• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.668-674
• /
• 2020

Quality Assurance (QA) is essential to provide effective hyperthermia, but in the case of a problem with a hyperthermia cancer therapy system in Korea, the manufacturers or venders are repairing and maintaining the system. In Korea, if an error occurs in the hyperthermia system, the manufacturer and sales agent are repairing and maintaining it. There is no QA protocol suitable for the domestic situation. This study is based on the QA guidelines recommended by institutions such as European Society for Hyperthermia Oncology (ESHO), Hellenic Society of Oncologic Hyperthermia (HSOH), and the results of questionnaires to hospitals that have hyperthermia cancer therapy systems in Korea. By developing an optimized QA protocol, we aim to reduce the errors and inaccuracies that can occur in during hyperthermia such as measurement of temperature, instrumentation, and heat transfer. In addition, we will visit a hospital with a hyperthermia cancer therapy system in Korea to perform a QA based on this study, and study to specify tolerances and accurate QA set-up parameters using the measured QA results.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1309-1312
• /
• 1987

Hyperthermia for the treatment of cancer has been introduced for a long time and the biological effect for the use of hyperthermia to malignant tumors has been well established and encouraging clinical results has been observed. Unfortunately, the engineering or technical aspects of hyperthermia for the deep seated tumors has not been satisfactory. We have researched and developed the radiofrequency capacitive hyperthermia system (GHT- RF8). It was composed with 8-9 MHZ RF generator, capacitive electrode, matching system, cooling system, temperature measuring system and control computer. The thermal profile was investigated in agar phantom, animals and in human tumors, which was heated with capacitive RF device.

• Journal of electromagnetic engineering and science
• /
• v.9 no.4
• /
• pp.188-193
• /
• 2009

A K-band low-power miniaturized planar-type hyperthermia system was developed to replace massive and expensive equipment. The system consists of a VCO with a buffer amplifier, a high-power amplifier module, a 20-dB-coupled line coupler, a chip circulator and two power detectors for signal generation, amplification and power monitoring. All these components have been implemented in planar form on two module blocks. The total size of the hyperthermia system was less than $10\times6.5\times3\;cm^3$. In order to verify the system performance, ablations were carried out on nude mice xenografted with human breast cancer. Ablation results show performance comparable to the massive components-based system. This work shows the feasibility of a low-cost miniaturized hyperthermia system for practical clinical applications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.381-387
• /
• 2005

Malignant hyperthermia is a catastrophic, hypermetabolic syndrome that arises in susceptible individuals when they are exposed to certain inhalational anesthetics or muscle relaxants. It is characterized by hyperthermia, tachycardia, acidosis, and muscle rigidity. It has been noted that the majority of cases of malignant hyperthermia are fatal unless early diagnosis and treatment are performed. We experienced a 24 year old male Malignant hyperthermia presented for orthognathic surgery under $O_2-N_2O$-sevoflurane anesthesia without succinylcholine. Two half hours after induction, tachycardia developed and was followed by unstable blood pressure and hyperpyrexia. Anesthesia was terminated and vigorous emergency treatment was attempted. The patient was treated by the intravenous administration of dantrolene sodium. The diagnosis of an acute malignant hyperthermia reaction by clinical criteria can be difficult because of the nonspecific nature and variable incidence of many of the clinical signs and laboratory findings. So the malignant hyperthermia clinical grading scale is recommended for use as an aid to the objective definition of this disease. This clinical grading system provides a new and comprehensive clinical case definition for the malignant hyperthermia syndrome. We recently encountered a case of delayed malignant hyperthermia during sevoflurane anesthesia that was successfully treated by the intravenous administration of dantrolene sodium. In conclusion, exposure to sevoflurane should be avoided in patients thought to be susceprible to malignant hyperthermia.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.63-68
• /
• 1987

The biological effects for the use of hypertherinla to treat malignant tumors has been well studied and encouraging clinical results have been reported. However, the engineering and technical aspects of hyperthermia for the deepseated tumors has not been satisfactory. We have developed the FF capacitive hyperthermia device(GHT RF8)by cooporation with Yonsei Cancer Center and Green Cross Medical Equipment Corporation. It was composed with 8.10 MHz RF generator, capacitive electrode, matching system, cooling system, temperature measuring thermocouples and control PC computer. We have measured the temperature and thermal distribution in agar phantom, animals and human tumors.

