• 한국수자원학회논문집
• /
• 제48권3호
• /
• pp.149-158
• /
• 2015

비상방류시설은 안전한 댐 운영 및 유지관리를 위해서 절대적으로 필요한 시설임에도 불구하고 국내 댐의 경우 이를 고려한 설계가 이루어지지 않아 각 댐의 비상방류 대응 적정성을 판단하기 곤란한 상황이다. 특히 국내 댐의 경우 비상방류시설규모를 산정하는 기준이 일정치 않을 뿐만 아니라 대부분의 용수댐은 별도의 방류시설 조차도 없는 실정이다. 따라서 본 연구에서는 기존댐 방류시설 현황 분석, 국내외 비상방류시설 설계기준 등의 검토와 함께 국내 댐설계기준을 적용한 가상 댐체와 수어댐을 대상으로 수위에 따른 방류능 분석을 수행하였다. 또한 SEEP 프로그램 등을 활용, 수위저하 속도에 따른 제체의 사면 안정성을 검토함으로써 비상방류 시설의 적정규모 산정기준을 제시하고자 하였다. 이를 위하여 수리학적 해석을 통해 저류수심에 따른 제체에 작용하는 힘을 분석하였으며 수위저하 속도 변화에 따른 제체의 안정성을 검토하여 허용수위저하 속도 범위를 제시하였다. 수위 25% 저감은 하중을 50%까지 감소시켜 초기수위 저감이 중요한 것을 알 수 있었다. 가상 댐체는 물론 수어댐에 수위저하 속도 1 m/일을 적용하더라도 제체의 안전성은 보장됨을 확인하였다. 다만, 방류능과 방류 소요일수는 수위별 저류용량 등 저류지 특성과 밀접한 관계가 있어 초기대응을 위해서는 7~10일 이내에 저류수심의 25%를 먼저 방류시키고 나머지 방류량은 1~2개월 이내에 방류할 것을 제안하였다.

• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.563-572
• /
• 2006

현재 해안구조물의 설계시에는 현지관측을 토대로 한 Goda식(Goda, 1974)과 같은 경험식이나 2차원적인 수리수치모형실험을 통한 파력값을 많이 사용하고 있다. 하지만, 이러한 2차원 해석결과들은 실해역에 설치된 구조물의 평면배치형상에 따라 변화하는 작용파력의 3차원 구조를 재현하기에는 무리가 있는 듯 하다. 특히, 혼성방파제와 같은 대형구조물의 항외측과 항내측에서 위상차가 발생하는 경우에는 구조물의 단면별로 파력이 각기 다르게 작용할 것으로 판단된다. 본 연구에서는, 해안구조물에 작용하는 파력의 3차원구조를 명확히 하기 위하여, 투과성구조물 및 쇄파현상에도 적용이 가능한 기존의 수치해석기법(Hur and Mizutani, 2003)에 Large Eddy Simulation(LES)기법을 도입한 새로운 3차원 수치해석기법을 제안하였으며, 이 기법을 이용하여 얻어진 잠제상 구조물에서의 작용파력 계산치를 기존의 수리모형실험치와 비교한 결과, 좋은 일치성을 확인하였다. 또한, 대형해안구조물 중 혼성방파제를 본 연구의 대상구조물로하여, 사석마운드로의 투과 및 개구부로의 회절의 영향으로 인해 발생하는 위상차를 고려한 3차원 파력구조에 관해 논의하였으며, 2차원 해석으로는 규명할 수 없었던 3차원적인 동적 파력특성을 파악할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제18권4호
• /
• pp.517-539
• /
• 2004

Many types of passive control devices have been recognized as effective tools for improving the seismic resistance of structures. A lot of past research has been carried out to study the response of structures equipped with energy-absorbing devices by assuming that the behavior of the beam-column systems are linearly elastic. However, linear theory may not be adequate for beams and columns during severe earthquakes. This paper presents the results of research on the nonlinear responses of structures with and without added passive devices under earthquakes. A new material model based on the plasticity theory and the two-surface model for beams and columns under six components of forces is proposed to predict the nonlinear behavior of beam-column systems. And a new nonlinear beam element in consideration of shear deformation is developed to analyze the beams and columns of a structure. Numerical results reveal that linear assumption may not be appropriate for beams and columns under seismic loadings, especially for unexpectedly large earthquakes. Also, it may be necessary to adopt nonlinear beam elements in the analysis and design process to assure the safety of structures with or without the control of devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.423-427
• /
• 2003

In this paper, it is to development of brake system with ABS function for aircraft. The test of brake system is required before applying on aircraft. The real-time dynamic simulator with 5-D.O.F. aircraft dynamic model is developed for braking performance test of ABS (Anti-skid Brake System) control h/w with anti-skid brake functions. The dynamic simulator is real-time interface system that is composed of dynamic simulation parts, master control parts, digital and analog in/out interface parts, and user interface parts. The 5-D.O.F. aircraft dynamic model is composed of a big contour and a little contour by simulation s/w. The big contour represents the interactions of forces in airframe, nose and main landing gear, and engines on the center of gravity. The little contour represents interactions of wheel, braking units, hydraulic units and a control unit. ABS control h/w unit with ABS control algorithm is also developed and is tested with simulator under the some conditions of gripping coefficient. We have known that ABS control h/w unit on wet or snowy runway as well as dry runway very well protects wheel skid.

