• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.4-12
• /
• 1982

1. 이 실험은 미국 Dept. of Navy의 위촉(委囑)을 받아 School of Forestry, Yale University에서 실시중인 열대산(熱帶産) 재목(材木)이 물리적(物理的) 기계적(機械的) 성질(性質) 연구계획(硏究計劃)의 일부(一部)로써 동대학(同大學) 목재공예연구실(木材工藝硏究室)에서 실시(實施)하였다. 2. 이 실험은 연구소에 장치(裝置)된 적은 실험설비를 이용(利用)하여 일정(一定)한 관계습도(關係濕度)(21%, 53%, 61% 그리고 83%등(等))를 조절하면서 各 관계습도(關係濕度) 밑에서 각(各) 시험편을 가질 수 있는 평형합수량(平衝含水量) equilibrium moisture content와 hysteresis loop 즉 relative humidity moisture content curve을 결정(決定)하기 위하여 실시하였다. 3. 이 실험을 통(通)하여 목적(目的)한 바 열대재(즉(卽) Ocotea, Tabebuia 그리고 Hymenaea)의 관계 습도에 따라 equilibrium moisture content와 이때에 일어나는 hysteresis loop를 알게 되었으며 각(各) 수종의 관계습도에 따른 equilibrium moisture content는 Table 4과 같으며 hysteresis loop 관계(關係)는 Fig. 2.3.4와 같다. 4. 이 실험을 통(通)하여서도 과거(過去) 모는 실험결과에서 보는 것과 같이 각(各) 수종에 따라 같은 관계습도에서 가질 수 있는 equilibrium moisture content에 상당(相當)한 차이(差異)를 볼 수 있었으며 그 차이(差異)는 관계습도가 높을수록 큰 경향(傾向)을 띠우고 따라서 hysteresis loop의 shape 에도 각기(各其) 그 고유(固有)한 특징(特徵)을 볼 수 있다. 5. 대기중(大氣中)에 있는 큰 재목(材木)이 가질 수 있는 평형함수량(乎衝含水量)(E M C) 은 Table 6와 같으며 이것 역시(亦是) 적은 시험편(試驗片)으로 시험(試驗)하여 얻은 결과(結果)와 같이 나무 종류(種類)에 따라 차이(差異)가 있고 그 차이(差異)는 관계습도(關係濕度)가 높으면 높을수록 크다는 것을 알게 되었다. 6. 재목(材木)의 생산지(生産地)가 다르면 즉 남방(南方) 열대지역(熱帶地方)에서 생산(生産)하는 것과 온대지방(溫帶地方)에서 생산(生産)되는 나무사이에는 나무 종류(種類)가 달라서 직접(直接) 비교(比較)는 안되나 나무 종류별(種類別)로 보면 역시(亦是) 이와같은 목재(木材)의 물리적(物理的) 성질(性質)에 확실(確實)히 차이(差異)가 있었다는 것을 알게 되었다.(참조(參照) Table 5) 7. 이 실험결과를 발표(發表)함에 있어 친(親)히 충고(忠告) 지도(指導)하여 주신 Wangaard와 Dickinson 양(兩) 교수님과 재과(材科) 주선(周旋)에 수고(受苦)를 아끼지 않고 전심(全心) 도와 주신 Mr. R. C. Claneh 씨(氏)등에게 충심(衷心)으로 감사(感謝)의 뜻을 표(表)하는 바이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.116-124
• /
• 2002

The bubble model by Keller and Prosperetti is adapted to solve the nonlinear oscillation of a gas bubble. This formulation leads to accurate results since it introduces the energy equation instead of the polytropic assumption for the bubble interior. The numerical method used in this study is stable enough to handle large amplitude of bubble oscillation. The numerical results show some interesting nonlinear phenomena fur the bubble oscillator. The excitation changes the natural frequency of the bubble and makes some harmonic resonances at $f/f_0=1/2, 1/3$ and so on. The natural frequency of a bubble oscillator decreases compared with the linear case result, which means that the nonlinear bubble oscillation system is a "softening"system. In addition, the frequency response curve jumps up or down at a certain frequency. It is also found that there exist multi-valued regions in the frequency response curve depending on the initial conditions of bubble. The dependency of the bubble motion on the initial condition can generate extremely large pressure and temperature which might be the cause of the acoustic cavitation and the sonoluminescence.inescence.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.504-507
• /
• 2002

We investigated electro-optic and ionic properties of twisted nematic cells by using control of chiral pitch. These properties are observed in practical experiment and simulations. C-V and V-T curve characteristics were obtained from three types of cells with d/p. It is shown that d/p ratio of short cells exhibit faster response time improved by 20% than normal cell. Also, inter-gray response time is improved each rise time and decay time. And, the increase of saturation voltage is happened because of the small twist angel change from initial state at high voltage near 5V. To compensate for longer black level tail, gamma curve index was varied from g = 2.2 to g = 2.7 in module status. Additionally, adding chiral dopant into TN cells improved ionic characteristics such as increasing VHR, Ion density and DC Hysteresis were decreased..

• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.753-762
• /
• 2012

The ratcheting characteristics of cylindrical shell under cyclic axial loading are investigated. The specimens are subjected to stress-controlled cycling with non-zero mean stress, which causes the accumulation of plastic strain or ratcheting behavior in continuous cycles. Also, cylindrical shell shows softening behavior under symmetric axial strain-controlled loading and due to the localized buckling, which occurs in the compressive stress-strain curve of the shell; it has more residual plastic strain in comparison to the tensile stress-strain hysteresis curve. The numerical analysis was carried out by ABAQUS software using hardening models. The nonlinear isotropic/kinematic hardening model accurately simulates the ratcheting behavior of shell. Although hardening models are incapable of simulating the softening behavior of the shell, this model analyzes the softening behavior well. Moreover, the model calculates the residual plastic strain close to the experimental data. Experimental tests were performed using an INSTRON 8802 servo-hydraulic machine. Simulations show good agreement between numerical and experimental results. The results reveal that the rate of plastic strain accumulation increases for the first few cycles and then reduces in the subsequent cycles. This reduction is more rapid for numerical results in comparison to experiments.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.296-304
• /
• 2012

For development of dyeability, the cotton fabric was dyed repeatedly with persimmon juice by padding mangle. We evaluated the mechanical properties and hand value by Kawabata Evaluation System, and observed the change of surface morphology. The results obtained from this study were as follows. With the increase of repeating padding times of dyeing, the linearity of load-extension curve and tensile energy per unit length of the cotton fabric were increased, but the tensile resilience of fabric was decreased. The value of shear stiffness and shear hysteresis were increased. Also compression resilience and linearity of compression thickness curve were increased. The cotton fabric dyed with persimmon juice had shown the thickness and weight increase as the number of padding increase. As repeating times of dyeing with persimmon juice were increased, among the 6 hand values, the item of stiffness, anti-drape stiffness, fullness and softness were increased, while flexibility with soft feeling and crispness were greatly decreased. The amount of coated persimmon juice on the surface of the fabric was gradually increased as the padding times of dyeing. And cotton fabrics were dyed evenly with persimmon juice by padding mangle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.71-74
• /
• 2000

Pt/Pb$TiO_3$/$SrTiO_3$/p-Si films were prepared by metallo-organic solution deposition(M0SD) method and investigated its structure and ferroelectric properties. Crystallinity of specimen as a funtions of post annealing temperature and the thickness of $SrTiO_3$(STO) buffer layer was studied using XRD and AFM. Based on C-V and P-E curve, $PbTiO_3$(PTO) capacitors showed good ferroelectric hysteresis arising from the polarization switching properties. When the thickness of ST0 buffer layer between PTO and Si substrate was 260 nrn and the post annealing temperature was $650^{\circ}C$, it was showed that production of the pyrochlore phase due to interdiffusion of Si into FTO was prevented. The dielectric constant of FTO thin films calculated from a maximum Cma in the accumulation region was 180 and the dielectric loss was 0.30 at 100 kHz frequency. The memory window in the C-V curve is 1.6V at a gate voltage of 5V.

• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.31-38
• /
• 2021

The precast-buckling restrained braces(PC-BRB) reinforced with engineering plastics that can compensate for the disadvantages in the manufacturing process of the existing buckling restrained brace. In this study, to examine the applicability of PC-BRB to actual structures, example structures similar to school facilities were selected and the reinforcement effect was analyzed analytically according to the damping design procedure of PC-BRB. Load-displacement curve through the incremental loading test appeared similar to the bilinear curve. Applying test result, Analytical model of PC-BRB model was constructed and applied to the example structure. As a result of the analysis, the PC-BRB showed stable hysteresis behavior without lowering the strength, and the inter story drift ratio and the shear force were reduced due to the damping effect. In addition, the reduction ratio of the shear force was similar to the reduction ratio assumed when designing the damping device.

