• Journal of Microbiology and Biotechnology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 1997

Two commercially available lipases, Lipase OF (non-specific lipase from Candida rugosa) and Lipolase 100T (1, 3-specific lipase from Aspergillus niger), were immobilized on insoluble hydrophobic support HDPE (high density polyethylene) by the physical adsorption method. Hydrolysis performance was enhanced by mixing a non-specific Lipase OF and a 1, 3-specific Lipolase 100T at a 2 : 1 ratio. The results also showed that the immobilized lipase maintained its activity at broader temperature ($25~55^{\circ}C$) and pH (4-8) ranges than soluble lipases. In the presence of organic solvent (isooctane), the immobilized lipase retained most of its activity in upto 12 runs of hydrolysis experiment. However, without organic solvent in the reaction mixture, the immobilized lipase maintained most of its activity even after 20 runs of hydrolysis experiment.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.5
• /
• pp.291-293
• /
• 2003

Batch reactors were employed to investigate the kinetics of cellulose hydrolysis under extremely low acid (ELA) and high temperature condition. The sawdust was pretreated by Auto-hydrolysis prior to the batch reaction. The maximum yield of glucose obtained from the batch reactor experiment was about 70% for the pretreated sawdust, this occurred at 210 and 22$0^{\circ}C$. The maximum glucose yield from the untreated sawdust was much lower at these temperatures, about 55%. The maximum yields of glucose from the lignocellulosics were obtained between 15th and 20th minutes after which gradual decrease was observed.

• KSBB Journal
• /
• v.6 no.2
• /
• pp.157-166
• /
• 1991

The structural properties of cellulose are significantly changed with the progress of hydrolysis reaction. The effects of changes on such properties of cellulosic substrate as crystallinity, amicessibility of enzyme to the active site of cellulose surface, and particle size on the kinetics of enzymatic hydrolysis have been studied. Among those physical studies, the apparent surface active site of cellulose particle was found to have the most significant effect on the hydrolysis kinetics. Based on the experimental results, the adsorption affinity of enzyme and hydrolysis rate were mainly influenced by the surface roughness of cellulose particle. The extent of accesssible active site may be expressed as the change of particle diameter. The Langmuir isotherm was proposed in terms of enzyme activity to explain the actual action of enzyme protein.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.157-160
• /
• 1988

The rates of hydrolysis of N-(benzenesulfonyl) benzimidoyl chlorides (p-H, $p-CH_3,\;p-CH_3,\;p-NO_2\;and m-NO_2$) have been measured by UV spectrometry in 60% methanol-water at $25^{\circ}C$ and a rate equation which can be applied over wide pH range was obtained. Below pH 7.00, the substituent effect on the hydrolysis rate of N-(benzenesulfonyl) benzimidoyl chloride was found to conform to the Hammett ${\sigma}$ constant with ${\rho}$ = -0.91, whereas above pH 9.00, with ${\rho}$ = 0.94. On the basis of the rate equation obtained and the effect of solvent, substituents and salt, the following reaction mechanism were proposed; below pH 7.00, the hydrolysis of N-(benzenesulfonyl) benzimidoyl chloride proceeds by $S_N1$ mechanism, however, above pH 9.00, the hydrolysis is initiated by the attack of the hydroxide ion and in the range of pH 7.00-9.00, these two reactions occur competitively.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.188-191
• /
• 1993

