• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1274-1278
• /
• 2009

Fracture characteristics for plate and dome shapes of glass filled ceramics using shock tube were carried out. Glass filled ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role as separated membrane between combustion and external air, and needs the frangible characteristics that the particles of fractured glass filled ceramics should not affect the internal components of combustion. The objectives of this study are to evaluate the fracture pressures for various thicknesses and diameters of shock impact area. Also fracture phenomena of separated membrane using a shock tube compare with analytical method. The experimental apparatus consists of a driver, a driven section and a dump tank. The used material is glass filled ceramic made from Corning company. Specimens have the thickness of 3, 4.5 and 6mm. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 농촌계획
• /
• 제24권3호
• /
• pp.63-71
• /
• 2018

The comparison of demand and supply is needed for efficient ecosystem services planning. However, the gap between them cannot be analyzed as existing studies mainly dealt with only the supply of ecosystem services. This study compares the demand and supply of ecosystem services in Shiheung using environmental complaints and urban planning by semantic network analysis. As a result, 'air' and 'water' quality are magnified in demand, 'energy' and 'water' are crucial in supply. This result presents that citizen ask for the improvement of air quality in regulation services, although local government has plans for energy support in provisioning services. Periodic ecosystem services demand and supply monitoring will be the base of effective ecosystem services planning, which reduce insufficiency and surplus.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.259-264
• /
• 2002

인장계류된 원통형실린더의 동적 거동해석에 관한 일련의 연구수행 결과는 다음과 같다. 1) 실린더형 부유체의 중심점을 인장계류시킨 새로운 개념의 부유식 구조물의 동적거동특성을 파악하였다. 2) 규칙파에서도 부유체와 테더(tether), 입사파의 상호간섭으로 인한 운동특성을 해석하였다. 3) 비선형유체력(2w, 3w)으로 인한 비선형 운동 응답 특성을 분석하였다. 4) 테더강성(tether stiffness)의 결정에 있어서 부유체와의 상호간섭 효과 뿐만 아니라 고주파수 영역에서의 공진을 충분히 고려하여 결정해야 한다. 5) 구조물의 설계시 Surge mode에서는 장주기 표류운동을 발생시키므로 Set down 등의 현상을 고려해야 한다.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.23-30
• /
• 2012

비대칭 H형강이 콘크리트에 매립되어 화재에 노출되는 일반 합성보에 비하여 내화성능이 높은 슬림플로어 공법에 대한 화재거동특성을 분석하고, 이를 기반으로 내화성능을 향상시킬 수 있는 최적 단면형상 조건을 도출하고자 연구를 수행하였다. 단면형상은 휨 성능을 증진시킬 수 있는 웨브 보강과 화재에 직접 노출되는 하부플랜지의 보강 방안에 대하여 화재실험을 진행하였으며, 무 보강조건과 형상변화시에 발생하는 합성플로어의 처짐을 비교 분석하여 효과적인 단면형상 설계조건을 도출하고자 하였다. 실험결과 웨브 보강방안에 비해 하부플랜지 보강시 내화성능 향상효율이 더 높은 것으로 나타났으며, 이는 화재에 직접적으로 노출되는 하부플랜지 부분에 보강을 하는 것이 급격한 온도상승으로 인한 강도저하로 인해 발생하는 변형을 보다 효율적으로 제어하기 때문으로 판단된다.

• 산업공학
• /
• 제17권3호
• /
• pp.384-396
• /
• 2004

This paper is concerned with a six sigma green belt training program. Comparative studies of existing training programs for three major companies (Samsung Electronics Company, Hyundai Motor Company, and LG Chemical Ltd.) and two consulting firms (Korean Standards Association and Korea Management Association) are performed. Based on the comparative studies, a cyber green belt training program is developed. The training program, which is composed of 34 modules, follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). This cyber training program is serviced in the homepage http://ise.chonbuk.ac.kr/∼sixsigma. It has been utilized as one semester subject of "Six Sigma Quality Management" in the department of industrial engineering. The advantage and disadvantage of this cyber training program are also discussed.