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.323-359
• /
• 2015

This paper presents an elasto-plastic model for determination of the ground response curve of a circular underwater tunnel excavated in elastic-strain softening rock mass compatible with a nonlinear Hoek-Brown yield criterion. The finite difference method (FDM) was used to propose a new solution to calculate pore water pressure, stress, and strain distributions on periphery of circular tunnels in axisymmetric and plain strain conditions. In the proposed solution, a modified non-radial flow pattern, for the hydraulic analysis, is utilized. To evaluate the effect of gravitational loads and variations of pore water pressure, the equations concerning different directions around the tunnel (crown, wall, and floor) are derived. Regarding the strain-softening behavior of the rock mass, the stepwise method is executed for the plastic zone in which parameters of strength, dilatancy, stresses, strains, and deformation are different from their elasto-plastic boundary values as compared to the tunnel boundary values. Besides, the analytical equations are developed for the elastic zone. The accuracy and application of the proposed method is demonstrated by a number of examples. The results present the effects of seepage body forces, gravitational loads and dilatancy angle on ground response curve appropriately.

• 한국추진공학회지
• /
• 제10권4호
• /
• pp.34-39
• /
• 2006

두께가 얇고 길이가 긴 튜브 제품을 생산하기 위한 방법으로 유동성형 공정이 많이 이용되고 있으며 이는 다른 가공방법에 비해 성형력이 작고 유동성형에 의해 가공된 제품의 기계적인 강도가 우수하기 때문이다. 특히 유동성형은 로켓 모터 케이스, 연소기, 유압 실린더 그리고 고압용기 등과 같은 고정밀도의 두께가 얇은 실린더 제품을 생산하기 위한 적합한 공정이다. 본 논문에서는 3개의 롤러를 가지는 전후방 유동성형에 대한 유한요소해석을 통해 가공깊이와 가공속도가 성형력에 미치는 영향을 살펴보았다. 다양한 가공깊이와 가공속도 조건에서 얻어진 전후방 유동성형에서의 축방향과 반경방향의 성형력을 비교하였다.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.49-55
• /
• 2014

This paper examines the effects of spring characteristics and stiffness in relation to the characteristics of hydrodynamic force. Spring forces and stiffness determine the performance of this type of pan check valve and have an effect on the overall operation. The hydraulic efficiency of the pan check valve is relatively low compared to that of a common check valve. However, a pan check valve is structurally more stable than a common check valve. We implemented the optimum design to increase the flow rate and to resolve the suppression of the pressure drop according to the extent of the compression of the spring. From the results of a flow analysis, we demonstrate spring stiffness design criteria depending on the extent of the compression of the spring of pan check valve acting on the fluid at the inlet 1 MPa pressure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.193-200
• /
• 2003

This paper presents a hybrid (i.e., integrated passive-active) system for seismic response control of a cable-stayed bridge. Because multiple control devices are operating, a hybrid control system could alleviate some of the restrictions and limitations that exist when each system is acting alone. Lead rubber bearings are used as passive control devices to reduce the earthquake-induced forces in the bridge and hydraulic actuators are used as active control devices to further reduce the bridge responses, especially deck displacements. In the proposed hybrid control system, a linear quadratic Gaussian control algorithm is adopted as a primary controller. In addition, a secondary bang-bang type (i.e., on-off type) controller according to the responses of lead rubber bearings is considered to increase the controller robustness. Numerical simulation results show that control performances of the hybrid control system are superior to those of the passive control system and slightly better than those of the fully active control system. Furthermore, it is verified that the hybrid control system with a bang-bang type controller is more robust for stiffness perturbation than the active controller with μ-synthesis method and there are no signs of instability in the overall system whereas the active control system with linear quadratic Gaussian algorithm shows instabilities in the perturbed system. Therefore, the proposed hybrid protective system could effectively be used to seismically excited cable-stayed bridges.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.871-888
• /
• 2012

This paper aims at presenting the state of the art, the recent progress, and the perspective for the future, in the modelling of two-phase flow in the horizontal legs of a PWR. All phenomena relevant for safety analysis are listed first. The selection of the modelling approach for system codes is then discussed, including the number of fluids or fields, the space and time resolution, and the use of flow regime maps. The classical two-fluid six-equation one-pressure model as it is implemented in the CATHARE code is then presented and its properties are described. It is shown that the axial effects of gravity forces may be correctly taken into account even in the case of change of the cross section area or of the pipe orientation. It is also shown that it can predict both fluvial and torrential flow with a possible hydraulic jump. Since phase stratification plays a dominant role, the Kelvin-Helmholtz instability and the stability of bubbly flow regime are discussed. A transition criterion based on a stability analysis of shallow water waves may be used to predict the Kelvin-Helmholtz instability. Recent experimental data obtained in the METERO test facility are analysed to model the transition from a bubbly to stratified flow regime. Finally, perspectives for further improvement of the modelling are drawn including dynamic modelling of turbulence and interfacial area and multi-field models.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2151-2158
• /
• 2000

This paper presents vibration control performance of a passenger vehicle installed with the mixed-mode type ER engine mounts. The performance is evaluated via hardware-in-the-loop-simulation(HILS) method. As a first step, a dynamic model of a vehicle featuring the ER engine mounts is formulated by taking into account the engine excitation forces. A new type of the fuzzy skyhook controller is then established in order to control both engine and body vibrations. This is accomplished by adopting a weighting parameter between two performance criteria which is to be determined from the fuzzy algorithm. Vertical displacement and acceleration of the engine mount obtained from the HILS method are provided in the frequency domain. In addition, vibration control performance between the conventional hydraulic engine mount and the proposed engine mount is compared in the time and frequency domains.