• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2589-2593
• /
• 2008

In a fuel cell vehicle using polymer electrolyte membrane fuel cell(PEMFC), hydrogen is over-supplied to gain higher stack efficiency. So it is needed considering fuel efficiency to re-circulate hydrogen which is not reacted in stack. And to re-circulate hydrogen, a blower or an ejector is used. Ejector re-circulation system has several merits compared with blower system, for example no parasite energy, simple structure and no lubrication system. But the secondary flow of an ejector in fuel cell vehicle, has high humidity because of crossover problem in stack. Therefore in this paper, ejector is designed by 1-D modeling and CFD with the primary and secondary flow of hydrogen. And the ejector which has the primary and secondary flow of air, is designed to have the same Reynolds number and Mach number at the nozzle exit as the hydrogen ejector's. And this air ejector is tested while the humidity of the secondary flow is varied.

• 공업화학
• /
• 제30권4호
• /
• pp.389-398
• /
• 2019

수소에너지는 화석연료의 사용으로 인해 나타나는 기후변화의 문제를 해결할 수 있는 방안일 뿐 아니라 산업용 전력 생산, 자동차용 연료 등을 위한 대체가능한 에너지로 인식되고 있다. 수소제조 방법 중 물의 전기분해를 이용한 방법이 가장 효율적이고 실용적인 방법으로 여겨지고 있으며, 수소를 물로부터 직접 제조하는 방법은 화석연료 이용 제조 방법과 비교하여 보았을 때 지구환경 오염물질인 메탄, 이산화탄소 등의 배출이 없다. 본 총설은 수소제조 방법 중 하나인 물 전기분해의 종류인 알칼리 수전해(alkaline water electrolysis, AWE), 고분자전해질막 수전해(polymer electrolyte membrane water electrolysis, PEMWE)에 대해서 분석하고 최근 연구 중인 탄화수소 전해질막의 동향 및 전해질막의 문제점인 크로스오버현상에 대해 설명하였다.

• 한국수소및신에너지학회논문집
• /
• 제12권4호
• /
• pp.257-265
• /
• 2001

Placing a hydrogen conducting, methanol impermeable metallic barrier like palladium (Pd) is a well-known method for preventing methanol crossover through solid polymer electrolyte for direct methanol fuel cells (DMFC). Applying a bias potential between the anode and the barrier can further develop this concept so that the hydrogen transfer rate is enhanced. Since hydrogen diffuses in Pd as atomic form while it moves through nafion electrolyte as ion, it has to be reduced or oxidized whenever it passes the interface formed by Pd and the electrolyte. We performed experiments to measure the hydrogen transport through the Pd membrane placed in Nafion electrolyte of hydrogen/oxygen fuel cell (PEMFC). Applying a bias potential between the hydrogen electrode of the cell and the Pd membrane facilitated the hydrogen passage through the Pd membrane. The results show that the cell current measured with the Pd membrane placed reached almost 40 % the value measured with the cell without Pd membrane. It was found that the current flown through the bias path is only a few percent of the cell current.

• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.103-110
• /
• 2008

The most failure mode of PEM fuel cell is gas crossover caused by pinhole formation in MEAs. The degradation phenomena of MEA with pinholes were evaluated in various accelerated operation condition, such as OCV, low humidity and high partial pressure of oxygen. The performances of MEA with pinholes were almost same before and after normal 144 hours operation($70^{\circ}C$, $640mA/cm^2$, 65%RH $H_2/air$). The results of accelerated operation showed that OCV and low humidity condition more deteriorated MEA than gas crossover owing to pinholes. When oxygen was used as cathode gas, the pinholes of MEA were enlarged due to heat of combustion reaction on Pt catalyst of electrodes. This combustion reaction occurred at pinholes near gas inlet and resulted in local MEA failure.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.26-31
• /
• 2023

고분자 전해질 연료전지(Polymer electrolyte membrane fuel cell, PEMFC) 고분자막의 내구성 향상을 위해서 빠른 시간에 내구성을 평가할 수 있는 가속 내구 평가법들이 연구 개발되었다. 그러나 트럭, 버스 등 대형 상용차용 연료전지 수명은 승용차보다 3배 이상 요구되어 화학적 가속 내구 평가(Accelerated stress test, AST) 시간도 길어져서 1,500 시간 이상이 되었다. 그래서 본 연구에서는 단 시간내에 고분자막의 화학적 내구성을 평가하기 위한 방법으로 막 초기 특성으로 내구성을 예측할 수 있을지 검토하였다. 초기 특성으로 수소투과전류밀도(Hydrogen crossover current density, HCCD)와 단락 저항(Short resistance, SR)을 그리고 3시간의 셀 밖 실험으로 가능한 Fenton 실험을 통해 AST 시간을 예측하였다. HCCD와 불소 이온 유출 농도가 증가하면 AST 시간이 선형적으로 짧아지는 경향을 보였으나 편차가 있었다(R² ≒0.65). SR이 감소하면 AST 시간이 선형적으로 증가하는 상관관계를 보였으며 정확도가 높아(R² =0.93) 고분 자막 초기 SR로 AST 시간을 예측할 수 있었다.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1393-1400
• /
• 2003

