• 한국가금학회지
• /
• 제33권2호
• /
• pp.113-119
• /
• 2006

본 연구는 유기태 철과 효모철의 첨가가 육계의 생산성 및 체조성에 미치는 영향에 대하여 연구하였다. 공시동물은 Ross broiler 252수로 7처리 6반복 반복당 6수씩 사양시험을 실시하였다. 처리구는 1) 대조구, 2) YM03 0.1%, 3) YM03 1.0%, 4) YF04 0.1%, 5) YF04 1.0%, 6) 유기태 Fe 0.01% 및 7) 유기태 Fe 0.1%로 총 7처리로 나누어 실시하였다. 증체량은 대조구가 2,087 g으로 낮게 나타났으며, 유기태 Fe 0.01% 첨가구가 2.121 g으로 나타나 대조구보다 높은 경향을 보였으나 통계적인 유의차는 보이지 않았다(P>0.05). 사료섭취량은 대조구는 3,797 g으로 낮게 나타났으며, YM03 1.0% 첨가구가 3,827 g으로 높게 나타나 대조구보다 높은 경향을 보였으나 통계적인 유의차는 보이지 않았다(P>0.05). 도체 Fe 함량은 대조구가 30.51 mg/dL 로 낮게 나타났으며, YF04 0.1 % 첨가구가 41.58 mg/dL 로 높게 나타나 대조구보다 높은 경향을 보였으나 통계적인 유의차는 보이지 않았다(P>0.05). 육계에서 사료내 유기태 철 또는 효모철의 첨가는 도체내 철의 함량을 강화시키고 철분이 강화된 축산물 생산이 가능할 것으로 사료되나 사업화하기 위해서는 추후에 더욱 체계적인 연구가 요구된다.

• KSBB Journal
• /
• 제5권3호
• /
• pp.235-240
• /
• 1990

Pseudomonas elodea 에 의한 Gellan gum생산시 이에 관련된 기초자료를 얻기 위하여 회분식 및 연속식 발효를 하였다. 회분식 배양의 결과로부터 비성장 속도는 $0.16hr^-^1$이었으며 72시간 배양후의 점도는 4500cp, 생성물 농도 0.7g dry weught/100g broth, 및 생산성은 0.08g dry weight/1/hr이었다. 연속식 배양을 통하여 최적 탄소원과 질소원의 농도비(3.0mg-carbon/mg-nitrogen)를 결정하였으며 Gellan gum의 최대 생성속도는 희석율 $0.14hr^-^1$에서 0.6g dry weight/l/hr이었다. 이러한 조건에서 각종 metabolic paeameter값을 계산하였다. 또한 배양액의 유변학적 특성은 Casson equation에 잘 부합됨을 확인하였고, 배양액의 점도와 산소전달계수를 측정하여 고점도 배양시 산소전달의 장애현상을 조사하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권17호
• /
• pp.7389-7394
• /
• 2014

Background: Chemotherapy is one of the major means for control of malignancies, with cisplatin (CDDP) as one of the main agents, widely used for the treatment of various malignant solid tumors. However, prevention of hepatotoxicity from cisplatin is one of the urgent issues in cancer chemotherapy. In this study, we aimed to investigate the effects of pu-erh tea on hepatotoxicity through body weight and tissue antioxidant parameters like, liver coefficient, serum alanine aminotransferase (ALT), serum aspartate aminotransferase (AST), superoxide dismutase (SOD), glutathione peroxidase (GSH-PX), malondialdehyde(MDA) and glutathione (GSH) levels, and light microscopic evaluation by histological findings. Materials and Methods: The rats were randomly divided into five groups: Control (n=10), cisplatin (3 mg/kg p.i., n=10), cisplatin+pu-erh (0.32 g/kg/day i.g., n=10), cisplatin+pu-erh (0.8 g/kg/day i.g., n=10) and cisplatin+pu-erh (1.6 g/kg/day i.g., n=10). Pu-erh tea powder was administrated for 31 consecutive days. The rats were sacrificed at the end on the second day after a single dose of cisplatin treatment for measuring indices. Results: Pu-erh tea powder exhibited a protective effect by decreasing MDA and GSH and increasing the SOD and GSH-PX levels and GSH-PX/MDA ratio in camparison with the control group. Besides, pu-erh tea was also able to alleviate the pathological damage to some extent. Conclusion: Pu-erh tea powder is protective against cisplatin-induced liver oxidative damages, especially at the medium dosage (0.8 g/kg/d).

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.40-44
• /
• 1986

The cassegrain antenna, 32metor , diameter, is designed for the satellite earth station at Boun. It is fed by a beam waveguide of type. The results of measurements G/T (Gain to Noise Temperature ratio) is 40.86dB/K at the elevation elevation angle 5˚ for 4GHz. And the average transmit and receive gain are 64.62dB and 61.3dB, respectively. They satisfy the values designed for the antenna. The sidelobe levels of the pattern also are in good accord with the recommendation of C.C.I.R.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.69-72
• /
• 2003

The paper presents implementation of a PV fuzzy logic power tracking controller. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV system to the load. A new fuzzy MPPT is proposed, where fuzzy inputs parameters are dp/dI and the last incremental of duty of duty ratio $L{\delta}D$, and the output is the new incremental value $(new{\delta}D)$ according to the maximum power point under various illumination levels.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2828-2834
• /
• 2024

