• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1040-1049
• /
• 2010

GHG 및 대기오염물질 배출 규제는 고효율 및 친환경에 적합한 새로운 선박용 동력장치의 필요성을 제기하고 있다. 최근 이와 같은 문제들을 근본적으로 해결하기 위한 지속가능한 방법으로서 연료전지를 선박의 동력발생장치로 도입하고자 하는 검토가 진행되고 있다. 본 논문은 액체연료인 메탄올을 기반으로 한 고체산화물형 연료전지/가스터빈 하이브리드시스템의 성능을 평가한 것으로 스택의 작동온도, 전류밀도, 가스터빈 압력비, 공기예열기 온도효율, TIT(turbine inlet temperature)의 영향을 시뮬레이션으로 검토하고 그 결과를 기체연료인 메탄의 경우와 비교하고 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.259.1-259.1
• /
• 2014

Recently non-thermal plasma has been frequently applied to various research fields. The liquid plasma have received much attention lately because of interests in surgical and nanomaterial synthesis applications. Especially, intensive researches have been carried out for non-thermal plasma in liquid by using various electrode configurations and power supplies. We have developed a bioplasma source which could be used in a liquid, in which outer insulator has been covered onto the outer electrode. Also we have also put an insulator between the inner and outer electrode. Based on the surface discharge mode, the nonthermal bioplasma has been generated inside a liquid by using an alternating current voltage generator with peak voltage of 12 kV under driving frequency of 22 KHz. Here the discharge voltage and current have been measured for electrical characteristics. Especially, We have measured discharge and optical characteristics under various liquids of deionized (DI) water, tap water, and saline by using monochromator. We have also observed nitric oxide (NO), hydrogen peroxide (H2O2), and hydroxyl (OH) radical species by optical emission spectroscopy during the operation of bioplasma discharge inside various kinds of DI water, tap water, and saline. Here the temperature has been kept to be $40^{\circ}C$ or less when discharge in liquid has been operated in this experiment. Also we have measured plasma temperature by high speed camera image and density by using either H-alpha or H-beta Stark broadening method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.83-87
• /
• 2002

Plasma enhanced chemical vapor deposited (PECVD) silicon nitride ($SiN_X$) is widely used as a gate dielectric material for the hydrogenated amorphous silicon(a-Si:H) thin film transistors (TFT's). We investigated $SiN_X$ films were deposited PECVD at low temperature ($300^{\circ}C$). The reaction gases were used pure nitrogen and a helium diluted of silane gas(20% $SiH_4$, 80% He). Experimental investigations were carried out with the variation of $N_2/SiH_4$ flow ratios from 3 to 50 and the rf power of 200 W. This article presents the $SiN_X$ gate dielectric studies in terms of deposition rate, hydrogen content, etch rate and C-V, leakage current density characteristics for the gate dielectric layer of thin film transistor applications. Electrical properties were analyzed through high frequency (1MHz) C-V and current-voltage (I-V) measurements. The thickness and the refractive index on the films were measured by ellipsometry and chemical bonds were determined by using an FT-IR equipment.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• 유기물자원화
• /
• 제16권3호
• /
• pp.65-74
• /
• 2008

본 연구에서는 서로다른 4지역의 도시 생활 쓰레기의 성상 및 물리 화학적 조성을 조사 하였다. 생활 쓰레기 연료화시설 설치 및 자료확보 차원 매립장 관리차원에서 매우 필요한 연구이다. 평균 밀도는 $79{\sim}199.8kg/m^3$ 범위내의 결과를 얻었다. 생활 쓰레기는 8.87%의 음식물류, 38.8%의 종이류, 34.12%의 플라스틱류 및 비닐류, 7.16%의 섬유류, 0.96%의 목재류 1.3%의 고무 및 가죽류 등으로 구성되어 있다. 생활쓰레기의 대부분은 음식물, 종이류, 플라스틱류 등으로 이루어져 있으며 94% 정도가 가연 성분이다. 삼성분 분석에서는 17.38%의 수분 및 69.03%의 가연분 그리고 6.24%의 회분으로 이루어져 있다. 원소분석결과는 탄소 산소 수소 순으로 이루어져 있다. 생활쓰레기의 저위 발열량은 2973.8kcal/kg 이며 고위 발열량은 5209.94 kcal/kg 결과를 얻었다.

• 한국가시화정보학회지
• /
• 제17권3호
• /
• pp.24-31
• /
• 2019

Recently, an air-lift bio-reactor operated by micro bubbles has been utilized to product hydrogen fuel. To enhance the performance, characteristics of hydrodynamics inside the bio-reactor were analyzed using a numerical simulation for two-phase flow. An Eulerian model was employed for both of liquid and gas phases. The standard k-ε model was used for turbulence induced by micro bubbles. A Population Balance Model was employed to consider size distribution of bubbles. A hollow cylinder was introduced at the center of the reactor to reduce a dead area which disturbs circulation of CO bubbles. An appropriate diameter of the draft tube and hollow cylinder were optimized for better performance of the bio-reactor. The optimum model could be obtained when the cross-sectional area ratio of the hollow cylinder to the reactor, and the width ratio of the riser to the downcomer approached 0.4 and 3.5, respectively. Consequently, it is expected that the optimum model could enhance the performance of the bio-reactor with the homogeneous distribution and higher density of CO, and more effective mixing.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.223-230
• /
• 2011

