• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.431-443
• /
• 2019

The present paper illustrates a numerical investigation on the failure behaviour of ring-stiffened cylinder subjected to external hydrostatic pressure. The published test data of steel welded ring-stiffened cylinder are surveyed and collected. Eight test models are chosen for the verification of the modelling and FE analyses procedures. The imperfection as the consequences of the fabrication processes, such as initial geometric deformation and residual stresses due to welding and cold forming, which reduced the ultimate strength, are simulated. The results show that the collapse pressure and failure mode predicted by the nonlinear FE analyses agree acceptably with the experimental results. In addition, the failure mode parameter obtained from the characteristic pressure such as interframe buckling pressure known as local buckling pressure, overall buckling pressure, and yield pressure are also examined through the collected data and shows a good correlation. A parametric study is then conducted to confirm the failure progression as the basic parameters such as the shell radius, thickness, overall length of the compartment, and stiffener spacing are varied.

• Composites Research
• /
• 제15권5호
• /
• pp.14-18
• /
• 2002

본 논문에서는 정수압 환경에서 파괴인성 측정을 위한 일인자방법의 적용성을 검토하기 위해 단일방향 및 준등방성으로 적층된 $\textrm{[}0^{\circ}\textrm{]}_{88}$$\textrm{[}0^{\circ}/\pm/45^{\circ}/90^{\circ}\textrm{]}_{11s}$의 탄소섬유/에폭시 적층복합재에 있어 네 단계 정수압에 대해 탄성일인자를 층간 분리 길이의 함수로 결정 정수압 및 적층각이 탄성일인자에 미치는 영향을 검토하였다. $\textrm{[}0^{\circ}\textrm{]}_{88}$ 경우에는 0.1 MPa, 70MPa, 140MPa, 200MPa의 정수압력을 적용하였으며 $\textrm{[}0^{\circ}/\pm/45^{\circ}/90^{\circ}\textrm{]}_{11s}$에서는 0.1MPa, 100MPa, 200MPa, 300MPa의 정수압력을 적용하였다. 결과로서 탄성일인자는 정수압 및 두 경우 적층각에 의해 영향을 받지 않음을 알 수 있었다. 또한 탄성일인자는 층간분리가 증가함에 따라 선형적으로 감소함을 알 수 있었다.

• 한국식품영양과학회지
• /
• 제43권10호
• /
• pp.1619-1626
• /
• 2014

마리네이드, 간장소스, 된장소스 및 고추장소스를 대상으로 총균수 및 Bacillus cereus 접종포자에 대해 초고압, 줄가열, 항균물질에 단독처리나 hurdle 복합처리에 의한 저감효과를 분석하였다. 줄가열 처리는 된장 및 고추장소스의 총균과 접종포자에 대해서 1.0~2.0 log 범위의 저감효과를 나타내었다. 한편 J($85^{\circ}C$), A(EtOH 3.0%) 및 P(550 Mpa, 5분)를 허들로 설정하였을 경우 된장소스의 총균수는 JA 처리구가 0.35 log, JP 처리구가 0.92 log 및 JAP 처리구가 1.21 log 감소하였고, 고추장소스의 총균수는 JA 처리구가 1.26 log, JP 처리구가 1.7 log 및 JAP 처리구가 1.47 log 감소하였다. 포자의 경우 된장소스는 AP 처리구가 0.50 log, JP와 JAP 처리구는 각각 1.42 log 및 1.38 log로 감소 효과가 증가하였고, 고추장소스는 AP 처리구가 0.47 log, JA 처리구가 3.3 log, JP와 JAP 처리구가 모두 3.45 log만큼 크게 감소하였다. 상기 소스의 총균과 포자에 대한 처리구는 $30^{\circ}C$에서 8주간 저장 시 대조구 대비 유사하거나 낮은 수준을 유지하였다. 따라서 소스류 중에서 고추장소스와 된장소스는 줄가열과 초고압을 연계한 허들처리를 통해 총균수와 B. cereus 포자를 제어할 수 있을 것으로 기대된다.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1102-1105
• /
• 2008

The structural change and leakage of cellular substances of Saccharomyces cerevisiae attributed by high hydrostatic pressure (HHP) treatment were observed with scanning electron microscopy (SEM). S. cerevisiae (ATCC16664) was inoculated in apple juice for 10 min at $23^{\circ}C$ and the apple juice treated at 138, 207, 276, 345, and 414 MPa pressure for 30 sec at $23^{\circ}C$. Increased of roughness, elongation, wrinkling, and pores on yeast cell surfaces, the yeast cell walls were severely damaged by HHP treatment from 276 to 414 MPa. Inactivation of S. cerevisiae by HHP is dependent on structural changes on the cell walls observed with SEM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.191-191
• /
• 2003

