• 한국결정성장학회지
• /
• 제11권6호
• /
• pp.269-273
• /
• 2001

MgO를 기질로 한 세라믹스 시편에 $TiO_2$를 소량 첨가하고 $1450^{\circ}C$에서 열처리한 후 $TiO_2$를 첨가한 MgO 세라믹스의 수분에 대한 수화 반응에 미치는 영향을 조사하였다. $TiO_2$를 첨가하지 않은 MgO 세라믹스는 수분에 대한 수화반응에 의한 $Mg(OH)_2$의 생성으로 인한 질량변화가 관찰되었으나, $TiO_2$를 첨가함 MgO 세라믹스는 수분첩촉시간에 따른 질량변화가 관찰되지 않았다. $TiO_2$를 첨가한 MgO 세라믹스를 $1450^{\circ}C$에서 열처리했을 때, $Mg_2TiO_4$ 상이 관찰되었으며 특히 TiO$_2$를 첨가함에 따라 부피비중은 첨가량에 비례하며 증가한 반면에 가공율과 흡수율은 감소하는 경향을 나타내었다. 따라서 MgO 를 기질로 한 세라믹스에 $TiO_2$를 소량 첨가한 경우 표면에서 발생하는 수화 반응에 대하여 높은 저항성을 가짐을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제3권4호
• /
• pp.301-306
• /
• 2015

이 연구에서는 해양 콘크리트의 균열저항성 및 내구성을 향상시킨 고성능 해양 콘크리트 개발 연구의 일환으로 광물질 혼화재를 혼입한 콘크리트의 강도, 수화발열 특성 및 염해저항성에 대한 해석적 평가를 실시하였다. 고로슬래그와 플라이애시를 광물질 혼화재로 검토하였으며, 고로슬래그 치환율은 70%까지 플라이애시 치환율은 40%까지 검토하였다. 해석검토 결과, 고로슬래그 및 플라이애시 치환은 모두 압축강도를 크게 저하시키는 결과를 보였으며, 수화발열 특성에서는 고로슬래그는 영향이 적은 반면, 플라이애시는 수화발열량 저감에 크게 효과가 있는 것으로 나타났다. 염소이온 침투 특성에서는 고로슬래그는 침투저항성을 증대시키는 반면, 플라이애시는 저하시키는 경향을 보였다. 해석적 평가를 통해 수화열과 염해내구성을 동시에 고려할 경우, 적절한 양의 고로슬래그와 플라이애시를 함께 사용한 3성분계 시멘트 배합 구성이 효과적일 것으로 판단된다.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.414-420
• /
• 2015

Concrete undergoes significant phase changes from liquid to solid states as hydration progresses. These phase changes are known as the setting process. A liquid state concrete is electrically conductive because of the presence of water and ions. However, since the conductive elements in the liquid state of concrete are consumed to produce non-conductive hydration products, the electrical conductivity of hydrating concrete decreases during the setting process. Therefore, the electrical properties of hydrating concrete can be used to monitor the setting process of concrete. In this study, a parameter identification method to estimate electrical parameters such as ohmic resistance of concrete is proposed. The effectiveness of the proposed method for monitoring the setting process of concrete is experimentally validated.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.289-297
• /
• 2022

Deterioration in durability of structures due to the steel corrosion is difficult to determine whether or not corrosion is initiated and how much propagated, and moreover, repair and maintenance are not easy to deal with. Therefore, preventive treatments can be the best option to avoid the deterioration. Various methods for preventing corrosion of steel, such as electrochemical treatments, anti-corrosion agents and steel surface coatings, are being developed, but economic and environmental aspects make it difficult to apply them to in-situ field. Thus, the purpose of this study was to improve corrosion resistance by using CA-based clinker that are relatively simple and expected to be economically profitable Existing CA-based clinkers had problems such as flash setting and low strength development during the initial hydration process, but in order to solve this problem, CA clinker with low initial reactivity were used as binder in this study. The cement paste used in the experiments was replaced with CA₂ clinker for 0%, 10%, 20%, and 30% in OPC. And the mixture used in the chloride binding test for the extraction of water-soluble chloride was intermixed with Cl- 0.5%, 1%, 2%, and 3% by weight of binder content. To evaluate characteristic of hydration heat evolution, calorimetry analysis was performed and simultaneously chloride binding capacity and acid neutralization capacity were carried out. The identification of hydration products with curing ages was verified by X-ray diffraction analysis. The free chloride extraction test showed that the chlorine ion holding ability improved in order OC 10 > OC 30 > OC 20 > OC 0 and the pH drop resistance test showed that the resistance capability in pH 12 was OC 0 > OA 10 > OA 20 > OA 30. The XRD analyses showed that AFm phase, which can affect the ability to hold chlorine ions, tended to increase when CA₂ was mixed, and that in pH12 the content of calcium hydroxide (Ca(OH)₂), which indicates pH-low resistance, decreased as CA₂ was mixed

