• ALGAE
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2004

The purpose of this study is to assess the effects that hydraulic-gun-aerators have on cyanobactedial bloom in Sayeon Dam Reservoir in Ulsan City, Korea. A total of nine hydraulic-gun-aerators are in operation at the reservoir withe 100 m spacing between each aerator to control severe cyanobacterial bloom in the dam reservoir. The field studies were performed an total four times at two sampling stations in the reservoir from July to August in 2001. The standing crops of phytoplankton did not changed significantly by the operation. The cell concentration of the cyanobacteria at the surface layer were reduced about 10%, which is a poor result for the dispersing cyandobacteria deeper into the water. The average surface temperature during the study was reduced by 2.0$^{\circ}C$ by the hydraulic-gun-aerators. The effect of the operation on the vertical distribution of DO concentration was clear. However, the hydraulic-gun-aerators were not expected to have an effect in the lowest layer of the hypolimnion. In the study, it was proposed that installation distance between each hydraulic-gun-aerator would be proper when they are apart about 120 m based on DO depth profiles.

• Journal of Environmental Impact Assessment
• /
• v.16 no.1
• /
• pp.15-26
• /
• 2007

Surface water is the main drinking water source in Korea. Algal bloom caused by phytoplankton in reservoir is common event in every summer season. To prevent or control the algal blooms, artificial circulation system has been adopted in many reservoirs, including Hoengseung reservoir. Total 7 hydraulic-gun-aerators were installed around the intake tower in Hoengseung reservoir since 2000. This study is to elucidate the effects of hydraulic-gun-aerators on phytoplankton bloom, pH, DO, temperature and evaluate the selective withdrawal and vertical distribution of phytoplankton by means of submersible fluorescence probe, which features high correlation with a standard ISO method (r=0.90, P<0.0001) for chlorophyll-a quantification.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.183-189
• /
• 2005

A modeling of a hydraulic-gun-aerator is proposed to set up a design procedure for such devices. The aerators are used to destroy any thermal stratification that are responsible for the degradation of water qualify of lakes. The aerator produces ascending flow by using air bubbies released instantly near the bottom of the lake into a cylindrical pipe installed vertically. Differently form the diffuser-aerators, they can pull up the cold, oxygen depleted water directly to the region of the free surface, and they are believed to work effectively especially for relatively deeper lakes. Their design procedure has not been established yet though, and we propose a model focusing on the exit flow velocity at the top of the aerator through the examination of presently operating devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.718-723
• /
• 1992

A hydraulic gun/turret servo system requires fast and robust controller performance because of severe operating condition and precise target tracking objective. Digital controllers are able to satisfy this requirement due to high speed electronic device. The purpose of this study is to compare with pre-EPU with new-designed optimal, adaptive controllers by simulating nonlinear hydraulic simulation program. The designed digital controller shows good tracking performance and robustness to disturbance.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.46-52
• /
• 2008

Lately Gun-Jang Harbor has undergone a drastic change in hydraulic characteristics due to newly added harbor protection measures, like a wharf and breakwater. The wharf and breakwater, with a training dike, were constructed to keep enough depth far navigation. They make the plan view of Gun-Jang Harbor semi closed and very elongated, which makes it very vulnerable to seiche. Hence it is an urgent task to unveil the hydraulic characteristics, like seiche, for the optimal operation of the new harbor system. In this study, we numerically analyze the seiche characteristics of Gun-Jang Harbor over the $10-4{\sim}10-3$ Hz frequency range, considering that wind waves due to seasonal winds are the most prevailing during winter in the West sea. As a wave driver, we use Mild Slope Eqs. and numerically integrate these using FEM based on Galerkin weak formulation. It turns out that the 1st, 2nd, 3rd and 4th eigen models are over 0.0009 Hz, 0.0013 Hz, 0.0017 Hz and 0.002 Hz.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.159-167
• /
• 2014

In this study the process of normalizing hydraulic head loss rate was developed for the purpose of estimation of seepage blocking state at each seepage segment in sea dike embankment. Pore water pressure sensors were installed with some interval along seepage path, then the hydraulic head loss rate at each segment between pore water pressure sensors was calculated, and then the calculated hydraulic head loss rate was normalized based on seepage path length. The comparison of normalized hydraulic head loss rates showed that the cross section of sea dike embankment was homogeneous approximately and the width of cross section was long enough to blocking tide water.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.171-176
• /
• 2008

Active suspension controls stiffness and damping between unsprung mass and sprung mass in order to increase the ride quality. However, to increase the riding quality, the handling quality should be decreased and the rattle space should be increased. So, active suspension should cope with these conflict conditions. Therefore its actuating devices have to produce sufficient actuating force and have sufficiently short response time. In this paper, the dynamic characteristics of 1/4 car model with an active suspension is studied according to hydraulic design variables. The active suspension consists of a hydraulic servo valve and a hydraulic cylinder. It shows better performance when it has more powerful and faster actuator.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.1-9
• /
• 2014

In this study the pore water pressures were measured in sea dike constructed with the sand dredged in the sea, and they were analyzed with the hydraulic head loss rate to estimate quantitatively the state of blocking seepage in the sea dike embankment. Blocking state was expressed as the number between 0 and 1. the number of 1 means the state of perfectly blocking seepage and the number of 0 means the state of sea water being passing free. The deeper the installed position was the lower the hydraulic head loss rate was and the longer the seepage path length was the higher the hydraulic head loss rate was. The estimated R-squareds were close to 1, which means that the embankment was steady state without movement of soil particles.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.3
• /
• pp.39-46
• /
• 2014

Hydraulic conductivity is an important parameter, representing permeable property of the groundwater in aquifers, in the issues of groundwater development, groundwater contamination, and groundwater flow, etc. We estimated a relationship between hydraulic conductivity and electrical properties (formation factor, chargeability, and time constant) of silty sand in the laboratory. For this study, we conducted grain size analysis, constant head permeameter test, and measured electrical resistivity and spectral induced polarization of silty sand samples collected from the riverside alluvium of the Nakdong River in Nogok-ri area, Dasan-myeon, Goryeong-gun in Gyeongbook Province, Korea. In the laboratory test, we used soil samples of approximately uniform porosity with 0.5% error range, and kept the electrical resistivity of pore water with 100 ohm-m. As a result, the relationship between effective particle size and hydraulic conductivity agrees fairly well with the existing empirical formulas. Hydraulic conductivity was correlated with formation factor, chargeability, and time constant: hydraulic conductivity increased with increasing formation factor and time constant as well as with decreasing chargeability.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.10
• /
• pp.96-102
• /
• 2006

This paper presents the mechanics of the link of a double-action link-type hydraulic die set for the enclosed die forging. Operational principle of the die set in the enclosed die forging is introduced with emphasis on force transmission from the press and the hydraulic system to the material through links, die components and punches. The force exerted on the link is statically investigated and its structural analysis is carried out. The analyzed results are discussed to be used for design of the link system.