Ignition of hydrogen and oxygen in the "third limit" is theoretically investigated in the stagnation point flow with activation energy asymptotics. With the steady-state approximations of H, OH, O and HO$_2$, a two-step reduced kinetic mechanism is derived for the regime lower than the crossover temperature T$_{c}$ at which the rates of production and consumption of all radicals are equal. Appropriate scaling of Damkohler number successfully provides the explicit relationship between pressure, temperature and strain rate at ignition. It is shown that, compared with those for the counterflow, ignition temperatures for the stagnation point flow are considerably increased with increasing the system pressure. This is because ignition in the "third limit" is characterized by the production of reduction of $H_2O$$_2$, which is reduced by wall effect. Strain rate substantially affects ignition temperature because key reaction rates of $H_2O$$_2$ are comparably with its transport rate, while the mixture temperature and the hydrogen composition do not significantly affect ignition temperature.e.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.438-442
• /
• 2006

The degradation of Nafion membrane by hydrogen peroxide was investigated in polymer electrolyte membrane fuel cell (PEMFC). Degradation tests were carried out in a solution of $10{\sim}30%$ hydrogen peroxide containing 4ppm $Fe^{2+}$ ion which is well known as Fenton's reagent at $80^{\circ}C$ for 48hr. Characterization of degraded membranes were examined through the IR, Water-uptake, Ion exchange capacity, mechanical strength and $H_2$ permeability. After degradation, C-F, S-O and C-O chemical bonds of membrane were broken by radical formed by $H_2O_2$ decomposition. Breaking of C-F bond which is the membrane backbone reduced the mechanical strength of Nafion membrane and hence induced pinholes, resulting in increase of $H_2$ crossover through the membrane. Also the decomposition of C-O and S-O, side chain and terminal bond of membrane, decreased the ion exchange capacity of the membrane.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.227-230
• /
• 2005

There is a worldwide interest In the development and commercialization of PEMFCs for vehicular and stationary applications. The major problem in the practical use of PEMFCs is the deactivation of the Pt anode electrocatalyst by the adsorption of carbon monoxide. Therefore, intensive work has been devoted to finding electrocatalysts that are tolerant to CO in hydrogen at operating temperatures bellow $100^{\circ}C$. Also, DMFC is considered to be one of the most promising technologies for energy generation. But, the most important problem associated with the DMFC is the slow reaction rate of methanol oxidation and the second major problem is fuel crossover. So, the performance of a state-of-the-art DMFC is considerably lower than that of hydrogen-fuelled PEMFC. In this research, the preparation and characterization of electrode materials will be introduced. Also, some electrochemical techniques for the characterization of PEMFCs will be presented.

• 전기화학회지
• /
• 제26권2호
• /
• pp.19-34
• /
• 2023

Due to the intermittency of renewable energy sources, a need to store and transport energy will increase. Hydrogen production through water electrolysis will provide an excellent way to supplement the intermittency of renewable energy sources. While alkaline water electrolysis is currently the most mature technology, it has drawbacks of low current density, large footprint, gas crossover, etc. The PEM water electrolysis has potential to replace the alkaline electrolysis. However, expensive catalyst material used in the PEM electrolysis has been the bottleneck of widespread use. In this review, we have reviewed recent efforts to reduce catalyst loading in PEM water electrolysis. In core-shell nanostructures, the precious metal catalyst forms a shell while heteroatoms form a core. In this way, the catalyst loading can be significantly reduced while maintaining the catalytic activity. In another approach, a corrosion-resistant support is utilized, which provides a stable platform to impregnate precious metal catalyst.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.296-301
• /
• 2017

최근에 저가의 고분자 전해질 연료전지(Proton Exchange Membrane Fuel Cells, PEMFC)용 비불소계 전해질 막 연구 개발이 활발히 진행되고 있다. 본 연구에서는 sulfonated poly (ether ether ketone) (sPEEK) 막의 내구성을 증가시키기 위해 PI 지지체를 이용한 강화 막을 제조하였다. 단일(비강화) 막전극합체(MEA)와 강화막 MEA의 내구성을 시험하기 위해 열화 가속화 기법을 이용하여 MEA 열화 실험을 진행하였다. 열화 전과 후에 I-V 분극곡선, 수소투과도, 전극 활성 면적, 막 저항과 부하 전달 저항을 측정하여 열화 전과 후를 비교하였다. 그 결과, 강화 MEA가 단일 MEA에 비해 수소투과전류밀도가 낮으며, 내구성이 높음을 확인하였다. 특히 열화 후 강화 MEA에서는 단일 MEA에서 나타난 쇼트 현상이 나타나지 않았다.