• 청정기술
• /
• 제16권4호
• /
• pp.254-257
• /
• 2010

중국 Liaoning에서 산출된 천연 수활석(brucite)을 원료로 $Mg(OH)_2$ slurry를 제조하고, 그 탈황 성능을 조사하였다. 수활석의 입도분포의 차이 및 수열처리에 의한 활성화 효과를 검토하였다. 80 mesh 이하의 수활석 시료에 비해 입자의 크기가 작고 입도분포가 좁은 1000 mesh 이하의 사료가 de-$SO_2$ 효율이 더 높은 것을 확인할 수 있었다. 한편, 80 mesh 이하의 수활석 시료를 비교적 낮은 온도인 363 K에서 3 h 동안 수열 처리하여 매우 높은 de-$SO_2$ 성능 개선 효과를 얻을 수 있었다.

• 한국분말재료학회지
• /
• 제18권1호
• /
• pp.73-77
• /
• 2011

$Y(OH)_3$ nanowires were synthesized by a hydrothermal reaction of metallic Y with aqueous solution of LiOH. The morphology and the size of the nanowires changed with varying the volume of the LiOH solution inside the autoclave. $Y(OH)_3$ nanowires transformed to $Y_2O_3$ by a subsequent heat-treatment without morphological change. By a proper control of hydrothermal reaction parameter and heat-treatment, the yield of pure $Y_2O_3$ nanowires up to 97% was attained.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.71-82
• /
• 1995

The weathered two-mica granite is widely distributed in Korea and called a kind of ground rock for kaolin. The major minerla compositions are consist of this quartz, feldspar, mica and clay mineral. At present, only a small portion of this granite is used as the material for the low-grade tile industry due to the low S.K. value and the high contents of impurities such as Fe2O3 and FeO. The low S.K. value is caused by feldspars not weathered to clay minerals. The refinement of this thus has been required for the recent shortage of the resources of high-grade one. This paper concerns an optimum hydrothermal treatment condition to refine the low-grade weathered two-mica granite of which impurities are feldspar mineral and Fe2O3. FeO components in using for the main material of ceramic industry. And then, from this result, we tried to fine out the basic formation mechanism of clay mineral from feldspar etc and develope the effectual utilization method of this.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.845-850
• /
• 2008

Hydrated sodium silicate was synthesized by hydrothermal reaction using anhydrous sodium silicate. The optimum additions of water was 25wt% to make hydrated sodium silicate with homogeneous and purposed water contents. Porous ceramics with homogeneous microstructure and spherical closed pore can be fabricated by elimination of the large pores(a few mm in size) which was formed during first heat treatment through the decomposition of water. Spherical closed pore was formed above $600^{\circ}C$ and the pore size was increased with increasing second heat treatment temperature due to growth of pores. The size of spherical closed pore was varied from 35 to $233\;{\mu}m$ and specific gravity was varied from 0.2 to 1.02 depending on the combinations of the first and second heat treatment temperature.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.29-36
• /
• 2010

합성과 천연 에메랄드의 열처리에 따른 분광특성 변화를 가시광선과 적외선 분광분석으로 관찰하였다. X-선 형광분석 결과 flux 합성 에메랄드에서는 Mo과 Co이 검출 되었고, hydrothermal 합성 에메랄드에서는 Cl 성분이 나타났다. 자외선-가시광선 분광분석 결과는 콜롬비아산 에메랄드 시료에서 열처리 후에 전체적인 흡수 세기가 증가 한 것을 확인 하였다. 적외선 분광 분석 결과, hydrothermal 합성 에메랄드에서 Cl 성분에 관련된 피크가 $3000-2600cm^{-1}$에서 나타났고, 천연 에메랄드에서는 $CO_2$에 기인하는 $2358cm^{-1}$피크가 열처리후에 감소된 것을 확인하였다. 이는 열처리 후에 기체 성분이 변화된 것과 일치 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.656-659
• /
• 2005

Nanocrystalline ceria powders were prepared by hydrothermal treatment of cerium(IV) ammonium nitrate solution without a precipitating agent. A systematic investigation of the effect of hydrothermal temperature and react ion time on the physical properties of the product powders was carried out. When the hydrothermal temperature was increased, the product ceria powders exhibited larger crystallite size with higher yield. Increasing reaction time produced more crystalline ceria powders attributed to further hydrothermal reactions and structural rearrangement. The physical properties of ceria powders can be control led by adjusting the hydrothermal conditions.

