• 한국물환경학회지
• /
• 제24권1호
• /
• pp.123-128
• /
• 2008

The Dissolved Organic Carbon (DOC) existing in a water includes both hydrophobic and hydrophilic substances however, most of the discussion focuses on hydrophobic substances. The hydrophobic fraction was easily removed by absorption or coagulation more than hydrophilic fraction. Therefore, control of the hydrophilic fraction is very important in water treatment process. This study is to determine the variation of DOC, the removal efficiency of DOC, and Trihalomethane formation potential (THMFP) after each stage of water treatment process by fractionating Natural Organic Matters (NOM) into hydrophobic and hydrophilic substance. DOC from raw water was fractionated at acidic pH (pH<2) using XAD 8 resin column, into two fraction : hydrophobic substance (i.e. humic substance) adsorbed on XAD 8 and hydrophilic substance which represent the organics contained in the final effluent. THMFP was carried out according to the following set condition: Cl2/DOC=4 mg/mg, incubation at $25^{\circ}C$ in darkness, pH 7 adjust with HCl or NaOH as necessary, and 72hour-contact time. THMs analyzed in this study were chloroform, bromodichloromethane, dibromochloromethan, and bromoform. Sewage was almost evenly split between the hydrophobic (56%) and hydrophilic fraction (44%). But, Aldrich humic substance (AHS) was found to contain less hydrophilics (14%) than hydrophobics (86%). The formation of THMs may depend on the source which is characterized by the composition of organic matters such as AHS and sewage. The THMFP yield of sewage and AHS were assessed as follows. The value of the THMFP reaction yield, AHS $172.65{\mu}g/mg$, is much higher than that of sewage $41.68{\mu}g/mg$. This illustrates possible significant difference in THMFP according to the component type and the proportion of organic matter existing in water source. Apparently AHS react with chlorine to produce more THMFP than do the smaller molecules found in sewage. Water treatment process may reduce THMFP, nevertheless residual DOC (the more hydrophilic substance) has significant THMFP. Further reduction in organic halide precursors requires application of alternative treatment techniques.

• 분석과학
• /
• 제30권2호
• /
• pp.89-95
• /
• 2017

The thermodynamic functions for the binding of the peptide Substance P (SP) on the surface of lipid vesicles made of various types of lipids were obtained by using isothermal titration calorimetry. The reaction enthalpies measured from the experiments were -0.11 to $-4.5kcal\;mol^{-1}$. The sizes of the lipid vesicles were measured with dynamic light scattering instrument in order to get the correlation between the reaction enthalpies and the vesicle sizes. The bindings of SP on the lipid vesicles with diameter of 37 to 108 nm were classified into the enthalpy-driven reaction or the entropy-driven reaction according to the size of the lipid vesicles. For the enthalpy-driven binding reaction, the significance of the electrostatic interactions between SP and lipid molecules was affirmed from the experimental results of the DMPC/DMPG/DMPH and DMPC/DMPS/DMPH vesicles as well as the importance of the hydrophobic interactions between hydrophobic groups of SP and lipid molecules.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.743-748
• /
• 2013

The temperature dependence of the partition coefficients of a neuropeptide, substance P (SP), in isotropic acidic bicelles was investigated by using a pulsed field gradient nuclear magnetic resonance diffusion technique. The addition of negatively charged dimyristoylphosphatidylserine to the neutral bicelle changed the SP partitioning a little, which implies that the hydrophobic interaction between the hydrophobic residues of SP and the acyl chains of lipid molecules is the major interaction while the electrostatic interaction is minor in SP binding in a lipid membrane. From the temperature dependence of the partition coefficients, thermodynamic functions were calculated. The partitioning of SP into the acidic bicelles is enthalpy-driven, as it is for small unilamellar vesicles and dodecylphosphocholine micelles, while peptide partitioning into a large unilamellar vesicle is entropy-driven. This may mean that the size of lipid membranes is a more important factor for peptide binding than the surface curvature and surface charge density.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.1-7
• /
• 2001

The immediate purposes of this study is to establish the surface chemical principles associated with the flotation process of waste papers and to verify them by practical flotation experiments. To achieve this AKD sized hydrophobic microcrystallince cellulose (MCC) with different levels of hydrophobicity, and hydrophilic MCC dyed with black were prepared as model substances. The effects of surface characteristics on flotation efficiency were evaluated by measuing the brightness of the flotation rejects obtained after the flotation experiments carried out using MCC mixtures prepared with different ratios of hydrophobic and hydrophilic MCCs. Results showed that more than 90% of the flotation rejects consisted of hydrophobic MCC indicating the critical importance of the hydrophobicity of the materials in the flotation process. The proportions of hydrophobic materials in the reject remained constant when highly sized MCC was used as a model of hydrophobic substance.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.40-46
• /
• 2015

For some Korean newsprint mill, addition level of aluminum sulfate has been reduced because sulfur from aluminum sulfate has detrimental effect on the efficiency of anaerobic water treatment. At this moment, an unexpected decrease in sizing degree of TMP mixed newspaper was occurred. The phenomena means that hydrophobic substance usually originated from TMP cannot be fixed on the paper. This study focused on effect of alum and PAC on sizing of paper and contamination. Also, substitutability of PAC was discussed as a possible alternatives of aluminum sulfate under anaerobic condition of water treatment. Evaluation of sizing degree and pitch deposit potential were performed at the varied addition level of PAC and aluminum sulfate. Hydrophobic substance mainly derived from TMP could be fixed on the surface of fiber by PAC. Fines retention was not changed by replacing aluminum sulfate with PAC. Additionally, fixing of hydrophobic substance without excessive agglomeration can be enhanced by PAC with low molecular weight. Consequently, sizing degree of newspaper and contamination of recycling process of ONP can be controlled by low molecular weighted PAC.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.256-256
• /
• 2011

Using plasmas, hydrophobic surfaces are made on various substances such as polyimide films, filter paper, cotton clothes and multi-walled carbon nanotube (MWCNT) with hexamethyldisiloxane (HMDSO), trimethylchlorosilane (TMCS) and toluene reagents. Plasmas are easily and rapidly to change surface of hydrophilic materials into hydrophobic. We have also optimized processing time and maximized contact angle for super-hydrophobicity of MWCNT. Contact angles have been calculated by measuring between substance and probe liquid, and total surface free energies are determined by the Owens-Wendt equation. Figure 1 shows the measured contact angles with time and ratio of reagents on MWCNT.

