• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.42-48
• /
• 1998

Physicochemical properties of waxy maize starch and oxidized waxy maize starch with sodium hypochlorite $(0{\sim}60\;mg\;CL_2/g\;starch,40^{\circ}C,\;pH\;10,\;3.0\;hr)$ were studied. As sodium hypochlorite concentration was increased, the content of crude lipid and crude protein of the oxidized starch were decreased. And crude protein content and whiteness was considered to show negative regression. However, the crude ash content of the oxidized starch increased significantly with oxidation and bore a positive regression to the chlorine content. There was a progressive increase in the carboxyl content with increasing oxidant level. After pasting in hot water and cooling, viscosity of the oxidized starches were drastically lower than that of native starch . As carboxyl contents of the oxidized starch increased, the solubility and swelling power was increased. When waxy maize starch treated with 0, 1.5, 3.0 and 6.0% sodium hypochlorite, temperature of initial gelatinization of oxidized starch was shown to 65, 65, 60 and $50^{\circ}C$, respectively. The oxidized waxy maize starches also form clearer pastes. Water binding capacity of the oxidized starch decreased as the degree of carboxyl group substitution increased. Waxy maize starch has polygonal and some round granules which range from about 3.7 to $20\;{\mu}m$ in diameter. Surface appearance of the waxy maize starch became rough when oxidized with sodium hypochlorite. When homogenate of the oxidized waxy maize starch solution and corn germ oil was stored under room temperature for 24 hours, the emulsion stability was considered to depend on starch concentration and degree of substitution.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.111-113
• /
• 1986

The axial alcohol in trans-3,3,5-trimethylcyclohexanol was oxidized more readily than the equatorial alcohol in cis-3,3,5-trimethylcyclohexanol by NBS in aqueous dioxane. On the contrary, the equatorial alcohol was preferentially oxidized to the axial one by 10% aqueous sodium hypochlorite in the presence of tetrabutylammonium hydrogen sulfate (TBHS). The specificity indicates the presence of two different mechanism. In acidic medium, the cleavage of C-H bond is rate determining step while the reactivity of the alcohol is important in the presence of TBHS. The mechanism in basic medium without TBHS will be discussed.

• Clinical and Experimental Pediatrics
• /
• v.46 no.2
• /
• pp.198-202
• /
• 2003

Of all toxic inhalant exposures, chlorine is one of the most common toxic chemical inhalants. When acutely inhaled, it can be responsible for symptoms ranging from upper air way irritation to more serious respiratory effects. It can also deteriorate lung function and lead to death. Chlorine and its compounds such as chlorinated cyanurates and hypochlorites are commonly used in water disinfection. The chemical agents discussed in this article are sodium dichloroiso cyanurate and calcium hypochlorite which are the two most popular products for swimming pool chlorination. They are both strong oxidizing agents which are soluble in water. Between the above two alkali agents, acid-base interaction occurred and generated heat. And the acid drove the combination of hypochlorous and chloride ions to form chlorine gas. We have experienced, two boys who had inhalation injuries caused by an accidental explosion which occurred in a swimming pool by mixing two different chlorinating agents : sodium dichloroiso cyanurate and calcium hypochlorite. The children suffered from respiratory difficulties after the exposure. They both required intensive care management and one needed the support of mechanical ventilation.

• Journal of Environmental Health Sciences
• /
• v.8 no.2
• /
• pp.33-46
• /
• 1982

