• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.339-349
• /
• 2017

This paper is related to structural design evaluation of 19,000 TEU ultra large container ship, dealing with hydroelastic response, i.e. springing and whipping. It illustrates application of direct calculation tools and methodologies to both fatigue and ultimate strength assessment, simultaneously taking into account ship motions and her elastic deformations. Methodology for springing and whipping assessment within so called WhiSp notation is elaborated in details, and in order to evaluate innovative container ship design with increased loading capacity, a series of independent hydroelastic computations for container ship with mobile deckhouse and conventional one are performed with the same calculation setup. Fully coupled 3D FEM - 3D BEM model is applied, while the ultimate bending capacity of hull girder is determined by means of MARS software. Beside comparative analysis of representative quantities for considered ships, relative influence of hydroelasticity on ship response is addressed.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.83-90
• /
• 2006

Recently, as the technology of utilization for the ocean space is being advanced, floating structures are asked for being mare and mare huge-scale. A very large floating structure(VLFS) is considered as a flexible structure, because of a quite large length-to-breadth ratio and its geometrical flexibility. The main object of this study is to develop an accurate and convenient method on the hydroelastic response analysis of very large offshore structures on the real sea states. The numerical approach for the hydorelastic responses is based on the combination of the three dimensional source distribution methods, the dynamic response analysis method and the spectral analysis method. A model is considered as many rigid bodies connected elastic beam elements. The calculated results shaw good agreement with the experimental and calculated ones by Ohta.

• 대한토목학회논문집
• /
• 제30권3B호
• /
• pp.315-324
• /
• 2010

본 논문에서는 대규모 유탄성 해석을 통해 초대형 부유식 해상구조물의 설계 차트를 개발했다. 초기 설계단계에 본 챠트를 이용해서 고비용의 유탄성 해석을 사용하지 않고도 초대형 부유식 해상구조물의 유탄성 거동을 예측이 가능하다. 본 논문에서는 두 가지 종류의 설계챠트 I, II을 개발하여 제시하였다. 설계차트 I은 특정 주파수의 파랑에 대한 구조물의 최대응력 응답진폭함수를 얻을 수 있도록 개발되었다. 설계차트 I의 경우 동일한 변장비와 무차원 구조강성계수를 갖는 모든 구조물에 적용이 가능하다. 설계챠트 I과 파랑스펙트럼의 적분을 통해 설계차트 II를 개발하였으며, Beaufort 풍력급에 따른 Bretschneider 스펙트럼을 적용해 해상의 환경요인을 고려하도록 구성되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.18-22
• /
• 2000

This paper is transient motions of a very large floating structure subjected to dynamic load induced by wave. A time domain method is applied to the hydroelasticity problems for this purpose. The method is based on source-dipole and FEM scheme and on Newmark $\beta$ method to pursuit time step process taking advantage of the memory effect. The present method is appied to hydroelastic response analysis in regular waves and impact responses due to dropping aircraft.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.43-56
• /
• 1998

A barge-type structure has been recently watched since The Floating Structures Association of Japan proposed the new concept as the most suitable one of floating airports. In this paper, the method, which is based on a combination of a three-dimensional source distribution method and the wave interaction theory is applied to very large floating structure of barge-type. The calculated results show good agreement with the experimental and calculated ones by Yago and remarkable characteristics concerning the hydroelastic behavior of the very large floating structure on the effects of hydrodynamic interactions and choice of body modelling.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.423-448
• /
• 2019

