• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.304-307
• /
• 2005

The acid-catalyzed hydrolysis reaction of poly(vinyl acetate) (PVAc) in water/acetic acid solution at $35^{circ}C$ was studied at two different solvent compositions. The mole fractions of vinyl acetate (Vac) and vinyl alcohol (VA) during the course of the reaction were determined by NMR, and the equilibrium constant $K_{eq}$ of the reaction was determined using the molar ratio of VAc to VA at the chemical equilibrium. $K_{eq}$ was 0.75 (${\pm}0.01$) when the VAc mole faction at the equilibrium was 0.78 (${\pm}0.01$) and it was 0.69 (${\pm}0.01$) when the VAc mole fraction was 0.57 (${\pm}$0.02). The reaction was found to be a pseudo 1-st order reaction with the rate coefficient at $3.4{\times}10^{-6}/sec$.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.394-398
• /
• 2012

Astragalin (AS), kaempferol monoglycoside, is classified as a polyphenol, and a minute quantity of AS is known to be present in several plants. Recently, it was reported that AS can be prepared by the partial hydrolysis of camelliaside A (CamA) and camelliaside B (CamB) in the tea seed extract (TSE) in the presence of a commercial enzyme complex such as Mash. In this paper, the effects of reaction temperature, amount of enzyme, and the substrate concentration on the reactivity were investigated. As the reaction temperature or the amount of enzyme increased, the reaction rate to produce AS increased, however, the hydrolysis of AS into KR was also enhanced. As a conclusion, the reaction, when 2 mL of Mash to 1 g of TSE was applied with a substrate concentration of 15% at $50^{\circ}C$, was found to be optimum, based on the reaction rate and the selectivity to AS.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.33-43
• /
• 1994

In the present work, to clarify the mechanism of the neutral salt effect on the alkaline hydrolysis of PET, many salts with different cations like LiCl, NaCl, KCl, CsCl were added to the aqueous alkaline solutions. Then PET was hydrolyzed with aqueous solutions of many salts in alkali metal hydroxides under various conditions. Some conclusions obtained from the experimental results were summarized as follows. The reaction rate of the alkaline hydrolysis of PET was increased by the addition of neutral salts and In k was increased nearly linearly with the square root of ionic strength of reaction medium. This fact suggested that the ionic strength effect by Debye-Huckel and Bronsted theory was exerted on the reaction. The specific salt effect was also observed. The reaction rate was increased with the increase in the electrophilicity of cations of neutral salts, i. e., in the order of $Cs^+$/ < $K^+$/ $a^+$/ $i^$^+$. It was considered that the reaction rate was increased in the order of C $s^+$. < $K^+$. $a^+$. $i^+$. because the lowering effect of the cations on the negative charge of PET surface was increased with the electrophilicity of cations. It was thought that $E_{a}$ was increased because the cations of neutral salts decreased the negative charge of PET surface. It, however, was inferred from the increase in ${\Delta}$S＊ and the decrease in the ${\Delta}$G＊ that the cations of neutral salts associated with PET increased the collision frequency between carbonyl carbon and OH- ion and then accelerated the reaction rate.te.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.172-177
• /
• 2007

The hydrolysis reaction of sarin(GB), one of the nerve agents was studied in aqueous sodium hydroxide(NaOH) solutions to find the experimental conditions which can convert GB into the less toxic compounds. 10 wt% of GB was added into the aqueous NaOH(2.05 eq) in a small-scale jacket-attached reactor connected to a circulator. The reaction rate constants were measured at three temperatures(50, 70 and $90^{\circ}C$) and the reaction times required to degrade the material to > 99% were calculated at different temperatures. In this study, 10 wt% of GB was degraded to 99.99% in 1.2hr at $90^{\circ}C$ by the aqueous NaOH solution. The major hydrolysate of GB was isopropyl methylphosphonate.

• YAKHAK HOEJI
• /
• v.34 no.6
• /
• pp.415-421
• /
• 1990

The effects of temperature, pH, light and concentration on the degradation of trimebutine maleate in aqueous solution were investigated on the basis of accelerated stability analysis, and the stabilization of the solution was attempted by addition of several additives. The decomposition of trimebutine maleate in solution followed first-order reaction the was not only accelerated by temperature elevation but also the lower the concentratin the more speeded up the reaction. The decomposition mechanism of trimebtine could be confirmed by hydrolysis of ester bond in the structure. It was assumed trimebutine maleate is so photosensitive that the solution of the drug underwent accelerated decomposition under UV rays. What is more, the degradation of trimebutine solution was supposed to catalyzed by specific acid-base catalysis considered the pH dependence for the hydrolysis of ester, and the solution was most stable over the range of pH 2-2.8 in solution. The additives, citric acid, asparitc acid and glutamic acid, inhibited considerably the decomposition of the drug solution, and these additives might be used as stabilizers in trimebutine maleate solution.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.608-614
• /
• 2003

