• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.391-400
• /
• 2008

Odor management is significantly concerned with sustainable livestock production because odor nuisance is a primary cause for complaint to neighbors. This study was conducted to measure the concentration of odorous compounds, odor intensity, and odor offensiveness at unit process in animal waste treatment facility combined composting and methane fermentation process by an instrumental analysis and direct olfactory method. Ammonia, sulfur-containing compounds, and volatile fatty acid were analyzed at each process units and boundary area in summer and winter, respectively. Higher concentration of odorants occurred in the summer than in the winter due to high ambient temperature. The maximum concentration of odorants was detected in composting pile when mixed manure was being turned followed by inlet, curing, outlet, and screen & packing process. Highest concentration of detected odorous compounds was ammonia ranging from 3.4 to 224.7 ppm. Among the sulfur-containing compounds measured, hydrogen sulfide was a maximum level of 2.3 ppm and most of them exceeded reported odor detection thresholds. Acetic acid was the largest proportion of VFA generated, reaching a maximum of 51 to 89%, followed by propionic and butyric acid at 1.9 to 35% and 1.8 to 15%, respectively. Malodor assessment by a human panel appeared a similar tendency in instrumental analysis data. Odor quotient for predicting major odor-causing compounds was calculated by dividing concentrations measured in process units by odor detection thresholds. In the composting process, hydrogen sulfide, ammonia, dimethyl sulfide, and methyl mercaptan were deeply associated with odor-causing compounds, while the major malodor compounds in the inlet process were methyl mercaptan, hydrogen sulfide, and butyric acid.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.49-56
• /
• 2017

Purpose: To evaluate the accuracy of the Iterative Metal Artifact Reduction (IMAR) algorithm in correcting CT (computed tomography) images distorted due to a metal artifact and to evaluate the usefulness when proton therapy plan was plan using the images on which IMAR algorithm was applied. Materials and Methods: We used a CT simulator to capture the images when metal was not inserted in the CIRS model 062 Phantom and when metal was inserted in it and Artifact occurred. We compared the differences in the CT numbers from the images without metal, with a metal artifact, and with IMAR algorithm by setting ROI 1 and ROI 2 at the same position in the phantom. In addition, CT numbers of the tissue equivalents located near the metal were compared. For the evaluation of Rando Phantom, CT was taken by inserting a titanium rod into the spinal region of the Rando phantom modelling a patient who underwent spinal implant surgery. In addition, the same proton therapy plan was established for each image, and the differences in Range at three sites were compared. Results: In the evaluation of CIRS Phantom, the CT numbers were -6.5 HU at ROI 1 and -10.5 HU at ROI 2 in the absence of metal. In the presence of metal, Fe, Ti, and W were -148.1, -45.1 and -151.7 HU at ROI 1, respectively, and when the IMAR algorithm was applied, it increased to -0.9, -2.0, -1.9 HU. In the presence of metal, they were 171.8, 63.9 and 177.0 HU at ROI 2 and after the application of IMAR algorithm they decreased to 10.0 6,7 and 8.1 HU. The CT numbers of the tissue equivalents were corrected close to the original CT numbers except those in the lung located farthest. In the evaluation of the Rando Phantom, the mean CT numbers were 9.9, -202.8, and 35.1 HU at ROI 1, and 9.0, 107.1, and 29 HU at ROI 2 in the absence, presence of metal, and in the application of IMAR algorithm. The difference between the absence of metal and the range of proton beam in the therapy was reduced on the average by 0.26 cm at point 1, 0.20 cm at point 2, and 0.12 cm at point 3 when the IMAR algorithm was applied. Conclusion: By applying the IMAR algorithm, the CT numbers were corrected close to the original ones obtained in the absence of metal. In the beam profile of the proton therapy, the difference in Range after applying the IMAR algorithm was reduced by 0.01 to 3.6 mm. There were slight differences as compared to the images absence of metal but it was thought that the application of the IMAR algorithm could result in less error compared with the conventional therapy.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.2
• /
• pp.130-134
• /
• 2006