Very Large Floating Structures (VLFS) are one among the solution to pursue an environmentally friendly and sustainable technology in birthing land from the sea. VLFS are extra-large in size and mostly extra-long in span. VLFS may be classified into two broad categories, namely the pontoon type and semi-submersible type. The pontoon-type VLFS is a flat box structure floating on the sea surface and suitable in regions with lower sea state. The semi-submersible VLFS has a deck raised above the sea level and supported by columns which are connected to submerged pontoons and are subjected to less wave forces. These structures are very flexible compared to other kinds of offshore structures, and its elastic deformations are more important than their rigid body motions. This paper presents hydroelastic analysis carried out on an innovative VLFS called truss pontoon Mobile Offshore Base (MOB) platform concept proposed by Srinivasan and Sundaravadivelu (2013). The truss pontoon MOB is modelled and hydroelastic analysis is carried out using HYDRAN-XR^* for regular 0° waves heading angle. Results are presented for variation of added mass and damping coefficients, diffraction and wave excitation forces, RAOs for translational, rotation and deformational modes and vertical displacement at salient sections with respect to wave periods.

• 한국해양공학회지
• /
• 제14권2호
• /
• pp.53-59
• /
• 2000

A numerical method to predict responses of very large floating structures in wave is suggested using source-dipole distribution method. The deflection of the plate is calculated by the finite element method in terms of rigidity matrix of each node. The calculated results for a plate are compared with the experimental ones.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.243-256
• /
• 2022

A coupled finite element method (FEM)-boundary element method (BEM) for analyzing the hydroelastic response of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) floating plates under moving loads is firstly introduced in this article. For that aim, the plate displacement field is described utilizing a generalized shear deformation theory (GSDT)-based FEM, meanwhile the linear water-wave theory (LWWT)-relied BEM is employed for the fluid hydrodynamic modeling. Both computational domains of the plate and fluid are coincidentally discretized into 4-node Hermite elements. Accordingly, the C1-continuous plate element model can be simply captured owing to the inherent feature of third-order Hermite polynomials. In addition, this model is also completely free from shear correction factors, although the shear deformation effects are still taken into account. While the fluid BEM can easily handle the free surface with a lower computational effort due to its boundary integral performance. Material properties through the plate thickness follow four specific CNT distributions. Outcomes gained by the present FEM-BEM are compared with those of previously released papers including analytical solutions and experimental data to validate its reliability. In addition, the influences of CNT volume fraction, different CNT configurations, water depth, and load speed on the hydroelastic behavior of FG-CNTRC plates are also examined.

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.83-92
• /
• 2007

대형의 유체-구조물 연계시스템(FSI) 해석을 위해 많은 수치기법들이 있지만, 유체의 슬로싱에 의해 발생되는 집중적이고 불규칙한 동수압의 영향 때문에, 신뢰할 수 있는 수치 결과와 수치안정성을 확보하기 위해 매우 조밀한 메쉬를 필요로 한다. 그 결과, 신뢰할 수 있는 장기적인 시간 응답을 구하기 위한 수치해석은 상당히 많은 CPU 시간을 요구한다. 본 논문의 목적은 국부 상세 모델을 이용하여 LNG운반선의 화물창 시스템의 유탄성적 거동을 해석하기 위한 전역-국부 해석기법을 제시하고자 한다. 본 논문에서 제시한 해석기법의 타당성을 증명하고 이 기법을 통해 LNG운반선 화물창 시스템의 국부응답을 효율적으로 예측한 결과를 제시하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.53-54
• /
• 2006

Experimental analyses on the Hydroelastic Flow-Structure Interactions on pulsed impinged jet is measured with the FSIMS(Flow-Structure Interaction Measurement System. The nozzle diameter is D=15mm and two major experiments have been carried out for the cases of the distance between the nozzle tip to the elastic wall is 6.0. The pulsed jets were controlled by a solenoid valve and were impinged onto an elastic plate (material: silicon, diameter: 350mm, thickness: 0.5mm, hardness: 15). The Reynolds numbers were 20,000 and 24,000 when the jets were impinged with the volume velocities. The results showed that the elastic plate moved slightly to the opposite direction of the jet direction at the time of valve opening. It has been shown that the vortices travelling over the surface of the wall made the elastic wall distorted locally due to a vector forces between rotating forces of the vortex and a newly-incoming flow.