Well developed hydroxyapatite whiskers (length 5 ${\mu}{\textrm}{m}$, diameter 0.5 ${\mu}{\textrm}{m}$) have been synthesized by the hydrolysis reaction of $\alpha$-tricalcium phosphate ($\alpha$-Ca$_3$(PO$_4$)$_2$) under pH 9.1 at 9$0^{\circ}C$ for 6 h. The effect of reaction conditions (temperature, time, pH) on the conversion of $\alpha$-tricalcium phosphate to hydroxyapatite was examined. In addition, the hydroryapatite was characterized in terms of microstructure, composition and thermal stability using XRD, SEM, ICP, and TGA instruments.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.199-204
• /
• 2015

Response surface methodology (RSM) in combination with a 17-run central composite design (CCD) was applied to optimize the non-catalytic hydrolysis of lard using subcritical water to produce fatty acids (FA). The effects of three variables including temperature, molar ratio of water to oil and time, and their relationship on FA content were investigated. A quadratic regression model was employed to predict the FA contents. Optimum reaction conditions for maximizing the FA content were obtained as follows: reaction temperature of $288.5^{\circ}C$, molar ratio of water to oil of 39.5 and reaction time of 29.5 min. Under the optimum conditions, the predicted and experimentally obtained FA contents were 97.06% and 96.99%, respectively.

• Journal of the Korean Ceramic Society
• /
• v.32 no.7
• /
• pp.783-792
• /
• 1995

Sol-Gel derived ferroelectric PZT thin films were fabricated on ITO/Glass and Si/SiO2 substrates. In order to investigate the effect of catalysts on the densification and crystallization of PZT thin films, a nitric acid or ammonium hydroxide was added to the PZT stock solution at the state of partial hydrolysis reaction. The measured pH for a stable PZT sol was 5.2~9.3. In case of an acid-catalyzed PZT sol, a highly condensed particulate PZT sol was formed by accelerating the hydrolysis reaction. But weakly branched polymeric PZT sol was formed with a base-catalyzed condition. The difference in densification behavior was not found in the pH range of added catalyst, but the refractive index of PZT thin film was increased rapidly as the annealing temperature increased. The PZT thin film annealed at 54$0^{\circ}C$ for 10 min was fully densified and its refractive index was above 2.4. When the annealing temperature increased, the transition from the pyrochlore phase to perovskite appeared at 54$0^{\circ}C$. The base-catalyzed PZT thin film suppressed to form the pyrochlore phase and proceeded effectively to convert the perovskite phase. This was due to the formation of polymeric molecular structure by controlling the hydrolysis and condensation reaction through the additiion of the ammonium hydroxide.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.630-634
• /
• 2000

Chiral epoxides are useful chiral synthons in organic synthesis, and various biological methods have been investigated for their production. In this work, the enantioselective resolution of racemic styrene oxide was investigated using Aspergillus niger sp. for the production of optically pure (S)-styrene oxide. The enantioselectivity and initial hydrolysis rates of the racemic substrate were highly dependent of the pH, temperature, and the volume ratio of cosolvent. Experimental sets of pH, temperature, and the volume ratio of cosolvent were investigated using a central composite experimental design, and reaction conditions were optimized by response surface analysis. The optimal conditions of pH, temperature, and the volume ratio of cosolvent were determined to be 7.78, $28.32^{\circ}C$, and 2.4%(v/v), respectively, and optically pure (S)-styrene oxide (>99% ee) was obtained at 35% yield using this microbial enantioselective hydrolysis reaction.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.347-351
• /
• 2011

In this study, we investigated the effect of reaction factors on enzymatic hydrolysis of Hizikia fusiforme, which is brown algae in marine biomass resource, using commercial enzymes. The composition of H. fusiforme is 38.9% of reducing sugar, 4.8% of moisture, 17.8% of ash, and 38.5% of others. In the condition of 1-5% substrate, the increase of substrate concentration enhanced the increase of reducing sugar formation; however, the hydrolysis yield did not increase after 24 h. After reaction of 75 h, conversion yield of reducing sugar were obtained to 16.45%, 17.99%, and 14.55% at 1, 2.5, and 5% substrate, respectively. As a result of effect of enzyme amount, the formation of reducing sugar did not show considerable change at 1% substrate. However, in the condition of 2.5% substrate, the great change of reducing sugar formation was observed by the increase of enzyme amount. The conversion yields of reducing sugar were obtained to 18.77% and 22.83% at 1% and 2.5% substrate with 30% enzyme, respectively. As a result of heat treatment of biomass, the high yield was obtained in 2.5% substrate and the yields were increased to 0.06-7.2% by the heat treatment. This result will provide the basic information for production process of biofuels and chemicals from marine biomass H. fusiforme.