• 한국자기공명학회논문지
• /
• 제2권1호
• /
• pp.41-49
• /
• 1998

A linear undecapeptide, Substance P (SP) is involved in a wide variety of physiological processes such as pain, inflammation, salivation, and hypertension. Tertiary structure of SP in dodecylphosphocholine (DPC) micelles has been investigated by CD, NMR spectroscopy, and DGII calculation. CD spectrum of SP in the presence of 7.5 mM DPC micelles does not show any favorable secondary structure. The tertiary structure determined by NMR spectroscopy and DGII calculation shows that the Phe7-Phr8-Gly9-Leu10 region adopts a turn structure, while the N-terminal region is quite flexible. Both prolines in SP exist preferentially as the trans isoforms and the aromatic ring of Phe7 protrudes outward. Conformation of SP may be restrained by the contact of the Phe7 aromatic ring with the hydrophobic side chains of the DPC micelles and this interaction induces a turn structure. Structure of SP in aqueous solution in the presence of DPC micelles can represent a good model to study the conformation recognized by the receptor near neutral membrane.

• 한국응용과학기술학회지
• /
• 제37권2호
• /
• pp.250-259
• /
• 2020

가용화현상에 있어서 유기물(피가용화물)과 계면활성제와의 상호관계를 조사하고자 UV-Vis 법을 이용하여 가용화상수(K_s)값을 구하였다. 유기물의 para-위치에 알킬치환기가 도입된 4-alkylanilines과 양이온계면활제인 소수기 길이가 서로 다른 DTAB, TTAB, CTAB를 이용하여 유기물과 계면활성제간의 소수성 상호작용에 따른 가용화 상수값과 그에 따른 열역학함수들을 다양한 온도에서 구하여 서로 비교하였다. 그 결과 유기물에서 알킬치환기에 의한 소수성효과는 탄소사슬의 길이가 증가할수록 일정한 비율로 증가하였고, 또한 계면활성제에서 소수기의 길이효과도 일정한 비율로 증가하였다. 그런데 이러한 소수성 효과는 유기물에서 알킬치환기에 의한 효과가 계면활성제에서 소수기의 효과 보다 더 크게 나타났다. 또한 계산된 열역학 함수값들의 결과들로부터 유기물의 소수성이 증가할수록 그리고 계면활성제의 소수성이 증가할수록 유기물은 미셀내부의 더 깊은 곳으로 가용화됨을 알 수 있었다. 등구조온도는 실험 조건 범위 내에서 큰 차이를 보이지 않았으며, 최대값과 최소값의 차이가 1K미만으로 차이가 거의 없는 것으로 나타났다.

• 대한환경공학회지
• /
• 제27권8호
• /
• pp.799-806
• /
• 2005

응집-UF 정수공정시 응집 전처리 공정에 있어 완속혼합없이 급속혼화만으로 충분한 응집의 효과를 기대할 수 있으며, 급속혼화장치로 in-line static mixer를 사용한 경우가 기존의 back mixer를 사용 한 경우보다 롤은 DOC 제거효율을 얻을 수 있었다. 또한, 적정 주입량인 16 mg alum/L에서 막의 투과 flux 감소가 가장 적게 나타났으며 적정 주입량보다 너무 적거나 또는 너무 많은 경우 모두 막의 투과 fiux 감소가 크게 나타났다. 또한 막의 fouling에 크게 영향을 미치는 것은 hydrophobic 물질로 이는 응집 전처리시 효과적으로 제거되어짐으로써 막의 투과 flux 감소를 줄일 수 있었다.

• 한국응용과학기술학회지
• /
• 제34권1호
• /
• pp.116-124
• /
• 2017

색조 화장품 원료로 사용되는 무기안료 탈크와 소수성 실리카의 제타전위 차를 조절하여 표면처리된 판상 무기안료 복합체를 제조하였다. 탈크는 색조 화장품의 처방에서 주로 쓰이는 판상 무기물질로서 피부에 대한 발림성과 퍼짐성을 갖는 백색 안료이다. 또한 분산성과 신장성이 우수하며, 내열성, 내광성, 내화학성 등에 안정하다. 실리카는 일반적인 색조화장품에서 화장의 지속성을 높여주며 제형에서의 안정성을 높여주는 역할을 한다. 본 연구에서는 탈크와 소수성 실리카를 각각 양이온성, 음이온성 계면활성제로 표면전하를 조절한 후 제타전위 차를 이용하여 탈크 표면에 소수성 실리카를 표면처리하여 무기안료 복합체를 제조하였다. 제조된 무기안료 복합체는 소수성 실리카가 탈크 표면 위에 $1{\mu}m$ 이하로 코팅되어 있으며 효과적인 소수성을 띤다. 무기안료의 표면전하 분석을 위해 제타전위를 측정하였고, 계면활성제 표면처리된 안료는 FT-IR 로 계면활성제의 작용기를 확인하였다. 무기안료 복합체의 표면은 SEM, EDS, FIB 등으로 관찰하였으며, XRD, FT-IR 등으로 구조를 확인하였다.