• Proceedings of the Korea Water Resources Association Conference
• /
• 2001.05a
• /
• pp.25-34
• /
• 2001

A grid-based KIneMatic wave soil-water EROsion and deposition Model (KIMEROM) that predicts temporal variation and spatial distribution of sediment transport in a watershed was developed. This model uses ASCII-formatted map data supported from the regular gridded map of GRASS (U.S. Army CERL, 1993)-GIS (Geographic Information Systems), and generates the distributed results by ASCIIl-formatted map data. For hydrologic process, the kinematic wave equation and Darcy equation were used to simulate surface and subsurface flow, respectively (Kim, 1798; Kim et al., 1993). For soil erosion process, the physically-based soil erosion concept by Rose and Hairsine (1988) was used to simulate soil-water erosion and deposition. The model adopts sing1e overland flowpath algorithm and simulates surface and subsurface water depth, and sediment concentration at each grid element (or a given time increment. The model was tested to a 162.3 km$^2$ watershed located in the tideland reclaimed area of South Korea. After the hydrologic calibration for two storm events in 1999, the results of sediment transport were presented for the same storm events. The results of temporal variation and spatial distribution of overland flow and sediment areas are shown using GRASS.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.3
• /
• pp.71-80
• /
• 2016

The component-based modeling framework for agricultural water-resources management (COMFARM) is a user-friendly, highly interoperable, lightweight modeling framework that supports the development of watershed-specific domain components. The objective of this study was to evaluate the suitability of the COMFARM for the design and creation of a component-based modeling system of agricultural reservoir watersheds. A case study that focused on a particular modeling system was conducted on a watershed that includes the Daehwa and Dangwol serial irrigation reservoirs. The hydrologic modeling system for the study area was constructed with linkable components, including the modified Tank, an agricultural water supply and drainage model, and a reservoir water balance model. The model parameters were each calibrated for two years, based on observed reservoir water levels. The simulated results were in good agreement with the observed data. In addition, the applicability of the COMFARM was evaluated for regions where reservoir outflows, including not only spillway release but also return flow by irrigation water supply, substantially affect the downstream river discharge. The COMFARM could help to develop effective water-management measures by allowing the construction of a modeling system and evaluation of multiple operational scenarios customized for a specific watershed.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.911-924
• /
• 2003

Many researches have been conducting on extracting geometry data and hydrologic parameters by using GIS technique. However, there is no clear standard on those methods yet. This study examines the changing pattern of runoff responses characteristics with applying lumped model on divided watershed. WMS is used in order to divide watershed and calculate hydrologic geometry data and parameters by GIS technique. HEC-1 is adopted as a hydrologic model to establish runoff responses. The basin is divided into small watersheds, which are approximately same size. This research conducted runoff response simulation of Pyoungchang River and Wichon River Basin. Especially, research was focused on what is the most appropriate level as a divined sub-basin, and tested the effect of size of sub-basin for the runoff response simulation. The results showed the size of sub-basin was not an important factor for the simulation results after a certain size. The results of this study can be applied as an appropriate guidance to select optimal simulation size of watershed for the lumped model in a specific watershed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1444-1449
• /
• 2006

Korea is about 70% of all country to mountain, and basin is consisted of various terrain, soil, vegetation, land use etc. because use land as intensive. Also, need basin hydrologic model that can analysis base outflow as well as outflow directly for calculation of discharge to establish irrigation plan. Inconvenient in use method and user interface offer side is causing by way that existing USGS WEASEL runs in PC Arc/Info, and ArcGIS with development of present GIS technology is applied in many fields offering convenience in analysis that use GIS. In this research, wished to develop suitable outflow parameter extraction system, For this, develop pre-processor and post-processor that effectively draw of hydrologic model input data from water resources DB through van example benchimarking, and developed input/output component of GIS base applicable to various hydrologic and water quality model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.39-39
• /
• 2012

Data assimilation techniques have received growing attention due to their capability to improve prediction in various areas. Despite of their potentials, applicable software frameworks to probabilistic approaches and data assimilation are still limited because the most of hydrologic modelling software are based on a deterministic approach. In this study, we developed a hydrological modelling framework for sequential data assimilation, namely MPI-OHyMoS. MPI-OHyMoS allows user to develop his/her own element models and to easily build a total simulation system model for hydrological simulations. Unlike process-based modelling framework, this software framework benefits from its object-oriented feature to flexibly represent hydrological processes without any change of the main library. In this software framework, sequential data assimilation based on the particle filters is available for any hydrologic models considering various sources of uncertainty originated from input forcing, parameters and observations. The particle filters are a Bayesian learning process in which the propagation of all uncertainties is carried out by a suitable selection of randomly generated particles without any assumptions about the nature of the distributions. In MPI-OHyMoS, ensemble simulations are parallelized, which can take advantage of high performance computing (HPC) system. We applied this software framework for several catchments in Japan using a distributed hydrologic model. Uncertainty of model parameters and radar rainfall estimates is assessed simultaneously in sequential data assimilation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.683-690
• /
• 2008