The reaction between methyl 2,3-di-O-benzyl-4,6-di-O-mesyl-${\alpha}$-D-glucopyranoside (1b) and potassium superoxide resulted in hydrolysis, and gave methyl 2,3-di-O-benzyl-${\alpha}$-D-glucopyranoside (1) as a sole product. When the reaction was performed with a vicinal dimesylate, methyl 4,6-O-benzylidene-2,3-di-O-mesyl-${\alpha}$-D-altropyranoside (4b), again the hydrolysis product, methyl 4,6-O-benzylidene-${\alpha}$-D-altropyranoside (4) was obtained. However, the reaction of potassium superoxide with another vicinal dimesylate, methyl 4,6-O-benzylidene-2,3-di-O-mesyl-${\alpha}$-D-glucopyranoside (3b), nucleophilic displacement took place to afford methyl 4,6-O-benzylidene-${\alpha}$-D-altropyranoside (4). Apparently different results from two trans vicinal dimesylates, 3b and 4b are explained by the transient formation of epoxides, methyl 2,3-anhydro-4,6-O-benzylidene-${\alpha}$-D-allopyranoside (8) and methyl 2,3-anhydro-4,6-O-benzylidene-${\alpha}$-D-mannopyranoside (9) by $KO_2$. The reaction between the allo epoxide 8 and $KO_2$ gave altro 4. The manno epoxide 9 also afforded altro 4 as the major product. Facile epoxide formation by the reaction of a vicinal dimesylate and superoxide was also observed with 3-O-benzyl-1,2-O-isopropylidene-5,6-di-O-mesyl-${\alpha}$-D-glucofuranose: 5,6-anhydro-3-O-benzyl-1,2-O-isopropylidene-${\beta}$-L-idofuranose was obtained.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.5
• /
• pp.672-679
• /
• 2022

Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50℃ and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.525.2-525
• /
• 1986

Cephalexin synthesizing enzyme (${\alpha}$ amino acid ester hydrolase) was partially purified from the culture broth of Acetobacter turbidans ATCC9325 through ammonium sulfate fractionation, DEAE, CM, and Sephacryl S-200 gel filtration. The enzyme has optimum pH 6.0 and temperature, 40$^{\circ}C$ respectively. From the analysis of reaction mixtures by thin layer chromatographic and high performance liquid chromatographic techniques, it was confirmed this enzyme catalyzed simultaneously the following reactions : 1) Synthesis of cephalexin from D-${\alpha}$-phenylglycine methylester (PGM) and 7-amino 3-deacetoxy-cetoxycephalosporanic acid (7-ADCA) 2) Hydrolysis of cephalexin to form 7-ADCA and phenylglycine (PG) 3) Hydrolysis of PGM to form PG and methanol. Base on the above experimental observations, the reaction model of this enzyme was identical with that of the enzyme from Xanthomonas citri.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.670-673
• /
• 2002

Powder synthesis using the alkoxy precursor technique exhibits processing flexibility not available in traditional high temperature solid-state reaction. With proper process control, impurities can be reduced to very low levels. The major distinction of the present work lies in the method of accomplishing the hydrolysis reaction. In the present case, water is not added to the system. Instead the metal alkoxide/alcohol solution is heated to a temperature at which water is formed through dehydration of the alcohol solvent, causing precipitation of the corresponding metal oxide (hydroxide). The present method provides a means of producing amorphous alumina.

• YAKHAK HOEJI
• /
• v.36 no.1
• /
• pp.12-16
• /
• 1992

A new method for the synthesis of alminoprofen, which is a non-steroidal antiinflammatory agent, was described. Ethyl 2-phenyl-propionate(4) was prepared by Friedel-Crafts reaction of benzene with ethyl ${\alpha}-chloro-{\alpha}(methylthio)acetate(1)$, followed by methylation and desulfurization of the resultant ethyl 2-(methylthio)phenylacetate(2). Ethyl 2-(p-aminophenyl)propionate(6) was obtained by nitration of (4) and successive reduction of ethyl 2-(p-nitrophenyl)propionate(5). Alminoprofen was synthesized by reaction of (6) with methallyl chloride, followed by hydrolysis of the resultant ethyl 2-(p-methylallylaminophenyl)propionate (7).

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.75-82
• /
• 1969

4-Ethyltropolone has been prepared in three steps from cyclopentadiene by a dichloroketene process, and at the same time, a comparison has also been made with the case of tropolone synthesis. In the addition reaction of dichloroketene to cyclopentadiene as well as to ethylcyclopentadiene, and also in the separation of cycloadducts from reaction mixture, the best results were given by prevention of the reactants from dimerization. Under these condition, the yields of cycloadducts were around 70% for both. Tropolone and 4-ethyltropolone were obtained in the yield of 51% and 32%, respectively, by hydrolysis of cycloadducts with potassium acetate in aqueous acetic acid. These results revealed that the steric effect of ethylgroup was more sensitive to the hydrolysis than to the cycloaddition reaction. A comparison of UV, IR and NMR spectroscopic results of 4-ethyltropolone with those of tropolone was also made together with a brief discussion of the tropolone ring system and ethylgroup effect.