This research intends to recycle bone and incorporate it into concrete for radiation shielding application using Phy-X/PSD software. Cement, sand and granite were mixed in proportion of 0.5 kg:1 kg:1 kg to obtain sample A. Other concretes composing of cement, sand, granite and bone ash was in proportion 0.45 kg:1 kg:1 kg:0.05 kg, 0.1 kg:1 kg:1 kg:0.4 kg and 0.35 kg:1 kg:1 kg:0.15 kg to obtain samples B, C and D respectively. 0.5 water-to-cement (W/C) ratio was adopted throughout the mixes because the control mix contain the normal water quantity for normal hydration of cement. Replacing the bone ash for the cement in the fabricated concretes enhances their densities where the fabricated concretes' density decreased from 2.33 g/cm³ to 2.22 g/cm³ by raising the reinforcing bones fly ash concentration from 0 to 0.15 kg. Additionally, increasing the bones fly ash concentration within the fabricated concretes increases their linear attenuation coefficient (LAC) where the fabricated concretes' μ values at 0.662 MeV reach 0.181 cm^-1, 0.178 cm^-1, 0.174 cm^-1, and 0.171 cm^-1, respectively for concretes A, B, C, and D. The use of other local materials is recommended, as it improves waste management being the major aim of the sustainable development goal.

• Journal of Animal Science and Technology
• /
• 제61권1호
• /
• pp.10-17
• /
• 2019

The present study was undertaken to investigate the effects of the plane of nutrition (PN) for growing-finishing pigs on growth performance and meat quality in summer. One hundred and two barrows and 102 gilts weighing approximately 44 kg were placed on a high-, medium-, or low-plane grower diet (HPG, MPG, or LPG) with ME and lysine concentrations ranging from 3.33 to 3.40 Mcal/kg and 0.93% to 1.15%, respectively, for 29 days in 6 replicates (pens) in total. Pigs from each grower pen were divided into two finisher pens and provided with a high-plane finisher diet (HPF) containing 3.40 Mcal ME and 9.5 g lysine/kg and a low-plane finisher diet (LPF; 3.25 Mcal ME and 8 g lysine/kg), respectively, up to approximately 110 kg, and slaughtered. Growth performance of the pigs, including average daily gain (ADG), average daily feed intake (ADFI), and gain:feed ratio, was not influenced by the grower-phase PN during any of the grower phase, a 31-d finisher phase I, and ensuing phase II. However, both the ADG and gain:feed ratio were greater (p < 0.05) for the HPF group than for the LPF group during the finisher phase I (748 vs. 653 g with SEM = 13 g and 0.333 vs. 0.299 with SEM = 0.008, respectively). The ADG, but not gain:feed ratio, was greater for the HPF group vs. LPF during the finisher phase II (673 vs. 623 g with SEM = 15 g for ADG and 0.322 vs. 0.323 with SEM = 0.005 for the gain:feed ratio). The carcass backfat thickness (BFT) was greater for the LPF group vs. HPF within the pigs which had been placed on LPG during the grower phase, but not within the pigs from the HPG or MPG group. Physicochemical characteristics of the longissimus dorsi muscle (LM) and sensory quality attributes of fresh and cooked LM were not influenced by either the grower-phase or finisher-phase PN. In conclusion, high PN is necessary for finishing pigs during the hot season to minimize the reduced rate of weight gain and also to prevent the increase of BFT that could result from low PN.

• 소성∙가공
• /
• 제30권4호
• /
• pp.195-200
• /
• 2021

In this study, we investigated the dominant processing variables that would influence the microstructural development of AA6061 deformed by differential speed rolling (DSR) at ambient temperature. For this purpose, we carried out a series of DSR on the samples to investigate the effects of roll speed ratio, sample rotation, and number of operation under specific rotation. Among these, the condition with a height reduction of 75% at a speed ratio of 1:4 through rotation along rolling direction (RR) displayed the pronounced results of more homogenous matrix-structure and superior mechanical properties than the others tested in this study. This was mainly due to the cross shearing of macro-shear pattern in segment where dynamic recrystallization took place with ease throughout the sample. Thus, an average microhardness value of 101 Hv was obtained in the present sample deformed by 4-pass DSR with RR where macro cross-shearing was effectively applied.

• Journal of Magnetics
• /
• 제5권2호
• /
• pp.50-54
• /
• 2000

NiMn-pinned spin valve films consisting of a layered glass/NiFe/Co/Cu/Co/NiFe/NiMn/Ta stack were made by do magnetron sputtering. After deposition, the structure was annealed in a series of cycles each including three hours at $220^\circ C, 2\times10^{-6}$ Torr, in a field of 350 Oe, to create an ordered antiferromagnetic structure in the NiMn layer and produce a strong unidirectional pinning field in the pinned magnetic layer, Optimum spin valve properties were obtained after seven annealing cycles, or 21 hours at $220^\circ C$, and were : MR ratio 1%, exchange coupling field 620 Oe, and coercivity of pinned layer 250 Oe. The exchange coupling field remained constant up to an operating temperature of $175^\circ C$, and the blocking temperature was about $380^\circ C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1019-1021
• /
• 1999

In this paper, we describe the design and appliance of the preventive diagnostic expert system of gas in oil for power transformer. This expert system is developed to use expert system development tool; Element Expert (NEURON DATA Inc.) Analysis is developed by four diagnose methods. In first, the standard of KEPCO is applied. It classifies the state of transformer by four level: Normal, warning, abnormal and danger. And the others are gas pattern methods, IEC code method, and Dornen & Roger Ratio method and applied later. These latter methods analyse the cause of result. Inference engine was designed with Element Expert. In last, we operate the system with sample data and we can obtain the correctly inferred result for the state of transformer.