Objectives : Oxidative DNA damage is a known risk factor of lung cancer. The glutathione peroxidase (GPX) antioxidant enzyme that reduces hydrogen peroxide and lipid peroxides plays a significant role in protecting cells from the oxidative stress induced by reactive oxygen species. The aim of this case-control study was to investigate effects of oxidative stress and genetic polymorphisms of the GPX1 genes and the interaction between them in the carcinogenesis of lung cancer. Methods : Two hundreds patients with lung cancer and 200 age- and sex-matched controls were enrolled in this study. Every subject was asked to complete a questionnaire concerning their smoking habits and their environmental exposure to PAHs. The genotypes of the GPX1 and 8-oxoguanine glycosylase 1 (hOGG1) genes were examined and the concentrations of urinary hydroxypyrene (1-OHP), 2-naphthol and 8-hydroxydeoxyguanosine (8-OH-dG) were measured. Results : Cigarette smoking was a significant risk factor for lung cancer. The levels of urinary 8-OH-dG were higher in the patients (p<0.001), whereas the urinary 1-OHP and 2-naphthol levels were higher in the controls. The GPX1 codon 198 polymorphism was associated with an increased risk of lung cancer. Individuals carrying the Pro/Leu or Leu/Leu genotype of GPX1 were at a higher risk for lung cancer (adjusted OR=2.29). In addition, these individuals were shown to have high urinary 8-OH-dG concentrations compared to the individuals with the GPX1 Pro/Pro genotype. On the other hand, the polymorphism of the hOGG1 gene did not affect the lung cancer risk and the oxidative DNA damage. Conclusions : These results lead to a conclusion that individuals with the GPX1 Pro/Leu or Leu/Leu genotype would be more susceptible to the lung cancer induced by oxidative stress than those individuals with the Pro/Pro genotype.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1660-1668
• /
• 2007

The non-ionic surfactant (NIS) Tween 80 was evaluated for its ability to influence invitro cumulative gas production, dry matter digestibility, cellulolytic enzyme activities, anaerobic microbial growth rates, and adhesion to substrates by mixed rumen microorganisms on rice straw, alfalfa hay, cellulose filter paper and tall fescue hay. The addition of NIS Tween 80 at a level of 0.05% increased significantly (P<0.05) in vitro DM digestibility, cumulative gas production, microbial growth rate and cellulolytic enzyme activity from all of substrates used in this study. In vitro cumulative gas production from the NIS-treated substrates; rice straw, alfalfa hay, filter paper and tall fescue hay was significantly (P<0.05) improved by 274.8, 235.2, 231.1 and 719.5% compared with the control, when substrates were incubated for 48 hr in vitro. The addition of 0.05% NIS Tween 80 to cultures growing on alfalfa hay resulted in a significant increase in CMCase (38.1%), xylanase (121.4%), Avicelase (not changed) and amylase (38.2%) activities after 36 h incubation. These results indicated that the addition of 0.05% Tween 80 could greatly stimulate the release of some kinds of cellulolytic enzymes without decreasing cell growth rate in contrast to trends reported with aerobic microorganism. Our SEM observation showed that NIS Tween. 80 did not influence the microbial adhesion to substrates used in the study. Present data clearly show that improved gas production, DM digestibility and cellulolytic enzyme activity by Tween 80 is not due to increased bacterial adhesion on the substrates.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.515-521
• /
• 2008