• Journal of the Korean Society of Combustion
• /
• v.16 no.2
• /
• pp.33-39
• /
• 2011

We demonstrated heat generation efficiency of the magnetic hyperthermia system to find optimal condition using gelatin tissue phantom. Magnetic hyperthermia induction can be used to make heat generation with different concentration of $Fe_3O_4$ iron oxide inside tissue phantom and magnetically labeled cells by applying AC magntic field at a frequency of 145 kHz. It was observed that the maximum temperature achieved in the magnetic gelatin tissue phantom increased with the concentration of $Fe_3O_4$ iron oxide and alternating magnetic field intensity. Results were discussed with respect to further optimization of therapeutic technique for biomedical application with modified functional nanoparticles.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1744-1753
• /
• 2016

The main purpose of this article is a complex hyperthermia applicator system design for treatment of head and neck region. The applicator system is composed of four waveguides with a stripline horn aperture and circular water bolus. The specific absorption rate (SAR) and temperature distribution from this applicator in various numerical phantom models was investigated. For used targets, the treatment planning based on the optimization process made through the SEMCAD X software is added to show the steering possibilities of SAR and thereby temperature distribution. Using treatment planning software, we proved that the SAR and temperature distribution can be effectively controlled (by amplitude and phase changing) improving the SAR and temperature target coverage approximately by 20 %. For the proposed applicator system analysis and quantitative evaluation of two parameters 25 % iso-SAR and $41^{\circ}C$ iso-temperature contours in the treatment area with the respect to sensitive structures in treatment area were defined. To verify our simulation results, the real measurement of reflectivity coefficient as well as the temperature distribution in a homogenous phantom were performed.

• Proceedings of the KOSOMBE Conference
• /
• v.1985 no.06
• /
• pp.9-12
• /
• 1985

This paper covers the design and implementation process of RF hypertermia system for cancer therapy. Among many hyperthermic methods, RF capacitive heating method is discussed because it can heat the deep-seated tumors selectively. The RF power oscillator and its applicators were designed and implemented. And the experiments were performed with agar phantom and dog to prove that the system can heat any depth selectively. And the electrical safety and appropriateness of clinical application was proved through the human living-body test.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3239-3245
• /
• 2012

Gliomas are a group of heterogeneous primary central nervous system tumors. Hyperthermia has proven to be a potential therapeutic tool for cancers in the clinic. However, the molecular mechanisms of hyperthermia remain unclear. The objective of this study was to investigate the effects of hyperthermia on the invasiveness in C6 glioma cells and related molecular pathways. Here our data show hyperthermia stimulated the release of tumor necrosis factor-alpha (TNF-${\alpha}$) and decreased C6 glioma cell migration and invasive capability at 30, 60, 120 and 180 min; with increased spontaneous apoptosis in C6 glioma cells at 120 min. We also found mitogen-activated protein kinase (P38 MAPK) protein expression to be increased and nuclear factor-kappa B (NF-${\kappa}B$) protein expression decreased. Based on the results, we conclude that hyperthermia alone reduced invasion of C6 glioma cells through stimulating TNF-${\alpha}$ signaling to activate apoptosis, enhancing P38 MAPK expression and inhibiting the NF-${\kappa}B$ pathway, a first report in C6 rat glioma cells.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1334-1339
• /
• 2018

Spherical nickel ferrite nanoparticles were synthesized using the thermal decomposition method and coated with cetyl trimethyl ammonium bromide (CTAB) after the synthesis. Transmission electron microscopy images showed that the average diameter of the particles was 9.40 nm. The status of the CTAB-coating on the surface of the particles was checked using Fourier-transform infrared spectroscopy. Their hysteresis curve showed that the particles exhibited a superparamagnetic behavior. The $T_1$ and the $T_2$ relaxations of the nuclear spins were observed in aqueous solutions of the particles with different particles concentrations by using a magnetic resonance imaging (MRI) scanner, which showed that the $T_1$ and the $T_2$ relaxivities of the particles in water were $0.57mM^{-1}{\cdot}s^{-1}$ and $10.42mM^{-1}{\cdot}s^{-1}$, respectively. In addition, using an induction heating system, we evaluated their potentials for magnetic hyperthermia applications. The aqueous solution of the particles with a moderate concentration (smaller than 6.5 mg/mL) showed a saturation temperature larger than the hyperthermia target temperature of $42^{\circ}C$. These findings show that the CTAB-coated nickel ferrite particles are suitable for applications as $T_2$ contrast agents in MRI and heat generators in magnetic hyperthermia.