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.156-161
• /
• 2006

Impedance spectroscopy was applied to the initial hydration of calcium phosphate bone cements in order to investigate the electrical/dielectric properties. Hydration or equivalently setting was monitored as a function of the amount of water and initial powder characteristics. Higher amounts of water produced more open microstructures, leading to higher conductivity and enhanced dielectric constant. The effects of the initial characteristics in the powder were investigated using bone cement powder prepared with and without granulation. Granulated powder exhibited a significant change in resistance and produced a higher dielectric constant than those of conventional powder. Through a simplified modeling, the effects of thickness in reaction products and pore sizes were estimated by the frequency-dependent impedance measurements. Furthermore, impedance spectroscopy was proven to be a highly reliable tool for evaluating the continuous change in pore structure occurring in calcium phosphate bone cements.

• Advances in concrete construction
• /
• 제8권4호
• /
• pp.311-320
• /
• 2019

In this study, the effect of cellulose nanocrystals (CNCs) on the fire resistance properties of fiber-reinforced cement composites was investigated. The main variables were CNCs content (0.4, 0.8 and 1.2vol.% compared with cement), steel fiber ratio, and exposure temperature (100, 200, 400, 600 and 800℃). The fire resistance properties, i.e., residual compressive strength, flexural strength, and porosity, were evaluated in relation with the exposure temperature of the specimens. The CNCs suspensions were prepared to composited dispersion method of magnetic stirring and ultra-sonication. CNCs are effective for increasing the compressive strength at high temperatures but CNCs do not seem to have a significant effect on flexural reinforcement. Porosity test result showed CNCs reduce the non-hydration area inside the cement and promote hydration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.345-351
• /
• 1996

The study on the properties of low-heat cement that hear of hydration is relatively lower than that of ordinary portland cement and concrete made of this low-hear cement has been performed to test the hear of hydration and compressive strength, chemical resistance of concrete using low-hear cement to compare with concrete using other several typers of cements.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.139.2-139
• /
• 2003

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.99-107
• /
• 2002

임피던스 측정법은 시멘트 페이스트의 수화 진행 시 미세구조의 연속적인 변화를 분석하는데 유용한 수단으로 이용되어 왔다. 본 실험에서는 고로슬래그의 첨가량과 분말도를 달리하여 보통 포틀랜드 시멘트에 첨가한 후 나타나는 페이스트의 초기 수화거동을 임피던스 측정법을 이용하여 관찰하였다. 고로 슬래그가 시멘트에 치환 첨가되면, 수화 초기에는 $R_{t (s+1)}$(고상과 액상에 의한 저항)과 $R_{t(int)}$의 증가폭이 감소하였다. 이것은 고로 슬래그를 포함한 시멘트의 수화가 초기재령에서는 늦게 진행되고 있음을 보여준다. 고로 슬래그의 첨가량이 증가할 수록 $R_{t(s+1)}$이 감소하였으며, 수화 72시간에 출현하는 반원의 직경, $R_{t(int)}$ 역시 고로 슬래그의 첨가량이 증가할 수록 감소하고 있다. 그러나, 첨가된 고로 슬래그의 분말도가 클수록 수화 초기부터 $R_{t(s+1)}$과 $R_{t(int)}$의 수치가 증가하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.27-32
• /
• 2002

In this research influences of type and concentration of alkali activator and curing condition on the hydration, and properties of alkali activated blast furnace slag(AAS) concrete were investigated. Sodium carbonate and sulfate were used as alkali activators and their concentration were 4~10 weight percent with Na$_2$O equivalent to binder. The curing conditions were standard curing using 23$^{\circ}C$ water and activated curing chamber at $65^{\circ}C$. Results show that in case of sodium carbonate addition high early strengths were gained by activation of early hydration, but later strength gained was slight. On the other side sodium sulfate strengths were continuously increased with adding amount and ages. Steam curing activated early hydration so that early strengths were improved but later strengths were similar to standard curing. The strength reduction of AAS mortar with sodium sulfate was less than OPC mortar in 5% sulfuric acid solution so that AAS concrete can be useful for acid-resistance concrete.