• 펄프종이기술
• /
• 제30권2호
• /
• pp.85-95
• /
• 1998

Traditionally, Hanji had been made only with the bast fiber of paper mulberry (Broussonetia kazinoki). Nowadays, Hanji has been made mainly in the mixed forms of paper mulberry bast fiber and waste paper, and consequently it has raised many problems using them. This study was carried out to investigate the characteristics of Hanji mixed with paper mulberry bast part and whole stalk pulps. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. The sheet formations were improved as the increase of whole stalk pulp contents, while the sheet strengths were decreased. In the physical properties of the Hanji mixed with bast part and whole stalk pulps, the handsheet strengths were decreased as the increase of the whole stalk pulp contents. The tensile strength and folding endurance of the Hanji containing 40∼60% of whole stalk pulps were higher as compared to the others.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.96-104
• /
• 1999

Anatomical and chemical properties of three mulberry species (Morus spp) were analyzed as an alternative row material for the paper mulberry (Broussonetia kazinoki) . The pulping and papermaing characteristics of bast fiber and whole stalks by three different pulping processes, conventional alkali, alkali-hydrogen peroxide, and sulfomethylated, for the Hanji were investigated. The fiber dimension of M.bombycis was the biggest of the species. The fiber length of upper part and the fiber width and cell wall thickness of lower part were bigger than the others. The extractives and ash contents of bast fiber were higher than those of whole stalk , and holocellulose and lignin contents of whole stalk were higher than those of bast fiber. The pulp yields of M.alba bast fiber, M.bombycis whole stalk, and sufomethylated pulping were higher than the others.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.58-63
• /
• 1999

Three kinds of papers were prepared from different beating degree of pulps. Physical and optical properties were examined to elucidate the deterioration mechanism of paper according to beating degrees. Changes of double folds, elongation, water retention value, DP, K/S value and visible, UV region light absorption spectra of those papers treated by UV light were studied. Double folds and brightness were decreased more rapidly by UV treatment with increasing of beating degree. The light absorption rates of pulps in visible and UV region were also increased with change of beating level. The formation of new hydrogen bonds and higher light absorption rate of pulps according to beating induced to absorb and interact with much UV light. These phenomena maybe brought about to accelerate paper deteriortion by UV treatment both optical and physical properties.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2005년도 추계학술발표논문집
• /
• pp.259-263
• /
• 2005

This study was performed to introduce recently developed Polyvinylamine as a wet-end process improving aids and paper properties improving aids. As a retention and drainage aids, cationicity of Polyvinylamine was a very important factor of BCTMP and ONP stock condition. As a dry tensile strength aids, The hydrogen bond of acrylamide functionality and hydroxyl functionality of the pulp was a very important factor of LBKP stock condition and cationicity of Polyvinylamine was a very important factor of BCTMP and ONP stock condition.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.1-8
• /
• 2008

The efficiency of retention systems including compozil-G, hydrocol, compozil-S, and micropolymer under highly closed papermaking system was evaluated using contaminated white waters prepared in the laboratory. Compozil-G and compozil-S performed better in retention than hydrocol and micropolymer systems. This suggested that stronger hydrogen bonding between fiber and guar gum or starch was formed to give stronger flocculation and better retention. Especially compozil-G outperformed compozil-S in retention, and this indicated the presence of stronger interaction between guar and cellulose fibers probably due to their similarity in chemical structure. Two compozil retention systems decreased the cationic demand and COD more effectively than hydrocol and microparticle systems. In particular, compozil-G that uses guar gum was highly effective in decreasing anionic trashes at low dosage.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.213-216
• /
• 2004

It is a quite quality concerning to control temperature of single crystalline growth as it does when you get most of heat treating products. It is also important factor to control temperature when you make the $A1_2O_3$(single crystalline) used to artificial jewels, glass of watches, heat resistant transparent glasses. Thus, it is a major interest to get the proper temperature in accordance with the time process while you are making mixture of oxygen and hydrogen to have the right temperature. In this paper, we will study of electrical valve positioning system for the gas mixture to improve the quality of products.