This experiment was carried out for the purpose of reducing alkaloid in reconstituted tobacco sheet and effluent of reconstituted tobacco sheet manufacturing company by treating oxidizing agents such as ozone, sodium hypochlorite, perchloric acid and hydrogen peroxide to tobacco extract created from the manufacturing process of reconstituted tobacco sheet. The effect of alkaloid reduction in tobacco extract by the volume added, time of treatment and pH of oxidizing agents were as follows: 1. When the solid rate of tobacco extract stood at 10 percent, the content of alkaloid, total sugar, total nitrogen and chlorine was 1,600mg/l, 11,000mg/l, 3,200mg/l and 4,000mg/l, respectively. 2. The effect of alkaloid reduction through ozone treatment was in proportion to time of ozone treatment. Alkaloid showed a 31.2 percent reduction under 8 hours' ozone treatment and 0.23g ozone consumed to remove lmg alkaloid. 3. Alkaloid reduction through sodium hypochlorite treatment was influenced by quantity of chlorine in sodium hypochlorite solution. To remove lmg alkaloid, 36.3mg chlorine was used. Reduction of alkaloid was not affected by time of sodium hypochlorite treatment, while showed the best reaction under pH 5-7. 4. The effect of alkaloid reduction by perchloric acid was under the control of the volume added and time of treatment of perchloric acid. The volume of perchloric acid required to remove alkaloid was on the decrease as time of treatment was getting longer. lmg alkaloid was removed by 0.15g perchloric acid under 8 hours' perchloric acid treatment. 5. Alkaloid reduction reacted slowly to the volume added and time of treatment of hydrogen peroxide. Under 8 hours' hydrogen peroxide treatment, it showed maximum removal, registering 10 percent alkaloid reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.154-159
• /
• 2018

Intentional releases occur frequently during maintenance in gas supplying companies, which may result in unpleasant odors, and the possible mistaken belief of a gas accident. Therefore, this study developed a chemical process for effective odorant removal in natural gas using an active chemical that is released intentionally during maintenance and inspection. To develop an effective treatment process for removing the odorant from released natural gas, the effluent concentrations of the odorant in the released gas were measured after a chemical oxidation reaction with a sodium hypochlorite solution in a compact gas scrubbing equipment newly devised in this study. The device was based on a mixed gas vent after the solution inject odorant in the gas through the energy of the venting gas. The cascade combination of a venturi pipe and mixing chamber was developed to remove the odorant effectively from the purposely-released natural gas using an oxidative reaction between the mercaptan compounds (odorant) and the sodium hypochlorite solution. On the other hand, the developed method could be applied limitedly to a relatively small gas release from a low-pressure source. Further studies will be needed to apply the developed process to a large-scale gas release from a high-pressure source.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.139-145
• /
• 2012

The purpose of this study was to evaluate the accuracy of Root ZX and Sybron Mini in determining the working length using 2.5% Sodium Hypochlorite, 2% Chlorhexidine gel and saline. Donnelly's gelatin technique was used for measuring twenty extracted human teeth. Electronic working length was measured at the display 0.5 and 0.0 level of each electronic apex locator using a digital caliper to the nearest 0.01 mm. Each measurement was repeated for each different irrigants. Accuracy of Sybron Mini was not significantly different from the Root ZX in the three different irrigants, and there was no significant difference in the accuracy of electronic apex locators among the irrigants when used as recommended by manufacturer (measuring electronic working length at 0.0 level of Sybron Mini and at 0.5 level of Root ZX).

• The Journal of Advanced Prosthodontics
• /
• v.11 no.3
• /
• pp.155-161
• /
• 2019

PURPOSE. Although dental impression disinfection is determinant to reduce the cross-infection risk, some studies have shown that, in real practice, the disinfection procedures vary considerably. Thus, the aim of this study was to evaluate the antimicrobial effectiveness and the impact on the dimensional stability of addition silicone' impressions of water wash and the most clinically used disinfection solutions: 3% hydrogen peroxide, commercial disinfectant MD520 (Durr) and 1% and 5.25% sodium hypochlorite. MATERIALS AND METHODS. For this investigation, dental impressions were taken on 16 volunteer dental students. The antimicrobial effectiveness of each procedure was evaluated by pour plate method. The dimensional stability was evaluated using a standardized stainless-steel model, according to ANSI/ADA nº19 specification. RESULTS. The study results showed that water wash does not alter the dimensional stability of addition silicone impressions but doesn't reduce the microbial load of the material (P>.05). On the other hand, addition silicone disinfection by immersion with 3% hydrogen peroxide, MD520 (Durr), or sodium hypochlorite at 1% and 5.25% does not alter the dimensional stability significantly but reduces > 99.9% of the microbial load of the impressions (P<.001). CONCLUSION. Addition silicone impressions should always be disinfected after water wash in order to reduce effectively the cross-infection risk. All disinfectants tested showed high antimicrobial efficiency without significant changes in three-dimensional shape of impressions. Hydrogen peroxide and sodium hypochlorite are of particular importance because are easily accessible in dental setting. The less explored hydrogen peroxide could be a valuable alternative for silicone impressions disinfection.

