• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.46-51
• /
• 2000

The resistance of Cornyza bonariensis to herbicide paraquat was investigated by evaluating the activities of three enzymes concerning in scavenging paraquat-generated toxic oxygen species such as superoxide radical and hydrogen peroxide in resistant and susceptible biotypes. Conyza bonariensis inhabited in cultivated area was more tolerant to paraquat than that of uncultivated area. This is the first report that a biotype of Cornyza bonariensis has appeared in an area with repeated paraquat treatments of Korea. Superoxide dismutase activity of resistant biotype was 20% higher as 150 than that of susceptible biotype. Ascorbate peroxidase activity of resistant biotype was 44% higher than that of susceptible biotype. Glutathione reductase activity of resistant biotype was 64% higher than that of susceptible biotype. It can be concluded from above results that the resistance of Conyza bonariensis to paraquat depends partially on the toxic oxygen species-scavenging efficiency of protective multienzymatic system which is composed of three enzymes, superoxide dismutase, ascorbate peroxidase, and glutathione reductase.

• Mycobiology
• /
• v.42 no.1
• /
• pp.52-58
• /
• 2014

A nucleoside diphosphate-linked moiety X (Nudix) hydrolase-like gene, YSA1, has been identified as one of the gromwell plant extract-responsive genes in Cryptococcus neoformans. Ysa1 is known to control intracellular concentrations of ADP-ribose or O-acetyl-ADP-ribose, and has diverse biological functions, including the response to oxidative stress in the ascomycete yeast, Saccharomyces cerevisiae. In this study, we characterized the role of YSA1 in the stress response and adaptation of the basidiomycete yeast, C. neoformans. We constructed three independent deletion mutants for YSA1, and analyzed their mutant phenotypes. We found that ysa1 mutants did not show increased sensitivity to reactive oxygen species-producing oxidative damage agents, such as hydrogen peroxide and menadione, but exhibited increased sensitivity to diamide, which is a thiol-specific oxidant. Ysa1 was dispensable for the response to most environmental stresses, such as genotoxic, osmotic, and endoplasmic reticulum stress. In conclusion, modulation of YSA1 may regulate the cellular response and adaptation of C. neoformans to certain oxidative stresses and contribute to the evolution of antifungal drug resistance.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.100.2-101
• /
• 2003

The global regulator, GacS (global antibiotic and cyanide sensor kinase), was required for the increased resistance to hydrogen peroxide occurring as cultures of the rhizobacterium, P. chlororaphis O6, matured. Specific stationary-phase peroxidase and catalase isozymes were absent in the GacS mutant, whereas a manganese-superoxide dismutase isozyme was expressed earlier and to a great extent than wild type. In the wild type cell, transcript accumulation of rpoS was higher in late logarithmic-phase cells than cells from mid logarithmic- or stationary-phase. Transcripts from rpoS in the GacS mutant were reduced in each of these growth phases compared to the wild type expression. The down stream sequence from rpoS lacked sequences encoding a small RNA, rsmZ, found in other pseudomonads and implicated in control of genes activated by the GacS system. These findings suggest that GacS-mediated regulation of RpoS plays role in control of oxidative stress in P. chlororaphis O6 by as yet an unknown mechanism.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.227-233
• /
• 2013

In this study, we evaluated the ability of various disinfectants to suppress the growth of microorganisms in fresh-cut products and organic vegetable. The growth of more than 50% of B. cereus isolates were suppressed by 50% ethanol, 0.1% hydrogen peroxide, 0.4% sodium hypochlorite or 1% calcium oxide. E. coli generally showed high susceptibility to concentration of 10% ethanol, 0.4% sodium hypochlorite and 1% calcium oxide. Eighty percent or more of S. aureus isolates exhibited resistance to ethanol, hydrogen peroxide and sodium hypochlorite, but the isolates were susceptible to concentrations of 1% calcium oxide. All isolates evaluated in this study were sensitive to benzalkonium chloride (BAC) and growth in the presence of $2.0{\mu}g/mL$ of BAC was completely inhibited. These pathogens showed widely different susceptibilities to different organic acids. Greater than 0.5% acetic acid and 2% and higher concentrations of malic acid and tartaric acid inhibited the growth of 60% of the isolates of B. cereus. Two percent acetic acid and tartaric acid inhibited 50% of the S. aureus isolates. Seventy percent of the E. coli isolates were resistant to malic acid and susceptible to 1% acetic acid and 10% tartaric acid. The antibacterial effects of the various sanitizers evaluated in this study were not only dependent on the type of disinfectant but also on the pathogen. Thus, it is important to select a sanitizer that is safe and effective at removing specific types of microorganisms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.650-656
• /
• 2018

The TFT-LCD industry is a kind of large-scale industrial Giant Microelectronics device industry and has a similar semiconductor process technology. Wet etching forms a relatively large proportion of the entire TFT process, but the number of published research papers on this topic is limited. The main reason for this is that the components of the etchant, in which the reaction takes place, are confidential and rarely publicized. Aluminum (Al) and copper (Cu), which have been used in recent years for the manufacture of large area LCDs, are very difficult materials to process using wet etching. Cu, a low-resistance material, can only be used in the wet etching process, and is used as a substitute for Al due to its high speed etching, low failure rate, and low power consumption. Further, the abnormal reaction of hydrogen peroxide ($H_2O_2$), which is used as an etching solution, requires additional piping and electrical safety devices. This paper proposes a method of minimizing the damage to the plant in the case of adverse reactions, though it cannot limit the adverse reaction of hydrogen peroxide. In recent years, there have been many cases in which aluminum etching equipment has been changed to copper. This paper presents a countermeasure against abnormal reactions by implementing safety PLC with a high safety grade.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.196-201
• /
• 2023