An electrolytic oxidation process was applied to remove odorous compounds from non-point odor sources including wastewater pipelines and manholes. In this study, a distance between the anode and the cathode of the electrolytic process was varied as a system operating parameters, and its effects on odor removal efficiencies and reaction characteristics were investigated. Odor precursors such as sediment organic matters and reduced sulfur/nitrogen compounds were effectively oxidized in the electrolytic process, and a change in oxidation-reduction potential (ORP) indicated that an stringent anaerobic condition shifted to a mild anoxic condition rapidly. At an electrode distance of 1 cm and an applied voltage of 30 V, a system current was maintained at 1 A, and the current density was 23.1 $mA/cm^{2}$. Under the condition, the removal efficiency of hydrogen sulfide in gas phase was found to be 100%, and 93% of ammonium ion was removed from the liquid phase during the 120 minute operating period. Moreover, the sulfate ion (${SO_4}^{2-}$) concentration increased about three times from its initial value due to the active oxidation. As the specific power consumption (i.e., the energy input normalized by the effective volume) increased, the oxidation progressed rapidly, however, the oxidation rate was varied depending on target compounds. Consequently, a threshold power consumption for each odorous compound needs to be experimentally determined for an effective application of the electrolytic oxidation.

• 폴리머
• /
• 제35권1호
• /
• pp.72-76
• /
• 2011

폴리(비닐 알코올)(PVA)의 수분 팽윤성 조절을 위하여 천연 색소 기교제로 PVA를 가교한 후, 이들의 물성을 화학 가교된 PVA와 함께 비교하였다. 천연 가교제로 사용된 안토시아닌 그리고 크로신에 함유된 하이드록시기는 NaCl 촉매 하에서 PVA의 하이드록시기와 수소 결합하여 PVA를 물리적으로 가교시킴을 알 수 있었다. 화학 가교제인 Polycup 172에 의하여 가교된 PVA와 비교하여 수분 팽윤성이 현저히 감소하며 또한 가교에 의한 결정화도가 감소함을 확인하였다. 천연 가교제로 가교된 PVA는 화학 가교된 PVA에 비하여 상대적으로 열안정성이 떨어지나 함유된 다당류에도 불구하고 순수 PVA보다는 높은 열안정성을 가짐을 알 수 있었다.

• 한국결정학회지
• /
• 제11권3호
• /
• pp.162-166
• /
• 2000

KD₂PO₄ single crystals were grown from D₂O with reagent KH₂PO₄ and the crystal structure was determined by X-ray and neutron diffraction methods. The crystals are tetragonal at room temperature, I42d, with lattice parameters of a=7.4633(7), c=6.9785(5) Å and Z=4. Intensity data were collected on an Enraf-nonius CAD4 diffractometer with a graphite monochromated MoK/sub α/ radiation (λ=0.7107Å) and on the neutron four circle single crystal diffractometer with Ge(331) monochromated neutron beam (λ=0.997Å). The structure was refined by full-matrix least-square to final R and wR values of 0.030 and 0.072, respectively, for 204 observed reflections with I>2σ(I) by X-ray diffraction and to final R=0.041 and wR=0.096 for 144 observed relfecdtions by neutron diffraction. The O…O distance of 2.516(4)Å obtained by X-ray diffraction is the same as that of 2.515(4)Å by neutron diffraction. On the other hand, the O-D/H distance of 0.84(4)Å by X-ray diffraction is considerably shorter than 1.029(7) Åby neutron diffraction. Hydrogen and deuterium can be readily distinguished by neutrons. In this crystal 66% of H-positions were substituted by D and the rest 34% occupied by H. The phase transition temperature of DKDP obtained with deuteration levels is f193K. This value agrees fairly well with the result of DSC measurement. The nuclear density distribution by neutron diffraction provides an observation of the disordered state of D/H in KD₂PO₄ at room temperature.

• 방사성폐기물학회지
• /
• 제8권1호
• /
• pp.49-56
• /
• 2010

Pyroprocessing에 의한 사용후핵연료 처리 과정에서 방사성 희토류 염화물이 포함된 폐용융염이 발생된다. 이러한 폐 용융염 내에 존재하는 방사성 희토류 염화물을 산화물로 침전시켜 회수함으로서 용융염을 재생할 수 있다. 최종적으로 발생되는 방사성 희토류 산화물의 저장과 처분에 적합한 monolithic 고화체를 제조하기 위한 연구를 수행하였다. 본 연구에서는 고상 소결에 의해 붕규산 유리에 의한 고화체 제조, 희토류 산화물을 모나자이트로 합성한 후 붕규산 유리에 의한 고화체 제조를 수행하였다. 또한 zinc titanate 세라믹이 주요성분인 고화 매질(ZIT)을 개발하여 고화체를 제조하였으며 각각의 고화체에 대한 침출 및 물리화학적 특성을 비교 평가하였다. 고상 소결에 의해 제조된 ZIT 매질 고화체는 내 침출성이 크며 밀도가 크고 열전도도가 우수한 특성을 나타내었다.