• Molecular & Cellular Toxicology
• /
• v.5 no.3
• /
• pp.216-221
• /
• 2009

Bisphenol A (BPA) is commonly used in the production of pharmaceutical, industrial, and housing epoxy, as well as polycarbonate plastics. Owing to its extensive use, BPA can contaminate the environment either directly or through derivatives of these products. BPA has been classified as an endocrine disruptor chemicals (EDCs), and the primary toxicity of these EDCs in males involves the induction of reproductive system abnormality. First, in order to evaluate the direct effects on the Y chromosome associated with reproduction, we evaluated Y chromosome abnormalities using a Y chromosome microdeletion detection kit. However, we detected no Yq abnormality as the result of BPA exposure. Secondly, we performed high-density oligonucleotide array-based comparative genome hybridization (CGH) to assess genomic alteration as a component of our toxicity assessment. The results of our data analysis revealed some changes in copy number. Seven observed features were gains or losses in chromosomal DNA (P-value<1.0e-5, average log2 ratio>0.2). Interestingly, 21 probes of chr7:7312289-10272836 (qA1-qA2 in cytoband) were a commonly observed amplification (P-value 3.69e-10). Another region, chr14:4551029-10397399, was also commonly amplified (P-value 2.93e-12, average of log2 ratios in segment>0.3786). These regions include many genes associated with pheromone response, transcription, and signal transduction using ArrayToKegg software. These results help us to understand the molecular mechanisms underlying the reproductive effects induced by BPA.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.15-24
• /
• 2011

This study discusses an equity analysis performed to supplement the existing bus service evaluation system. The equity of 179 feeder bus routes in the city of Seoul(Year 2009) is analyzed by employing the modified BCC model along with the desirable inputs such as a number of bus stops and a frequency of operations. In the analysis, each DMU (Decision Making Unit) is assumed to use the desirable inputs, and produces both the index of equity and the index of accessibility. We apply an input-oriented modified BCC model to analyze the equity of the DMUs. The computational result indicates that only 9% of the feeder bus routes are equitable among the total DMUs and the average equity estimate is 0.702. It is also suggested that on average approximately 60% increases of desirable inputs (i.e., a number of bus stops and a frequency of operations) are needed in order to improve equity of DMU in the city of Seoul. The result of the tobit regression analysis on the determinant factors affecting the equity of DMUs shows that all the independent variables (i.e., a number of bus stops and a frequency of operations) are statistically significant at 5% significance level, and the number of bus stops is found to be the most influential factor.

• Journal of the Korean Society of Tobacco Science
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2010

The aim of this study is to compare the sensitivity of both two NCI-H292 and A549 cell types to acute inflammatory responses induced by cigarette smoke. For this, we treated two kinds of smoke fractions derived from 2R4F reference cigarettes: total particulate matter(TPM) collected onto a Cambridge filter pad and gas/vapor phase(GVP) prepared by bubbling through in buffer solution. When we measured cellular cytotoxicity by neutral red uptake assay after treatment for 24 hours, TPM and GVP induced cytotoxic effect in a dose-dependent manner in the range of 10-$100{\mu}g$/mL and 60-$300 {\mu}g$/mL., respectively, in both cell types without any cellular difference. Additionally, when we examined acute inflammatory responses by analyzing cytokines secreted into culture media including tumor necrosis factor-$\alpha$ (TNF-$\alpha$), interleukin-8(IL-8), and transforming growth factor-$\alpha$(TGF-$\alpha$) as well as matrix metalloproteinase-1(MMP-1), the treatment with smoke fractions increased those marker proteins in a dose-dependent manner in NCI-H292. Meanwhile, in A549 cells only MMP-1 was observed to be increased in a dose-dependent fashion. Collectively, our data indicate that NCI-H292 cell type is more sensitive to cigarette smoke-induced inflammatory response than A549 cells. This suggests that NCI-H292 could be useful as an in vitro evaluation tool to assess harmful effects of cigarette smoke.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.60-67
• /
• 2014