This experiment was conducted to investigate effects of non-ionic or zwitterionic (+/-) surfactants on digestibility of rice straw, and changes of growth of rumen mixed microbes, pH, and gas production during in vitro fermentation. Also, during in vitro ruminal fermentation, microbial attachment on rice straw was investigated using scanning electron microscopy (SEM). Tween 80 or SOLFA-850 for non-ionic surfactant (NIS), and 3-(Dodecyldimethylammonio) propanesulfanate (DDAP) for zwitterionic surfactant (ZIS) was supplemented by 0.05% and 0.1% in Dehority's artificial medium containing Holtein rumen fluid, respectively, and the substrate for fermentation was rice straw passed through 1 mm screen. The experiment was composed of 7 treatments (two levels of two NISs, two levels of a ZIS) including the control, and 6, 12, 24, 48 and 72 hr of fermentation time with 3 replications per treatment. Treatment of Tween 80 increased in vitro DM digestibilities during 48 hr and 72 h post fermentations compared to the other treatments, whereas treatment of DDAP as a ZIS resulted in decreased DM digestibility than that of the control from 24 hr post fermentation (P<0.05). Gas production in vitro was greater (P<0.05) with addition of NIS than the control or ZIS, and increased as fermentation time elapsed. Rumen mixed microbial growth was greatest with addition of Tween 80 as NIS, and lowest when DDAP as ZIS was supplemented to the fermentation tube (P<0.05). In SEM observation, rumen microbial population attached on rice straw particle was greater with addition of NIS, but was less with addition ZIS compared with the control. In conclusion we could not found any positive effects of ZIS surfactants on rumunal fermentation characteristics and rumen microbial growth rates.

• Korean Journal of Ecology and Environment
• /
• v.49 no.4
• /
• pp.279-288
• /
• 2016

Stable Isotope Analysis(SIA) of carbon and nitrogen is useful tool for the understanding functional roles of target organisms in biological interactions in the food web. Recently, mixing model based on SIA is frequently used to determine which of the potential food sources predominantly assimilated by consumers, however, application of model is often limited and difficult for non-expert users of software. In the present study, we suggest easy manual of R software and package SIAR with example data regarding selective feeding of crustaceans dominated freshwater zooplankton community. We collected SIA data from the experimental mesocosms set up at the littoral area of eutrophic Chodae Reservoir, and analyzed the dominant crustacean species main food sources among small sized particulate organic matters (POM, <$50{\mu}m$), large sized POM (>$50{\mu}m$), and attached POM using mixing model. From the results obtained by SIAR model, Daphnia galeata and Ostracoda mainly consumed small sized POM while Simocephalus vetulus consumed both small and large sized POM simultaneously. Copepods collected from the reservoir showed no preferences on various food items, but in the mesocosm tanks, main food sources for the copepods was attached POM rather than planktonic preys including rotifers. The results have suggested that their roles as grazers in food web of eutrophicated reservoirs are different, and S. vetulus is more efficient grazer on wide range of food items such as large colony of phytoplankton and cyanobacteria during water bloom period.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.81-88
• /
• 2016

This study was conducted to find out the effects of Improvement of Botanical Composition Technology (IBCT) on the forage production and ecological characteristics in a Rumex acetosella-dominated hilly pasture in Pyeongchang, in a period from August 2013 to the end of growing season in October 2015. $2MT\;ha^{-1}$ limestone was applied in August 2013 and April 2014. Liming significantly increased soil pH from 4.69 to 5.47 and then the soil pH consistently hovered at 4.91~4.98. For every grazing time, plant height was found to be higher with the application of IBCT as compared with the control. After grazing, no significant difference in plant height was found between the IBCT group and the control. Changes in the botanical composition of grassland can be affected by a lot of circumstances, but application of IBCT decreased Rumex acetosella from 12% to 2%, while also increasing the proportion of pasture. In relation to the botanical composition of grass, orchardgrass and timothy showed the highest percentages throughout the whole study period. The proportion of Kentucky bluegrass increased over time while tall fescue steadily decreased. The totals for grazing days were 58 in 2014 and 55 in 2015. Average herbage dry matter intake was $7,848kg\;ha^{-1}$ in 2014 and $6,941kg\;ha^{-1}$ in 2015. Due to the application of IBCT, dry matter productivity showed a significant increase of 59% during the first grazing period in 2014 (3,437 kg ha and 5,460 kg ha in control and IBCT). In 2015, the total dry matter yield of the IBCT group was 51% greater than the control ($5,742kg\;ha^{-1}$ and $8,685kg\;ha^{-1}$ in control and IBCT). Under acidic soil conditions, red sorrel can grow more strongly than grasses because it has better tolerance in dry and acidic conditions. Therefore, constant management is required in order to keep red sorrel from dominating the hilly pasture. In this study, the application of IBCT was able to effectively control weeds at all points. As a result, total management, including improvement of soil, overseeding, and application of selective herbicide and fertilizer, is needed to maintain excellent grassland conditions due to the limiting effects of environmental factors on grassland productivity.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.28-36
• /
• 2018

