA treatment, $sp^3/sp^2$ ratio and internal compressive stress of the DLC films were decreased tram 5% to 22% and from 1GPa to 3GPa, and the $I_D/I_G$ intensity ratios was increased from 0.19 to 0.35. It was also found that the variation of internal stress of DLC films strongly agree with the variation of $sp^3/sp^2$ fraction and $I_D/I_G$ intensity ratio.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권6호
• /
• pp.781-784
• /
• 2000

A study was conducted to examine the influence of maize (Zea mays) and cowpea (Vigna unguniculata) intercropping on fodder biomass production and silage characteristics. Maize fodder was cultivated alone and intercropped with cowpea at seed ratio of 85:15 and 70:30. Fodder was harvested at heading stage (at about 35% dry matter). The data indicated significant increase in biomass and crude protein production of maize intercropped with cowpea at seed ratio 70:30 followed by seed ratio 85:15 as compared to maize alone. However, no (p>0.05) difference was observed in TDN production among the three treatments. Four types of silages from, I) maize alone, II) maize and cowpea (85:15), III) maize and cowpea (70:30) and IV) maize supplemented with 2.5% urea were prepared. After 60 days of ensiling period, silage samples were analysed for proximate composition and fermentation characteristics. Crude protein and lactic acid values of silages I, II, III and IV were 8.52, 9.82, 14.90 and 13.96% and 9.00, 9.38, 10.86 and 7.43%; respectively. In situ dry matter digestibility was maximum in silage III followed by silages II, IV and I. The results suggested that intercropping of maize and cowpea at seed ratio 70:30 increased fodder production and produced quality silage.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.353-360
• /
• 1999

An investigation made of the variations of angle of bias on the top of the sleeve cap curve line and calculated easing contraction ratio by capheights(A ; a,h$\times$5,/6) B: A, H/4 +4cm C:A.H/3 D: A.H/ 4+3cm E:AH/4+2cm, F: A,H/4+1cm, G: A,H/4, H:A,H/6, I:A,H/8) and the efects of easing contraction on the cap curve lines of sleeve A, D, G by easing stitch density with the gathering foot: sewing condition-lockstitch industrial machine stitch density(N1.0 ; 38stitches/3cm N1.5: 26stitches/3cm, N2.0 ; 19stitches/3cm, N2.5 ; 14stitches/ 3cm) The results obtained were as follows; 1) The variations of the angle of bias on the top of the sleeve cap curve line by cap heights can be done according to the angle balance (front; $\alpha$-$\beta$ back ; $\alpha$'- $\beta$') between the angle (front ;$\alpha$, $\beta$, back ; $\alpha$'- $\beta$') of bias of the two base-lines. 2) The higher cap height the more higher the calculated easing contraction ratio. 3) The lower the stitch density the higher easing contraction ratio. 4) The effects of easing contraction was that sleeve G was more than sleeve A, D.