• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.134-138
• /
• 2014

Power packs can change energy to hydraulic energy generated by an engine as a tool for use with civil engineering construction equipment. This paper determines which type of power pack meets the standards of construction machinery. A power pack was formulated as a three-dimensional model by using the software CATIA. A modal analysis was conducted using ANSYS Workbench, and the resonance was checked. Next, a harmonic analysis was conducted. The analytical results show that the dynamic stability of the power pack is assured.

• 드라이브 ㆍ 컨트롤
• /
• 제2권2호
• /
• pp.35-42
• /
• 2005

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1565-1576
• /
• 2002

By way of driving a 2-way on/off solenoid hydraulic valve with a pulse width modulation (PWM) signal, control of the pressure in a certain volume is frequently used in various applications. However, the pressure built-up according to the duty ratio and carrier frequency of the PWM signal is not so well understood. In order to clarify the characteristics of 2-way valve hydraulic pressure control systems, in this paper two formula fur the mean and ripple of the load pressure were derived through theoretical analysis. And the accuracy of the derived formula were verified by comparison with the experimental test result. Generally 2-way valve systems are constructed as a bleed-off circuit, while 3-way valves are used as a control element in a meter-in circuit pressure control system. In a bleed-off circuit, the system supply pressure from a hydraulic power pack does not remain constant, but changes according to their external load. In turn, the relief valve in the hydraulic power pack reacts accordingly showing complicated dynamic behavior, which makes an analytical study difficult. In order to resolve the problem, simple but accurate empirical dynamic models fer a bleed-off system were used in the course of formula derivation. As the result, selection criteria for two major control parameters of the driving signal is established and the basic strategy to suppress the unnecessary pressure fluctuation can be provided for a hydraulic pressure control system using a 2-way on/off solenoid valve.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.112-119
• /
• 2009

An automatic transmission of construction equipment is controlled by hydraulic and electronic system for doing in various functions like as shifting and operation. The shifting is operated by the engaged and disengaged clutch motion from hydraulic power. On the shifting process, suitable pressure control to the clutch is required for smooth shifting. Hydraulic control system in the automatic transmission is divided by the pilot control type and the direct control type greatly. The direct control type has an advantage than the pilot control type. Because the structure is simple, the design and the manufacture are having less troubles and the system can be maximized precision pressure control. However, the excellent performance proportional control valve should be used to achieve proper control-ability. In this study, the dynamic analysis model composing the automatic transmission and hydraulic system for forklift truck is presented to simulate the characteristics of hydraulic system about the direct control type. That model is verified the validity compared the results of the testing examination. Parameters of input signal are analyzed to reduce the output torque according to input control signal is affected in shifting characteristic.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.94-98
• /
• 2017

고성능 상단엔진 개발을 위한 9톤급 다단연소사이클 엔진의 선행연구가 진행 중에 있다. 다단연소사이클 엔진 기술검증시제(TDM0)를 제작을 완료하여, 나로우주센터 엔진 연소시험설비에서 예연소기와 터보펌프로 구성된 파워팩 연소시험과 주 연소기까지 장착된 엔진 연소시험을 차례로 수행하였다. 다단연소사이클 엔진 유공압 라인의 진공화 과정과 연소시험에서 나타난 터보펌프의 및 유공압 라인의 특성을 간략히 기술한다.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.175-181
• /
• 2023

In offshore plants, various equipments including cranes and davits are used for safety management. Hydraulic cylinder type actuators are mainly used for luffing operations such as cranes and davits. However, in the case of a cylinder using hydraulic pressure, a separate power pack is required to supply hydraulic pressure. When used for a long time, maintenance costs such as sticking of hydraulic valves, contamination of hydraulic oil and deterioration of hydraulic hoses occur. In addition, a lot of hydraulic oil is used in the handling of cranes and davits, which causes marine pollution due to management problems. As a result, as interest in marine pollution prevention has increased recently, interest in actuators that do not use hydraulic pressure is also increasing. Therefore, in this study, we intend to develop a davit with an electric cylinder type actuator that uses electricity rather than hydraulic pressure by the SOLAS regulation. In other words, the conceptual design of the davit driven through the linear motion of the ball screw using electricity is performed, and the structural safety of the drive is also reviewed so that it can be utilized in the industrial field.

• 한국시뮬레이션학회논문지
• /
• 제28권2호
• /
• pp.35-48
• /
• 2019

그간 국내 유압 드리프터는 해외 선진사의 제품을 벤치마킹하여 개발되었지만, 이는 한국형 유압드릴 파워팩 특성(대유량, 저압)에 적합하지 않아 우수한 타격성능을 나타내지 못하였으며, 이로 인해 최적설계에 대한 연구 진행도 미진한 상태였다. 이에 본 연구에서는 대유량을 소화할 수 있도록 용량이 재설계된 유압 드리프터에 대해 다목적함수 최적화를 수행하고, 이를 통해 타격출력 향상과 공급압력 및 서지압력을 감소시키는 것을 목표로 한다. 이러한 연구의 진행방법을 요약하면 다음과 같다. 먼저 타격출력과 공급압력 및 서지압력 개선에 대한 목표를 설정하고 이에 대한 다목적함수 최적화를 수행한다. 이후 최적화된 설계치로 제작된 시제품의 시험결과와 해석모델의 해석결과 비교를 통해 최적화된 해석모델의 신뢰성을 확보한다. 본 연구에서는 유압시스템 해석 소프트웨어인 SimulationX와 다목적함수 최적화 프로그램인 EasyDesign이 사용되었으며, 위와 같은 연구를 통하여 한국형 유압드릴에 적합한 고출력 드리프터 개발 목적에 부합하는 결과를 얻을 수 있었다.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.9-17
• /
• 2019

가스터빈 압축기의 가변정익은 다수의 정익을 동시에 회전시킬 수 있도록 하는 가변정익 링크메커니즘과 이를 동작시키는 구동시스템으로 구성된다. 본 연구에서는 총 3단으로 구성된 가변정익을 2개의 유압구동기로 작동시킬 수 있는 가변정익 구동시스템을 개발하였다. 가변정익의 공력하중과 링크메커니즘 기구분석을 통해 구동기의 요구 성능을 도출하고, 파워팩을 포함한 유압구동시스템을 개발하였다. 부하 시험장치를 이용하여 개발한 구동기의 성능을 평가하였으며, 최적의 제어 이득과 동기제어로직을 적용하여 항공용 가스터빈 시험을 위한 가변정익 구동시스템을 개발 완료하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.71-79
• /
• 2009

The world-wide ship construction market is forecast that the considerable portion of shipbuilding and oceanic plant industry will be transferred consequently in China after 5 or 10 years. This point of view where the Korean ship construction industry seizes the initiative from the world-wide ship construction/oceanic field, we must cultivate technical power of base technology, and focus our interests on the development of core parts. In this study, our proprietary remotely operated valve actuator system with power line technology was developed to enhance the installation and commissioning process by our own technology. This paper describes the new design and functions of the remotely operated valve system for shipbuilding and offshore market especially for FPSO.