Studies on suspected endocrine disrupting pesticide (EDP) residues in agricultural products were carried out in 2016 in Busan, Korea. Twelve different EDPs, ranging in concentration between 0.003-2.049 mg/kg, were detected in 19.5% of 462 samples. About 0.2% of agricultural product samples exceeded the maximum residue limits (MRLs). Risk indices of all of the EDPs were less than 10% of the acceptable daily intake (ADI). The outcomes indicated that the risk groups at highest risk of exposure to diazinon (found in Korean cabbages) and carbendazim (found in apples) were females aged 40 to 49 and young males less than 10 years old, respectively. Based on the stochastic assessment at $95^{th}$ percentile (P95), risk index in these risk groups accounted for 8.38 and 2.98% of ADIs. The results showed that the occurrence of EDP residues in agricultural products could not be considered a public health problem.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.658-667
• /
• 2015

This research was conducted to investigate the influence of various levels of fused superphosphate as pre-planting fertilizer on the growth of red-leaf lettuce and changes in the chemical properties of the soil solution in three root media, namely coir-dust plus expanded rice hull (8:2, v/v; CD+ERH), carbonized rice hull (6:4; CD+CRH), or ground and aged pine bark (8:2; CD+GAPB). The amounts of fused superphosphate (FSP) incorporated into the three root media during formulation were controlled from 0 to $6.0g{\cdot}L^{-1}$ in $1.5g{\cdot}L^{-1}$ increments. The root media containing fertilizers were packed into 300 mL plastic pots and seedlings of red-leaf lettuce at the 3rd leaf stage were transplanted. After transplanting, the crops were fed with a solution of neutral fertilizer ($100mg{\cdot}L^{-1}$). The growth of red-leaf lettuce was investigated 5 weeks after transplanting and soil solutions were extracted and analyzed every week for pH, EC, and concentrations of macro-nutrients. The elevation of application rates of FSP in the three root media resulted in better growth, and the crops grown in CD+ERH and CD+GRPB had greater fresh and dry weights than those in CD+CRH when compared among the treatments of equal amounts of FSP. The pH and $PO_4{^{-3}}$ concentrations in the soil solution of CD+CRH at 3 weeks after transplant were in the ranges of 4.0 to 4.8 and 20 to $100mg{\cdot}L^{-1}$, respectively. These were lower pH and higher $PO_4{^{-3}}$ concentrations than those in CD+ERH and CD+GAPB. The $K^+$ concentrations were higher in CD+CRH than those in the other two root media, and the elevation of FSP application rates resulted in higher $Ca^{+2}$, $Mg^{+2}$ and $SO_4{^{-2}}$ concentrations in soil solution of the three root media. The $NO_3$-N concentrations in soil solution rose continuously during crop cultivation, implying that the leaching percentage was elevated. The soil solution EC varied, showing the same tendencies as the $NO_3$-N concentrations. The above results indicated that the CD+ERH and CD+GRPB media performed better than CD+CRH, and optimum application rates of FSP in the three root media were 4.5 to $6.0g{\cdot}L^{-1}$ for pot cultivation of red-leaf lettuce.