The ability of electronic packages and assemblies to resist solder joint failure is becoming a growing concern. This paper reports on a study of high speed shear energy of Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder with different electroless Ni-P thickness, with $HNO_3$ vapor's status, and with various pre-conditions. A high speed shear testing of solder joints was conducted to find a relationship between the thickness of Ni-P deposit and the brittle fracture in electroless Ni-P deposit/SAC405 solder interconnection. A focused ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the fractured pad surface with and without $HNO_3$ vapor treatment. A scanning electron microscopy (SEM) and an energy dispersive x-ray analysis (EDS) confirmed that there were three intermetallic compound (IMC) layers at the SAC405 solder joint interface: $(Ni,Cu)_3Sn_4$ layer, $(Ni,Cu)_2SnP$ layer, and $(Ni,Sn)_3P$ layer. The high speed shear energy of SAC405 solder joint with $3{\mu}m$ Ni-P deposit was found to be lower in pre-condition level#2, compared to that of $6{\mu}m$ Ni-P deposit. Results of focused ion beam and energy dispersive x-ray analysis of the fractured pad surfaces support the suggestion that the brittle fracture of $3{\mu}m$ Ni-P deposit is the result of Ni corrosion in the pre-condition level#2 and the $HNO_3$ vapor treatment.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.403-409
• /
• 2005

Methyl tert-butyl ether (MTBE) contamination in groundwater often coexists with benzene, toluene, ethylbenzene, and xylene (BTEX) near the source of the plume. Then, groundwater contamination problems have been developed in areas where the chemical is used. Common sources of water contamination by BTEX and MTBE include leaking underground gasoline storage tanks and leaks and spills from above ground fuel storage tanks, etc. In oil-contaminated environments, anaerobic biodegradation of BTEX and MTBE depended on the concentration and distribution of terminal electron acceptor. In this study, effect of electron acceptor on the anaerobic biodegradation for BTEX and MTBE-contaminated soil was investigated. This study showed the anaerobic biodegradation of BTEX and MTBE in two different soils by using nitrate reduction, ferric iron reduction and sulfate reduction. The soil samples from the two fields were enriched for 65 days by providing BTEX and MTBE as a sole carbon source and nitrate, sulfate or iron as a terminal electron acceptor. This study clearly shows that degradation rate of BTEX and MTBE with electron acceptors is higher than that without electron acceptors. Degradation rate of Ethylbenzene and Xylene is higher than that of Benxene, Toluene, and MTBE. In case of Benzene, Ethylbenzene, and MTBE, nitrate has more activation. In case of Toluene and Xylene, sulfate has more activation.

• Korean Journal of Veterinary Research
• /
• v.31 no.4
• /
• pp.479-484
• /
• 1991

Encephalomyocarditis(EMC) virus was isolated from the mummified and stillborn pigs at a swine farm in Chonnam Province, experienced with EMC infection over the period Oct.~Dec. of 1989. In addition some cultural, serological properties of the isolates and experimental infections in the piglets were studied. The results obtained were as follows; 1. Two EMC virus strains with HA titers and CPE similar to EMC-ATCC were established in a baby hamster kidney (BHK)-21 cell line by inoculating homogenates of brain and heart of the 19 mummified or stillborn pigs and designated $K_3$ and $K_{11}$. 2. At the second BHK-21 cell line passage of the initial isolates CPE appeared after incubation for 16~18 hours, while at the fourth and fifth passage the highest titer of HA was recorded, titer of HA using rat and guinea pig erythrocytes. 3. One pig inoculated with the isolate $K_3$ showed dyspnea as clinical signs and died at the 10 days after inoculation at necropsy white necrotic foci were observed from the dead animal heart. 4. Although all the rest surviving pigs showed increases in antibody titer and body temperature of $40^{\circ}C$ above for the initial 2~4 days followed by the return to normal, there were no gross lesions when the animals were sacrificed at the 2 weeks after inoculation.