It is well-known that the mechanical behavior of fiber-reinforced composites under hydrostatic pressure environment is different from that of atmospheric pressure environment. It is also known that the mechanical behavior of fiber-reinforced composites is affected by strain rate. In this work, we investigated the effect of strain rate on the compressional elastic modulus and fracture stress of fiber-reinforced composites under hydrostatic pressure environment. The material used in the compressional test was unidirectional carbon/epoxy composites and the hydrostatic pressures applied was 250 MPa. Compressional tests were performed applying various strain rates of 0.05 %/sec, 0.25 %/sec, 0.45 %/sec, and 0.75 %/sec. The results showed that the elastic modulus increased with increasing strain rate while the fracture stress was little affected by the strain rate.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.139-143
• /
• 2001

Ring-stiffened cylinders are widely used as the pressure hull of submarines and underwater vehicles. For large ring-stiffened cylinders cylindrical shells are fbricated by cold rolling of flat plates and then welding of curved shells. After forming cylinders ring-stiffeners are welded on th the cylinders. Due to these cold roiling and welding initial shape imperfections and residual stresses exists in fabricated ring-stiffened cylinders. It is well known that the initial shape and material imperfections affect the ultimate strength of ring-stiffened cylinders significantly. In this paper previous researches on the effects of initial shape imperfections and residual stresses are briefly reviewed Recently a numerical analysis computer program was developed to predict the ultimate strength of ring-stiffened cylinders subjected to hydrostatic pressure, which is based on the Dynamic Relaxation technique. This program was employed to numerically investigate those effects. The numerical predictions were substantiated with relevant experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.116-120
• /
• 2001

In swash plate type axial piston hydraulic pump and motor, the piston shoe is periodically pressurized with square function shape by supply pressure load as rotation of cylinder barrel. Therefore the recess pressure on bottom part of piston shoe is suddenly increase through orifice in the piston shoe. In this study, we simulated that the frequency response of the recess pressure against with change of supply pressure with analysis tool. Also, we evaluate the dynamic response characteristics of overbalanced hydrostatic bearing with change of the orifice diameter.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권3호
• /
• pp.116-121
• /
• 2005

본 연구에서는 자유표면을 갖는 대규모의 환경유동의 해를 구하는데 있어 비정수압의 효과를 고려하는 새로운 계산 기법을 제시하였다. Sigma 좌표계에서 시간은 전진차분으로, 공간은 중간차분 및 풍상차분을 혼합하여 2단계 해법을 도입하였다. 계산기법의 타당성과 유효성을 검증하기 위하여, 자유표면을 갖는 정상유동과 비정상유동에 대한 전형적인 예를 설정하여 정수압 계산과 비정수압 계산을 수행하고 이들을 비교하였다. 계산결과 복잡한 해저지형을 갖는 자유표면 유동에 있어, 지정수압효과가 무시할 수 없는 유동영역이 존재함이 입증되었으며, MAC기법과 같은 3차원 유체동역학적 기법을 적용하기에는 비경제적인 문제에 대해 본 계산기법이 매우 유효하게 적용될 수 있다는 가능성이 입증되었다.

• 유공압시스템학회논문집
• /
• 제4권3호
• /
• pp.1-6
• /
• 2007

The leakage generated from the clearance between the cylinder bore and the piston is one of the most serious problems in the hydraulic piston pump, and it even results in terrible decrease of the volume efficiency at a great velocity and high pressure. In this paper, the lubrication characteristic of the hydrostatic slipper bearing equipped in the hydraulic piston pump has been worked out by experimentation with three model bearings of different shape. Preparatory to this, not only the three models of piston-slipper were designed, but the corresponding experimental apparatus were also manufactured. As a result, it was verified that, according to the supply pressure, the hydrostatic bearing part of the slipper is severely affected by the pocket pressure, land pressure, oil film thickness, and leakage flow.

• 한국수산과학회지
• /
• 제39권2호
• /
• pp.94-99
• /
• 2006

The tadpole larvae of most ascidians have two sensory pigment cells in their brain vesicle. The anterior otolith pigment cell is sensitive to gravity, whereas the posterior ocellus pigment cell responds to light. Besides these two sensory cells, the larvae also possess another type of sensory receptor cell: hydrostatic pressure receptor (Hpr) cells. The Hpr cells have been presumed to sense hydrostatic water pressure, although no functional analysis has been performed. In larvae of the ascidian Halocynthia reretzi, the development of the Hpr cells and their structure in the brain vesicle are poorly understood. To investigate the morphology and formation of the Hpr cells, we established a monoclonal antibody, Hpr-1, that specifically recognizes Hpr cells. The Hpr-1 antigens became detectable in the brain vesicle at the late tailbud stage. Each Hpr cell projected a small globular body, connected by a short stalk, into the lumen of the brain vesicle. The brain vesicle showed remarkable left-right asymmetry. Pigment cells were located on the right side in the lumen of the brain vesicle, whereas Hpr cells were present in the left side. After metamorphosis, the Hpr cells were observed near the rudimental siphons of the juvenile.