• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.537-540
• /
• 2009

Bactericidal efficacies of various sanitizers and disinfectants against 10 Bacillus cereus strains isolated from Korean foods and 8 standard B. cereus strains were investigated. The sanitizing capabilities of ethanol, iodine, chloride, quaternary ammonium, hydrogen peroxide, and peroxide acetic acid were investigated using the EN 1276 method based on quantitative suspension testing. The resistance against sanitizers and disinfectants was higher for wild-type than standard strains, and the bactericidal activities decreased in dirty conditions. Ethanol, chlorine, and iodine at the maximum level allowed under Korean food sanitation laws showed a great effectiveness against B. cereus. Hydrogen peroxide at 1,100 ppm showed the lowest bactericidal activity against B. cereus. These results indicate that the legally allowed maximum concentrations of sanitizers and disinfectants in Korea do not reduce all B. cereus strains by at least $5\;{\log}_{10}\;CFU/mL$.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.332-336
• /
• 1990

Antioxidative characteristics of freeze dried soybean sauce powder (SSP) on the oxidation reaction of linoleic acid mixture(LA) were evaluated by the determinations of peroxide formation, synergistic property, hydrogen donation and lipoxygenase activity. SSP was found to possess a considerable potentiality of antioxidant activity on the formation of hydroperoxides in the LA oxidation reaction system at $50^{\circ}C$ for 144hrs. This antioxidative effect was increased by the concentration from 0.02% to 0.5% of SSP in the reaction system. Under the condition of presence of ferric chloride (10 ppm) in the reaction system. appreciable effect of SSP on the synergistic antioxidation were observed. On the other hand, hydrogen donation property of SSP onto ${\alpha},\;{\alpha}'-diphenyl-{\beta}-picrylhydrazyl$ was found and inhibitory ability of SSP on LA oxidation was also shown in the reaction system of lipoxygenase-catalized oxidation.

• Advances in environmental research
• /
• v.3 no.2
• /
• pp.151-162
• /
• 2014

Among the combination of 4 different second metals and 3 different noble metals, Ni 10%-Pd 1%/hematite (Ni(10)-Pd(1)/H) showed best tetrachloroethylene (PCE) removal (75.8%) and production of non-toxic products (39.8%) in closed batch reactors under an anaerobic condition. The effect of environmental factors (pH, contents of Ni and Pd in catalyst, and hydrogen gas concentration) on the reductive dechlorination of PCE by Pd-Ni/hematite catalysts was investigated. PCE was degraded less at the condition of Ni(5)/H (13.7%) than at the same condition with Ni(10)/H (20.6%). Removals of PCE were rarely influenced by the experimental condition of different Pd amounts (Pd(1)/H and Pd(3)/H). Acidic to neutral pH conditions were favorable to the degradation of PCE, compared to the alkaline condition (pH 10). Increasing Ni contents from 1 to 10% increased the PCE removal to 89.8% in 6 hr. However, the removal decreased to 74.2% at Ni content of 20%. Meanwhile, increasing Pd contents to 6% showed no difference in PCE removal at Pd content of more than 1%. Increasing H2 concentration increased the removal of PCE until 4% H2 which was maximumly applied in this study. Chlorinated products such as trichloroethylene, 1,1-dichloroethylene, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, and vinyl chloride were not observed while PCE was transformed to acetylene (24%), ethylene (5%), and ethane (11%) by Ni(10)-Pd(1)/H catalyst in 6hr.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.342-352
• /
• 2020

Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.639-646
• /
• 2007

This study performed several tests for the durability of the concrete coated with nano synthesis ceramics which do not contain volatile organic compounds harmful to environment. The tests were adhesion test on dry and humid concrete, SEM test, MIP analysis, carbonation, chloride diffusion by electronic facilitation, freezing-thawing resistance, alkaline resistance, and brine resistance test. In the adhesion test on dry and humid concrete, nano synthesis ceramics coating produced the highest results among all the coatings tested. Nano synthesis ceramics adhered solidly on the concrete surface. The adhesive strength seemed to result from the hydrogen bond between nano synthesis ceramics which are inorganic and generated by hydrolysis and re-condensation reaction and the concrete's hydrates such as calcium silicate aluminate or calcium silicate hydrate. SEM test and MIP analysis results show surface structure with finest crevices pore in the nano synthesis ceramics coating applied concretes. In the carbonation, chloride diffusion, and freezing-thawing resistance tests, the concretes with nano synthesis ceramics coating indicated the best results. Based on these test results, further progress in application of nano synthesis ceramics coatings to various concrete structures including costal structures and sewerage arrangements can be expected.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.66-79
• /
• 1998

