• Parasites, Hosts and Diseases
• /
• v.57 no.4
• /
• pp.359-368
• /
• 2019

In this study, we carried out extensive in vitro studies on various concentrations of tioxolone along with benzoxonium chloride and their niosomal forms against Leishmania tropica. Niosomes were prepared by the hydration method and were evaluated for morphology, size, release study, and encapsulation efficiency. This study measured leishmanicidal activity against promastigote and amastigote, apoptosis and gene expression levels of free solution and niosomal-encapsulated tioxolone along with benzoxonium chloride. Span/Tween 60 niosome had good physical stability and high encapsulation efficiency (more than 97%). The release profile of the entrapped compound showed that a gradual release rate. The combination of niosomal forms on promastigote and amastigote were more effective than glucantime. Also, the niosomal form of this compound was significantly less toxic than glucantime ($P{\leq}0.05$). The flowcytometric analysis on niosomal form of drugs showed that higher number of early apoptotic event as the principal mode of action (89.13% in $200{\mu}g/ml$). Also, the niosomal compound increased the expression level of IL-12 and metacaspase genes and decreased the expression level of the IL-10 gene, which further confirming the immunomodulatory role as the mechanism of action. We observed the synergistic effects of these 2 drugs that induced the apoptotic pathways and also up regulation of an immunomodulatory role against as the main mode of action. Also, niosomal form of this combination was safe and demonstrated strong anti-leishmaniasis effects highlights further therapeutic approaches against anthroponotic cutaneous leishmaniasis in future planning.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.485-492
• /
• 2019

In this study, the effect of moisture conditions of recycled coarse aggregates on the compressive strength of concrete was evaluated with the water/binder ratios and the curing conditions. The saturated recycled aggregates seemed to have the negative effect on the strength development of concrete. This is the because of the decrease in bond strength between aggregate and cement paste due to the increase of surface water according to the high absorption of recycled aggregates. The effect of types and moisture conditions of aggregates according to the change of water/binder ratio was similar. However, the curing conditions had a significant effect on the compressive strength of the concrete with the different types of aggregates. In the case of curing in air, the recycled aggregates with high absorption reduced the moisture required for hydration and increased the rate of vaporizing, and these result in interfering strength development. The moisture conditions of the recycled aggregates have a considerable effect on the compressive strength of the concrete, and it is necessary to control the moisture conditions of aggregates in the production of concrete with recycled coarse aggregate. And the control of the curing condition is very important for the concrete with recycled aggregate.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1773-1778
• /
• 2020

This study evaluated the skin improvement effect and feeling of use of a temperaturesensitive hydrogel mask pack containing an hyaluronic acid. Ten women in their 30s to 40s who met the selection criteria were tested. The hydrogel mask pack was applied 3 times a week for 4 weeks, and moisture, oil, and skin tone were measured. As a result, skin moisture content increased by 11.3% after one application and 58.36% after 4 weeks of use, showing a very high rate of moisture increase. The oil content increased by 67% after one use, and after that, an appropriate amount of oil was maintained. Did not increase any more. Skin tone increased after 4 weeks. After 4 weeks, evaluation of application feeling and sensory efficacy obtained 87.6% of positive results. As a result of the above, the temperature-sensitive hydrogel mask pack helps to improve the skin and has an excellent feeling of use.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.557-562
• /
• 2022

Hyaluronic acid (HA) is a mucopolysaccharide, occurring naturally in living organisms. It is one of the most hydrophilic molecules, so it has been known as being related to skin hydration and skin aging. The purpose of this study was to examine the effects of Cimicifuga heracleifolia ethanol extract on the hyaluronic acid synthesis and the inhibition of hyaluronidase activity. To determine cytotoxicity, hyaluronic acid synthase 2 (HAS2) gene expression, HA production and, hyaluronidase inhibitory effects, 3-(4,5-dimethylthiazol-2-ly)-2,5-diphenyl tetrazolium bromide (MTT) assay, real time - polymerase chain reaction (RT-PCR), hyaluronic acid enzyme linked immunosorbent assay (HA-ELISA), and hyaluronidase assay were used, respectively. When the Cimicifuga heracleifolia extract was treated in the HaCaT cells up to 500 ㎍/mL concentration, cytotoxicity was confirmed by the Cimicifuga heracleifolia extract at concentrations above 200 ㎍/mL. Therefore, the optimum concentration of all experiments used in this study was determined to be 200 ㎍/mL. HAS2 gene expression increased by Cimicifuga heracleifolia extract in a concentration-dependent manner at all treatment concentrations. The production rate of HA was tended to decrease at the highest concentration of 200 ㎍/mL. The hyaluronidase activity inhibition effect of Cimicifuga heracleifolia extract was very high compared to the control group. Based on these results, Cimicifuga heracleifolia extract was expected to have a moisturizing effect on human skin and special attention should be paid to the determination of the concentration of Cimicifuga heracleifolia when developing cosmetic materials using it.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.276-281
• /
• 2023