• 펄프종이기술
• /
• 제33권5호
• /
• pp.25-29
• /
• 2001

Dimethyldioxirane (DMD), which is a source of active oxygen, is effective agent that can be used in chemical pulp bleaching. In this study, delignification of kraft bagasse pulp has been carried out by using DMD. The effect of the applied charge of DMD (as active oxygen) and pH of the delignification medium were studied. The optimum conditions of the applied DMD charge and pH of the delignification reaction were achieved at pH range from 8~9, 2% of DMD (as active oxygen) and the rest of delignification reaction conditions were $25^{\circ}C$, 60 min, and 12% pulp consistency. The development of brightness per unit kappa number removal (ΔBrightness/ Δ Kappa number) has highest value at the optimum condition. The study showed that the reactivity of kraft bagasse pulp be enhanced to wards alkaline hydrogen peroxide bleaching by pulp treatment with DMD.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.56-62
• /
• 2005

The catalytic effect of molybdovandophosphate heteropolyanion (HPAs) on the delignification of kraft bagasse pulp by hydrogen peroxide has been investigated. Very small amounts of the catalyst (0.05 0.3 mM/l) gave convenient results. Partial reduction of the catalyst was also studied. The effect of reaction medium (water, ethyl alcohol and acetone) on the bleaching was also studied. The results obtained show that the optimum condition for bleaching in presence of polyoxometalate were 0.05 mM/l catalyst concentration at $70^{\circ}C$ reaction temperature and $7\%$ consistency at pH 2 in aqueous medium. The ratio of water to solvent of 60:40 from acetone gives higher brightness than ethyl alcohol. The catalyst solution can be reused for 5 times without any reduction in brightness. ESR for the blank and exhausted solutions under different conditions was also carried out to find the relation between reduced metals and pulp brightness.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.88-95
• /
• 2013

Effects of beating and water immersion time on fiber swelling and paper properties were elucidated for the fundamental study of producing high bulk paper. Chemical pulps were beaten for various freeness and the beaten pulp was immersed in water up to 24 hours. Fiber swelling was evaluated by measuring water retention value (WRV). It was found that fiber swelling, bulk and paper strength were quickly changed at the initial stage of beating. Immersion in water did not significantly increase WRV, paper density and strength, implying that soaking in water alone could not effectively swell fiber wall. In order to swell further, hydrogen bonds between fibrils in fiber wall and hence fiber wall structure shall be broken by mechanical force during beating.

• 한국재난정보학회 논문집
• /
• 제20권2호
• /
• pp.339-350
• /
• 2024

연구목적: 이 연구는 서울시 10개 수소충전소의 공간적 접근성 분석을 실시하고, 접근이 어려운 지역을 식별하였다. 입지의 형평성과 안전성 측면에서 신규 입지를 추가하여 접근성을 분석을 다시 수행한 후, 개선 효과 비교를 통해 시사점을 도출하는 것을 목적으로 한다. 연구방법: ArcGIS 프로그램의 네트워크 분석 기반의 입지배분(Location-Allocation) 모형과 이용권역(Service Area) 모형을 적용하여 접근이 취약한 지역을 식별하였다. 입지선정 방분석 기반의 입지배분(Location-Allocation) 모형과 이용권역(Service Area) 모형을 적용하여 접근이 취약한 지역을 식별하였다. 입지선정 방법은 부족한 수소충전소에 신속한 도착이 필요한 점을 고려하여 '최소시설 수로 최대수요를 확보하도록 함(Minimize Facilities)' 방법을 적용하였다. 특정한 시간 내의 도착을 위한 한계 거리는 서울시 2022년 평균 차량통행속도(23.1km/h, 서울시 열린데이터 광장)를 적용하여 10분 이동가능 거리인 3,850m과 5,775m(15분) 그리고 7,700m(20분)의 세 가지로 분하여 분석하였다. 신규 입지는 수소충전소 설치에 대한 갈등을 최소화하기 위하여 산업통상자원부의 특례기준1)을 적용하여 기존의 주유소, LPG/CNG 충전소 중에서 수소충전소 추가 설치가 가능한 후보지를 도출하였다. 연구결과: 분석 결과, 최종적으로 상세 현황 검토를 통해 추가 후보지 5개소가 도출되었다. 기존 10개의 수소충전소에 20분 이내 접근이 취약한 지역을 중심으로 상대적으로 안전한 기존 주유소와 LPG/CNG 충전소에 신규 수소충전소 5개소를 설치하면 접근성이 크게 개선됨을 확인할 수 있었다. 그럼에도 불구하고 여전히 접근이 어려운 지역이 있는 것으로 나타났다. 결론: 입지배분모형을 이용하여 수소충전소 접근이 어려운 지역을 식별하고, 설치의 우선순위를 부여한다면 과학적 근거 기반 수소충전소 입지 선정을 위한 의사결정을 지원할 수 있다.