In this study, a CNT fiber flexible electrode grafted with CuO nanoparticles (CuO NPs) and polyaniline (PANI) was developed and applied to a nonenzymatic electrochemical sensor for H₂O₂ detection. CuO NPs/PANI/CNT fiber electrode was fabricated through the synthesis and deposition of PANI and CuO NPs on the CNT fiber surface using an electrochemical method. Surface morphology and elemental composition of the CuO NPs/PANI/CNT fiber electrode were characterized by scanning electron microscope with energy dispersive X-ray spectrometry. And its electrochemical characteristics were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA). Compared with a bare CNT fiber as a control group, the CuO NPs/PANI/CNT fiber electrode showed a 4.78-fold increase in effective surface area and a 8.33-fold decrease in electron transfer resistance, which leads to excellent electrochemical properties such as a good electrical conductivity and an efficient electron transfer. These improved characteristics were due to the synergistic effect through the grafting of CNT fiber, PANI and CuO NPs. As a result, this electrode enhanced the H₂O₂ sensing performance.

• KSBB Journal
• /
• v.11 no.4
• /
• pp.481-488
• /
• 1996

In spite of diverse applications of chitin derivatives, commercial use of chitin has been limited due to highly resistance to chemicals and the absense of proper solvents. One of methods to reduce such high resistance to chemicals is to make microcrystalline chitin(MCC) by hydrolysis of chitin. Presently, MCC is produced mainly by using high concentration of acid, but this treatment requires an extensive posttreatment to remove or recover acid. An alternative process for MCC production was developed by using dilute hydrochloric acid with ultrasound and hydrogen peroxide. The major parameters for this process were found to be acid concentration, swelling time and temperature, and irradiation time and frequency of ultrasound. The effects of these parameters on MCC molecular weight were investigated. The molecular weight of MCC produced at a typical condition was around 30,000 which was approximately 1/8 of that of chitin and approached to a constant value. This phenomenon was explained by introducing the model of molecular arrangement of cellulose. SEM analysis showed that both chitin and MCC had a fibrous shaped morphology and the fibril size of MCC was much smaller than that of chitin.

• The Plant Pathology Journal
• /
• v.27 no.1
• /
• pp.89-92
• /
• 2011

Cyclic AMP receptor-like protein (Clp), is known to be a global transcriptional regulator for the expression of virulence factors in Xanthomonas campestris pv. campestris (Xcc). Sequence analysis showed that Xanthomonas oryzae pv. oryzae (Xoo) contains a gene that is strongly homologous to the Xcc clp. In order to determine the role of the Clp homolog in Xoo, a marker exchange mutant of $clp_{xoo4158}$ was generated. Virulence and virulence factors, such as the production of cellulase, xylanase, and extracellular polysaccharides (EPS) and swarming motility were significantly decreased in the $clp_{xoo4158}$ mutant. Moreover, the mutation caused the strain to be more sensitive to hydrogen peroxide and to over-produce siderophores. Complementation of the mutant restored the mutation-related phenotypes. Expression of $clp_{xoo4158}$, assessed by reverse-transcription realtime PCR and clp promoter activity, was significantly reduced in the rpfB, rpfF, rpfC, and rpfG mutants. These results suggest that the clp homolog, $clp_{xoo4158}$, is involved in the control of virulence and resistance against oxidative stress, and that expression of the gene is controlled by RpfC and RpfG through a diffusible signal factor (DSF) signal in Xanthomonas oryzae pv. oryzae KACC10859.

• Journal of Veterinary Science
• /
• v.24 no.6
• /
• pp.85.1-85.13
• /
• 2023

Background: A recent increase in the occurrence of canine skin and soft tissue infections, including otitis externa and pyoderma, caused by antimicrobial-resistant Staphylococcus pseudintermedius and S. schleiferi has become a significant public and veterinary health issues. Objective: We investigated the virulence potentials associated with the occurrence of canine otitis externa in S. pseudintermedius and S. schleiferi. Methods: In this study, the prevalence of genes encoding leukocidins, exfoliative toxins, and staphylococcal enterotoxins (SEs) was investigated using previously characterized S. pseudintermedius (n = 26) and S. schleiferi (n = 19) isolates derived from canine otitis externa. Susceptibility to cathelicidins (K9CATH and PMAP-36) and hydrogen peroxide (H₂O₂) was also examined in both staphylococcal species. Results: A high prevalence of genes encoding leukocidins (lukS/F-I, lukS1/F1-S, and lukS2/F2-S), exfoliative toxins (siet, expB, and sset), and SEs was identified in both S. pseudintermedius and S. schleiferi isolates. Notably, S. pseudintermedius isolates possessed higher number of SE genes, especially newer SE genes, than S. schleiferi isolates harboring egc clusters. Although no significant differences in susceptibility to K9CATH and H₂O₂ were observed between the two isolate groups, S. pseudintermedius isolates exhibited enhanced resistance to PMAP-36 compared to S. schleiferi isolates. Conclusions: These findings suggest that high a prevalence of various toxin genes together with enhanced resistance to cathelicidins may contribute to the pathogenicity of S. pseudintermedius and S. schleiferi in canine cutaneous infections.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.