• 대한세포병리학회지
• /
• 제15권2호
• /
• pp.120-125
• /
• 2004

Ewing's sarcoma (ES)/PNET is common in both axial and appendicular skeletons, but is extremely rare in the talus. Here, we report a case of ES/PNET of the left talus in a 29-year-old male patient diagnosed by fine needle aspiration cytology, and review the literature on similar cases. The cytological smears were composed of individually dispersed small round cells and occasional clusters of loosely cohesive cells. The tumor cells were fragile, frequently exhibiting naked nuclei. Two distinct types of cells were observed. The light (chief) cells displayed round or slightly oval nuclei with frequent indentations, generally inconspicuous nucleoli, and a thin rim of cytoplasm, which sometimes harbored small vacuoles. The dark cells were smaller, displaying scanty cytoplasm with dense hyperchromatic nuclei, intermixed with chief cells, and often manifesting as small molded groups. However, no significant nuclear pleomorphisms or mitoses were noted. Tumor cells in the ceil block revealed positive cytoplasmic glycogen, as determined by a PAS stain with diastase control, and also exhibited positive immunoreactivity for CD99.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.179-184
• /
• 2012

This study was performed to find out the measurement criteria of slip resistance from analysis of human gait and slips. Many kinds of slip resistance testers were developed based on mechanical friction testers. But, there are, as yet, no unambiguous slip resistance measurement methodologies and generally accepted safety criteria or safety thresholds for estimating slipping hazard exposures. Also, there are variety of measuring conditions between those testers. The measurement criteria should be tested within the range of human slipping conditions observed in biomechanical studies. It's results should clearly consider whether the devices reflect the human slipping conditions. In this study a dragsled type friction tester, which was constructed in accordance with ISO 15133 basically, was used. Test conditions were set in order to determine the range of measurement criteria. It is shown that drag velocity should be more than 1 m/s, acceleration be more than 10 $m/s^2$, contact time be less than 0.1sec, and contact pressure be within 350~400 kPa.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.103-106
• /
• 2009

Fracture characteristics of plate shape using shock tube for glass filled ceramics was carried out. Glass filled ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role separating solid and liquid fuel, and needs the frangible characteristics that the fracture of a part should not affect the internal components of combustion. The objectives of this study are to evaluate the fracture pressures for various thicknesses and diameters of shock impact area. Also fracture phenomena of separated membrane using a shock tube are observed. The experimental apparatus of shock tube consists of a driver, a driven section and a dump tank. The used material is glass filled ceramic made from Corning company. Specimens are used 3, 4.5 and 6mm thickness. Also diameters of shock wave area are chosen 70, 60 and 50 mm. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.981-983
• /
• 2003

Using the conventional standard CMOS logic process, the high voltage MOSFET to drive top emission OLEDs was fabricated for the silicon-based organic electroluminescent display. The drift region of the conventional high voltage MOSFET was implemented by the n-well of the logic process. The measurement result shows a good saturation characteristic up to 50 V without breakdown phenomena.

• 한국전문물리치료학회지
• /
• 제14권4호
• /
• pp.14-20
• /
• 2007

To improve abdominal muscles strengthening, double straight leg lowering (DSLL) has been widely used in physical therapy, fitness program, and athletic program. The purpose of this study was to investigate the effects of the lumbar stabilization maneuver with a pressure biofeedback unit on the muscle activity of rectus abdominis (RA), external oblique (EO), and internal oblique (IO) during DSLL. Fourteen healthy young men were recruited from university population. The electromyography (EMG) activity was recorded from the RA, EO, and IO of both sides. The normalized EMG activity was compared using a paired t-test. The study showed that EMG activity in the RA, EO, and IO was significantly higher during DSLL with lumbar stabilization (DSLL-LS) compared to performed DSLL (p<.05). These results suggest that DSLL-LS is recommended as an effective method for strengthening exercise for the abdominal muscles.