• Biomedical Science Letters
• /
• v.27 no.4
• /
• pp.264-269
• /
• 2021

The purpose of this study was to evaluate the disinfecting efficacy of peracetic acid (PAA), sodium hypochlorite (NaOCl) and phenol, which are representative disinfectants in medical environments using four types of multi-drug resistance (MDR) clinical isolates with healthcare-associated infections (HAI). 26 antibiotic susceptibility tests were conducted for the four types of MDR clinical isolates in the same way as for clinical specimens. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of the disinfectants were determined by using in vitro liquid medium dilution method and inoculation of the plate medium. Both the MIC and MBC of phenol against MRSA and VRE were 3.1%, while those against KPC and MRPA were 6.2%. The MIC and MBC of peracetic acid (PAA) against MRSA, VRE, KPC, and MRPA were 0.18%. The MIC and MBC of sodium hypochlorite (NaOCl) against MRSA were 0.39% and 0.78%, respectively. Both values of MIC and MBC were 0.78% for VRE. In addition, KPC and MRPA showed 0.39% for MIC and 0.78% for MBC. For all MDR strains used in this study, sodium hypochlorite and peracetic acid showed significant sterilizing efficiency, while no clear correlation was identified between antibiotic resistance clinical isolated and ability of disinfection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1528-1534
• /
• 2010

The antibacterial effects of seed decontamination during presoaking before sprouting as an intervention step for eliminating foodborne pathogens on red radish seeds were evaluated. The effect of seed decontamination on seed germination rate was also evaluated. Red radish seeds were inoculated (at a level of 3 to 4 log CFU/g) with Listeria monocytogenes ATCC 19111 and decontaminated with 20,000 ppm calcium hypochlorite, 50 and 100 ppm chlorinated water, acidic electrolyzed water, low-alkaline electrolyzed water, and ozonated water for 6 hours. The control seeds were immersed in distilled water. The germination rate was measured on each treatment for 48 hours. Treatments with 20,000 ppm calcium hypochlorite, acidic and low-alkaline electrolyzed water were more effective than treatments with chlorinated water and ozonated water. Immersion in 20,000 ppm calcium hypochlorite resulted in the largest microbial reduction (more than 3 logs). Treatments with acidic and low-alkaline electrolyzed water reduced APC by 3 logs and L. monocytogenes counts by 2 logs. After sprouting, APC and L. monocytogenes counts on seeds treated with 20,000 ppm calcium hypochlorite, acidic and low-alkaline electrolyzed water were significantly lower than the control. The germination rate ranged from 93.5% to 97.7% except for 20,000 ppm calcium hypochlorite (from 82.3% to 84.8%) after 48 hours. Although the treatments tested in this study will not eliminate L. monocytogenes on inoculated red radish seeds, the results show that rapid growth of surviving cells during sprouting could be prevented if red radish seeds are given a presoak treatment used in combination with a disinfectant treatment of irrigation water.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.154-162
• /
• 2017

The purpose of this study was to investigate the microbial reduction effect of chlorine dioxide and sodium hypochlorite in Korean chive. Korean chive inoculated with foodborne pathogens at the level of approximately 7~8 log CFU/g was treated with various concentration of chlorine dioxide (3, 4, 10, 25 and 100 ppm and sodium hypochlorite (100, 150 and 200 ppm) for 5, 10, 30 and 60 minutes. The treatment of 150 ppm sodium hypochlorite and 50 ppm chlorine dioxide for 30 min reduced the number of total bacteria in Korean chive up to 2.0 log CFU/g. Reduction of microbial levels was observed for all concentrations of sanitizers but their effectiveness did not correspond to their concentration. Due to the quality degradation, 50 ppm chlorine dioxide was not appropriate for Korean chive. Most effective reduction of microbial levels was observed when Korean chive were treated with 9 times more sanitizer in volume. For field application, the treatment of 150 ppm sodium hypochlorite showed 2.7 and 4.0 log CFU/g reductions for numbers of total bacteria and coliforms, respectively. Therefore, washing with sodium hypochlorite of a ratio of 1:9 (Korean chive : 150 ppm sodium hypochlorite (w/v)) for 30 minutes can reduce the number of foodborne pathogen in Korean chive.