• Steel and Composite Structures
• /
• 제51권6호
• /
• pp.587-600
• /
• 2024

In order to investigate the seismic performance of regionally confined concrete circular column with trapezoid stirrups (TRCCC) under high axial compression ratio, the confinement mechanism of regionally confined concrete was analyzed. Three regionally confined concrete circular columns with trapezoid stirrups were designed, and low cyclic loading tests were conducted at three different axial compression ratios (0.9, 1.1, 1.25) to study the failure mode, hysteresis curve, skeleton curve, deformation capacity, stiffness degradation and energy dissipation capacity of the specimens. The results indicate that the form of regional confinement concrete provides more uniform confinement to the normal confinement, and the confinement efficiency at the edges is 1.4 times that of normal confined concrete. The ductility coefficients of the specimens were all greater than 3 under high axial compression ratios, and the stiffness and horizontal bearing capacity increased with the increase of axial compression ratio. Therefore, it is recommended that the code of design specifications can appropriately relax the axial compression ratio limit for TRCCC. Finally, the spacing between stirrups of TRCCC was analyzed using ABAQUS software. The results showed that as the spacing between the stirrups decreased, the cracking load and peak load of TRCCC increased continuously, but the rate of increase decreases.

• 한국자기학회지
• /
• 제25권4호
• /
• pp.123-128
• /
• 2015

철은 강도와 경도가 높고 전기전도도가 훌륭한 원소이며, 또한 가공이 쉽기 때문에 다양한 분야에서 사용되고 있다. 교량에서는 큰 하중이면서도 경량화를 위하여 강철선으로 된 텐던이 사용되고 있다. 철이 구조용 강으로 사용될 경우 중요한 문제 중 하나인 안전 진단을 위해서는 비파괴 검사(Non-Destructive Testing)가 필수적인데 철강의 자기적 특성이 비선형의 자화곡선과 이력(hysteresis)현상이 있는 자기이력곡선으로 인하여 비파괴 검사에 적용이 어렵다. 본 연구에서는 교량에 부착되어 있는 텐던의 인장변형력을 비파괴 적이면서 자기적인 방법으로 측정하기 위한 기초 연구로, 텐던의 인장변형력에 의한 자기이력 특성변화를 관찰하기 위하여 직경 15.5 mm의 7-strand 텐던에 인장력을 0에서 2 GPa까지 인가할 수 있는 자기이력곡선 측정 장치를 제작하였다. 제작 된 자기이력곡선 측정 장치를 이용하여 시판되고 있는 두 제조회사의 텐던에 대하여 자기적 특성을 조사하였고, 인장변형력에 따른 자기적 특성의 변화가 가장 큰 부분은 자기이력곡선 상의 knee 부분 근처에서의 상대 진폭투자율로 500에서 200까지 감소하였으며 최대 자속밀도 또한 0.6 T 정도로 변화하였다. 텐던의 인장변형력을 측정하는 방법으로 knee 부분의 진폭투자율 측정뿐만 아니라 최대 자속밀도의 측정방법도 가능할 것으로 생각된다.

• 한국재료학회지
• /
• 제10권10호
• /
• pp.703-708
• /
• 2000

최근에 상용차용 디젤 엔진의 성능 향상을 목적으로 엔진 설계가 급격히 변화되면서 캠 팔로우어(cam follower)와 캠(cam) 사이에 작용하는 접동면 하중의 증가로 접동면에서의 마모가 중요한 문제가 되고 있다. 본 연구에서는 기존의 주절체 및 소결합금 캠 팔로우어에 비해 내마모성이 우수한 세라믹 캠 팔로우어를 개발하였다. 잔류 응력을 완화시켜주는 중간층을 사용하지 않고 질화규소($Si_3N_4$) 팁과 중탄소강을 활성납재를 사용하여 직접 접합후 냉각시키는 과정에서 두 모재의 열팽창계수차에 의한 크라우닝(crowning, R) 이 형성되도록 하였다. 접합에 사용한 중탄소강은 열팽창시 이력(hysteresis) 거동을 나타내었으며, $A_{c1}$ 변태점인 $723^{\circ}C$ 이하에서 접합할 경우 원하는 크라우닝이 형성되었다. 접합온도가 $723^{\circ}C$ 이상이 되면 크라우닝 (R) 값이 온도에 따라 지수함수적으로 증가하였으며 이는 중탄소강의 상변태에 의한 열팽창.수축의 이력 특성으로 설명되어질 수 있었다. 규격에 맞는 크라우닝이 형성되는 최적 접합 온도는 $700~720^{\circ}C$의 범위였다. 질화규소와 중탄소강의 직접 접합방법으로 접합과 동시에 크라우닝을 형성시키고 제어함으로써 난가공재인 세라믹을 곡면 가공하지 않고도 적당한 곡률을 갖는 저가의 세라믹 캠 팔로우어를 제조할 수 있었다.