• 한국결정성장학회지
• /
• 제16권6호
• /
• pp.240-243
• /
• 2006

본 연구에서는 수열법을 이용하여 저품질의 호주산 천연 사파이어에 대한 색상개선을 행하였다. 호주산 천연 사파이어의 색상 개선에 대한 최적의 수열처리 조건은 다음과 같다. 즉, 수열반응온도 $320{\sim}350^{\circ}C$, 반응시간: 3일, 수열용매: 2 M NaOH 수용액이다. 이와 같은 조건하에서 수열 처리한 후에 투명한 색상의 호주산 천연 사파이어가 얻어졌으며 천연 사파이어 가치 차트로 비교한 결과, commercial 등급이 $middle{\sim}top$ 등급으로 색상이 개선되었음을 확인하였다.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1401-1413
• /
• 1994

The synthesis of kaolinite mineral from domestic diatomite for silica resource, commercial vailable gibbsite or alumina for alumina resource were made under various hydrothermal treatment, and the sythetic effect of acidic mineralizers, temperature treatment with time duration, particle size of alumina on formation of kaolinite mineral and the plastic properties of synthesized kaolinite were investigated. The various acidic mineralizers which are HCl, HNO3, H2SO4 and Oxalic acid were employed for hydrothermal reaction in the range of 0.01 mol/ι to 2 mol/ι concentration of each mineralizers. It was found that HCl in the level of 1 mol/ι solution produced highly yields of well-crystallized and platy form kaolinite mineral and gave the most effective extraction of iron oxide, compared to that of others, that HNO3 produced highly yield of kaolinite but lower extraction of iron oxide, that H2SO4 produced low yield of kaolinite and formed alunite mineral, and that oxialic acid formed spherical crystalline kaolinite and gave low extraction of iron oxide. Moreover, it showed that kaolinite minerals were well synthesized in a wide range of less than 2 mol/ι acids, but were poorly synthesized at more than 2 mol/ι acids. However, boehmite and kaolinite were coexistently formed in the temperature range of 18$0^{\circ}C$ and 20$0^{\circ}C$ when the calcined diatomite and gibbsite were involved. The well-ordered kaolinite mineral as a platy form was highly synthesized in the temperature range of 220 and 24$0^{\circ}C$, when the same marterials as above were used with treatment of 1 mol/ι HCl solution. The results also revealed that the size of crystalline platy form kaolinite, synthesized from alumina and calcined diatomite with treatment in 1 mol/ιHCl solution at 24$0^{\circ}C$, was much larger than that of gibbsite and calcined diatomite shown previously, and that kaolinite and corundum minerals were coexistently formed under any hydrothermal treatment conditions. The plasticity of synthesized kaolinite from under 2 ${\mu}{\textrm}{m}$ alumina and calcined diatomite was very poor, and that of the synthesized kaolinite from raw diatomite and gibbsite gave higher than that of calcined diatomite and gibbsite.

• 유기물자원화
• /
• 제31권2호
• /
• pp.53-61
• /
• 2023

하수슬러지의 대부분은 생물학적 처리에 의한 미생물에 의해 분해 가능한 유기물질을 다량 함유하고 있는 유기성 폐기물이다. 기존의 하수슬러지 처리방법으로는 건조, 소각, 반탄화 그리고 탄화 등의 기술을 이용하여 감량화 및 연료화를 진행하고 있다. 그러나, 건조를 기반으로 하여 539kcal/kg의 잠열이 소비됨으로 에너지 소비가 높은 단점이 지적되고 있다. 따라서 본 연구에서는 열화학적 처리인 수열탄화(HTC)를 통해 고형연료를 생산하고자 한다. 고형연료의 가치를 평가하기 위하여 탄화도 및 연료비의 특성을 분석하였다. 그 결과 수열탄화 반응온도가 증가할수록 탄화도의 상승으로 저위발열량도 약 500kcal/kg 상승하였다. H/C, O/C, Ratio는 1.78, 0.46에서 1.57, 0.32로 감소하는 경향을 보였다. 건조슬러지의 가연분(고정탄소+휘발분) 대비 회분(Ash)의 비율이 0.25 이상으로 나타날 경우는 수열탄화를 진행하여도 탄화도 및 발열량의 증가되지 않는다는 것을 도출하였다.