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.784-792
• /
• 2008

Greater focus must be placed on ensuring that the water quality model (WQM) reflects the objective of its application and the characteristics of the water environment properly before it is selected. In the development or application of WQM, various factors influencing the model predictions should be reviewed so that it can perform more properly and reasonably based on scientific theory. This study reviewed the characteristic of existing WQM and the domestic river environment to find the requirements of the model application for TMDLs management in Korea. In this study, a water quality model, QUAL-NIER, was developed based on the USEPA's QUAL2E. The core structure and reaction scheme of the model was established followed by the formulation of equations according to the scheme with some supplements on the reaction mechanisms which are necessary for domestic rivers. Algorithms on the equations were set up and programmed to form a computer-based model. The developed model, QUAL-NIER was applied to the main stem of the Nakdong river. The model was calibrated and verified to data measured in 2004. The model results displayed good agrement with the field measurements for both calibration and verification. From this study, it was concluded that the developed QUAL-NIER model was very powerful with regard to the water quality simulation in domestic rivers.

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.99-109
• /
• 1990

The following, Chung, Am, Chun, Seo, Rok, Shin, Oh, Cho, Po, listed in [Che Min Yo Sul] are as follows; 1. Chung means polutry and meat like pork and beef cooked with Ja. Am is flavoring meat in a seasoned broth, which is seasoned with Yeom Shi, green onion and pepper. Chun is stir-fryed fish, beef or pork in a small amount of broth and Apchunbup, a kind of Chun, is stir-fryed with Yeom Shi Juice. 2. Cheo, Rok stands for boiled meat pickled in vinegar. 3. There are twenty kinds of Chuk, which is broiled polutry, fish, shellfish and meat like pork and beef together with vegetables and spices. 4. Shin, Oh, Po, are a type of meat preservation method by using Nurook, salt, alchol or broiling it in Bong Chuk way and then preserving it.

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.85-97
• /
• 1990

This study is carried out to understand and analyze the cooking and processing methods presented in the CHE MIN YO SUL-Chinese books of husbandary-written in sixth century that composed of two part (agricultural production and product-utilization). Especially Ouja, Po, Suk, Keng, Hak, Jeung and Bu written in part II which studied this time. There are Eight kinds of Ouja, seven kinds of Po and Suk, Twentynine kinds of Keng and Hak, Sixteen kinds of Jeung and Bu. Ouja is something like Korean Kajamisikhae which cooked with fresh fish, dried fish, pork, rice and then seasoned. Po is a dried slice beef, poultry and fish with seasoned, Suk is a dried in original shape with seasoned. These are something like Korean dried beg, dried fish and Amchipo. Keng is a clear soup and Hak is a boiled muddy soup with cereal. Jeung is a steamed beef, poultry, fish in the earthenware steamer and Bu is a roasted in the copper pan.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.906-913
• /
• 2014

The purpose of this study was to investigate the quality characteristics of white bean based Yanggaeng containing various levels of pomegranate powder (0, 2, 4 and 8%, w/w). The pH values of Yanggaeng containing pomegranate powder were found to decrease when increasing the amount of pomegranate powder. However, moisture and sugar contents were increased (p<0.05). For color values, both L and b values were reduced by increasing the amount of pomegranate powder, while a values were increased significantly (p<0.05). In textural properties, the addition of pomegranate powder resulted in the increase of hardness, chewiness and gumminess, while cohesiveness and springiness decreased. Antioxidant activities, evaluated by DPPH radical scavenging capacity, and total phenolic substances content increased when increasing the amount of pomegranate powder. Results of descriptive analysis showed that by increasing the amount of pomegranate powder, some attributes such as the intensity of the flavor, sourness, hardness and chewiness increased (p<0.05), but there was no statistically significant difference in sweetness. In a preference test, Yanggaeng containing 4% pomegranate powder appeared to be the most preferred for all attributes tested including overall acceptability. It was concluded that Yanggaeng containing pomegranate can be prepared with good sensory properties and antioxidant activities, and the addition of 4% pomegranate powder was found to be ideal.