This study purposes to elucidate the characteristics of local water quality and the evolutional process of the spring water have been studied with the samples from 55 selected springs, from the coast region to the Baegrogdam, a caldera lake of Halla mountain in Cheju Island. Results of hydrochemical analyses in the 55 spring water show that Gwaneumsa is pollued with high hydrogen concentration, and spring waters from Yusuarmchun, Jangsumul, Dukjisemmul, Sinch'onk'nmul, Youngchunsa, Woonyangchun, Harwontongmul, Dongheamul, Seakdalsengsu, Andukkyekok, Dotimul, Kinmul, Harkangmul and Jungkeummul are polluted by the pollution sources from the surface surrounding ground. Spring waters of Samyang3suwon, Meungbusa, Sernurungmul, Tosanmul, Jungkeummul, Kwakgimul, Aewolharmul, Konemul and Nokgomul are also polluted from the sea water intrusion. The electrical conductivity, pH and the concentration of nitrate nitrogen and bicarbonate increase when the precipitation increases, but the concentration of sodium, chloride and sulphate decrease when the precipitation increases. The concentrations of potassium, magnessium and calcium are nearly independent of the precipitaion. Quality characteristics of spring water show complicated group of spring water through piper's trilinear diagram. The high mountain region consists of groups of sodium or potassium type and bicarbonate type; the middle mountain region consists of groups of sodium or potassium type and no dominant type; the low mountain consists of groups of no dominant type and sulfate or nitrate type; the coast region consists of groups of sodium or potassium type and chloride type or no dominant type. These characteristics indicate that the spring waters are changed from bicarbonate type in the high and middle mountain regions into non-bicarbonate type in the coastal region, as the precipitated waters flow downslope.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.241-246
• /
• 2003

Numerical simulations are performed at atmospheric pressure in order to understand the effect of additives on flame speed and the NOx formation in freely propagating $H_{2}/O_{2}/N_{2}$ flames with oxygen enrichments. A chemical kinetic mechanism is developed, which involves 26 gas-phase species and 99 reactions. Under several equivalence ratios and oxygen enrichments, flame speeds are calculated and compared with those obtained from the experiments, the results of which is in good agreement. As hydrogen chloride as additive is added into $H_{2}/O_{2}/N_{2}$ flames with low oxygen enrichments, its chemical effect causes the decrease of flame speed, radical concentration, and the NO production rate. It is found that the chemical effect of additive has much more influence on the reduction of EINO than its physical effect. However, in flames with very high flame temperature the physical effect rather than the chemical effect becomes more important on the reduction of EINO.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.46-56
• /
• 2014

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.312-317
• /
• 2019

The objective of this study was to investigate the corrosion behavior of aluminum (AA1100) in a mixed solution of 0 ~ 0.1 g/L Na₂S + 0.3 ~ 3 g/L NaCl + 0 ~ 10 mL/L H₂O₂. Potentiodynamic polarization tests were performed. Effects of solution compositions on corrosion potential, corrosion rate, and pitting potential of aluminum were statistically analyzed with a regression model. Results suggested that localized corrosion susceptibility of aluminum was increased in the solution with increasing concentration of NaCl because the pitting potential was lowered linearly with increasing NaCl concentration. On the contrary, H₂O₂ mitigated the galvanic corrosion of aluminum by increasing the corrosion potential. It also mitigated localized corrosion by increasing the pitting potential of aluminum. Na₂S did not exert a noticeable effect on the corrosion of aluminum. These effects of different chemical species at various concentrations were independent of each other. Synergy or offset effect was not observed.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.3-11
• /
• 2007

It is to review the current status of magnesium smelting. Raw materials for magnesium source, worldwide production and producers of metallic magnesium, Korean magnesium markets and some important extraction technologies were reviewed. The magnesium extraction technologies were described according to the two major reduction methods: the fused salt electrolysis and the thermal reduction method. Also, the research on the extraction of magnesium from magnesite which has been being carried out at KIGAM was briefly introduced with discussing the related topics on the recycling of the chlorine and the hydrogen chloride gas used in the process.