The objectives of this study are to provide an observation-based urban flood prediction model and to evaluate their performance on a restored Cheonggye stream. The study area, which has its own unique hydrologic and flooding conditions that can be characterized the standard of flood occurrence by watergate opening and walk lane inundation, measured stream discharges at the 5 sites and watergate opening and walk lane inundation through the main stream since 2006. This study derived the relationship between precipitation intensity and watergate opening and walk lane inundation time by using the observations of 2006 and verified their performance on 2007 flood events. The result showed that the coefficients of determination are ranged on 0.57-0.75, which would be acceptable if considering the complexity of the area and the proposed model simplicity. It also suggested the continuous observation of these properties is required for further improvement of the models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6B
• /
• pp.551-560
• /
• 2010

This study presents the export of constituent transport loads through a river system. The proposed constituent transport load estimating procedure can be operated with the on-going Korean TMDL monitoring system. This study firstly discusses the use of a hydrologic simulation model (TANK) to estimate stream-flow for the 40 sub-catchments. Model parameters are estimated from 8-days intervals flow data which has been monitored by NIER since 2004. Constituent transport loads are estimated with the 7-parameter log linear model whose parameters are estimated by the minimum variance unbiased estimator. Results from Nakdong river basin reveals that the proposed procedure provides satisfactory TN, TP and SS transport load estimates. As an application, a representative load duration curve is derived to represent the overall hydrologic flux of TN, TP and SS at Nakdong river basin.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.137-148
• /
• 2008

There have been many cases of using wetlands as an alternative in controlling stormwater, treating mining leachate, and agricultural discharge, and so on, recently. The reality is, however, that the wetlands are not properly applicable because of the lack of enough longterm data for wetlands due to the difficulty of long-term monitoring. Therefore, this study tries to analyze the storage of Upo, Mokpo, Sajipo, and Jjokjibeul in Topyeong watershed using SWAT(Soil and Water Assessment Tool) model, one of the long-term runoff hydrologic model, for the purpose of generating the long-term data and analyzing the hydrologic behavior of wetlands based on the generated data. Also, the changes in runoff at the outlet are analyzed after applying the simulation of constructing washland in Topyeong watershed and the storage in Upo is analyzed. The result shows that the runoff at the outlet of the watershed is decreased in rainy season from July to August and increased in dry season from December to February. In addition, the analysis of Upo storage concludes that Upo can be influenced by the construction of the washland. The duration curve of washland is then analyzed in order to evaluate the wetland's sustainability in terms of washland and it appears that the runoff of washland is simulated to be less than that of the existing wetland. Moreover, runoffs of some washlands are simulated to be less even in wet season. These results lead to the fact that there should be further hydrologic management for constructed washland. Then, the changes in loads (TN and TP) because of constructing washland are analyzed. The result shows that the loads are reduced because of the construction. Also, the changes in loads due to the construction of buffer strips are analyzed to compare the load reductions caused by a washland. Finally, REMM model, a riparian management model, is applied to overcome the hydrologic ambiguousness of SWAT model, and then, the SWAT model results are compared to those of REMM.

• Journal of Korea Water Resources Association
• /
• v.37 no.1
• /
• pp.21-29
• /
• 2004

The growth of water resources engineering associated with stable supply, management, development is essential to overcome the coming water deficit of our country. Large scale remote sensing and the analysis of sub-pixel variability of soil moisture fields are necessary in order to understand water cycle and to develop appropriate hydrologic model. The target resolution of coming Global monitoring of soil moisture field is about 10km which is not appropriate for the regional scale hydrologic model. Therefore, we need a downscaling scheme to generate hydrologic variables which are suitable for the regional hydrologic model. The results of the analysis of sub-pixel soil moisture variability show that the relationship between ancillary data and soil moisture fields shows there is very weak linear relationship. A downscaling scheme was developed using physically-based classification scheme and Neural Networks which are able to link the nonlinear relationship between ancillary data and soil moisture fields. The model is demonstrated by downscaling soil moisture fields from 4km to 0.2km resolution using remotely-sensed data from the Washita'92 experiment.

• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.505-516
• /
• 2012

The study applies a hydrologic simulation model, HEC-1 developed by Hydrologic Engineering Center to Daecheong dam watershed for modeling hourly inflows of Daecheong dam. Although the HEC-1 model provides an automatic optimization technique for some of the parameters, the built-in optimization model is not sufficient in estimating reliable parameters. In particular, the optimization model often fails to estimate the parameters when a large number of parameters exist. In this regard, a main objective of this study is to develop Bayesian Markov Chain Monte Carlo simulation based HEC-1 model (BHEC-1). The Clark IUH method for transformation of precipitation excess to runoff and the soil conservation service runoff curve method for abstractions were used in Bayesian Monte Carlo simulation. Simulations of runoff at the Daecheong station in the HEC-1 model under Bayesian optimization scheme allow the posterior probability distributions of the hydrograph thus providing uncertainties in rainfall-runoff process. The proposed model showed a powerful performance in terms of estimating model parameters and deriving full uncertainties so that the model can be applied to various hydrologic problems such as frequency curve derivation, dam risk analysis and climate change study.