Water pipes manufactured using existing Portland cement suffer from the problem of rapid deterioration and reduced durability due to the hydration product of cement being vulnerable to acids. Therefore, in this study, water pipes were manufactured using slag and fly ash, which are industrial by-products from various industries, and their characteristics were analyzed. As a result of the experiment, slump in unhardened concrete tended to increase due to the ball bearing action of fly ash, and the amount of air was reduced due to unburned coal, indicating that measures for frost resistance were needed. In addition, the initial strength of the compressive strength was increased through steam curing, and the results were equal to or better than OPC when mixing more than 50 % of slag. The acid resistance results showed that the mass reduction rate was less than 5 %, showing excellent durability performance, and the bending failure load of the water pipe also exceeded the KS standards, so it is judged to be commercializable.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.341-348
• /
• 2023

In this study, basic skin characteristic data was measured by measuring skin hydration, skin sebum secretion rate, skin melanin index, skin redness index, skin redness image analysis, transepidermal water loss (TEWL), and amount of stratum corneum before and after creating a temporary high temperature and low humidity environments targeting Korean women in their 20s to 50s. Stratum corneum by tape stripping was collected at each measurement and skin biomarkers including total protein content, carbonylated protein, neutral lipid, and lipid peroxidation were analyzed. Based on the results, the differences before and after creating a high temperature and low humidity environments were confirmed, the correlation between skin characteristics and skin biomarkers was confirmed, and a new skin index was created based on this. The new skin index can be used in product efficacy evaluation, and the possibility of constructing a new clinical study method and using skin biomarker discovery research through additional research was confirmed.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2024

In-situ carbonation technology represents a form of mineral carbonation that integrates CO₂ into the fabrication process of cementitious construction materials, capturing CO₂ as calcium carbonate(CaCO₃) through a reaction between calcium ions(Ca²⁺) and CO₂ released during cement hydration. This investigation examines the application of in-situ carbonation technology to a variety of floor dry cement mortar formulations commonly used in local construction projects. It assesses the effects of varying the CO₂ injection flow rate and total volume of CO₂ injected. Additionally, the study evaluates the impact of reducing the quantity of cement used as a binder on the final product's quality.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.2
• /
• pp.89-99
• /
• 2001

Purpose: In this study, we developed a new software tool for the analysis of renal scintigraphy which can be modified more easily by a user who needs to study new clinical applications, and the appropriateness of the results from our program was studied. Materials and Methods: The analysis tool was programmed with IDL5.2 and designed for use on a personal computer running Windows. For testing the developed tool and studying the appropriateness of the calculated glomerular filtration rate (GFR), $^{99m}Tc$-DTPA was administered to 10 adults in normal condition. In order to study the appropriateness of the calculated mean transit time (MTT), $^{99m}Tc-DTPA\;and\;^{99m}Tc-MAG3$ were administered to 11 adults in normal condition and 22 kidneys were analyzed. All the images were acquired with ORBITOR. the Siemens gamma camera. Results: With the developed tool, we could show dynamic renal images and time activity curve (TAC) in each ROI and calculate clinical parameters of renal function. The results calculated by the developed tool were not different statistically from the results obtained by the Siemens application program (Tmax: p=0.68, Relative Renal Function: p:1.0, GFR: p=0.25) and the developed program proved reasonable. The MTT calculation tool proved to be reasonable by the evaluation of the influence of hydration status on MTT. Conclusion: We have obtained reasonable clinical parameters for the evaluation of renal function with the software tool developed in this study. The developed tool could prove more practical than conventional, commercial programs.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.50-57
• /
• 2010

Ternary blended concrete(TBC), which contains both fly ash and granulated blast furnace slag, has an initial cost effective and is environment friendly. Furthermore, it has a lot of technical advantages such as the improvement of long term compressive strength, high workability, and the reduction of hydration heat. However, as the use and study on the performance of ternary blended concrete is limited, it is low short term compressive strength. This study was performed to evaluate the characteristics which are a long and short term compressive strengths, permeability and chemical attacks resistance of hardened high early concrete containing slag powder and fly-ash using high early strength cement(HE-TBC). Replacement rate of FA is fixed on 10% and replacement rate of slag powder are 0%, 10%, 20% and 30%. The test results showed that compressive and flexural strength of HE-TBC increased as the slag contents increased from 0% to 30% at the short term of curing. The permeability resistance of HE-TBC(fly ash 10%, blast 30%) was extremely good at the short and long terms. However, high early strength ternary blended concrete had weak on carbonation of chemical attack.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.228-234
• /
• 2003

Various hydration treatments have been devised to improve the rate and univormity of seed germination as well as seed viability. Hydropriming and priming, the imbibitaion of seeds in distilled water and osmotic solutions, respectively, are useful techniques for early establishment of uniform seedlings. In this study, the optimum conditions were determined for hysropriming of cucumber seeds. Effects of hydropriming were also compared to those of osmotic priming. Seeds, hydroprimed with distilled water and primed with 50 mM $NaNO_3$at 20 for 24 hour, showd shorter number of days required to reach 50% of the final germination percentage ($T_{50}$), and mean number of days to germinate (MDG) that those untreated seeds. Hydroprimed with 10 mL distilled water showed better results in improving the rate of germination thatn other treatments tested. Hydropriming of the aged seeds improved germination percentage at 15$^{\circ}C$ and 25$^{\circ}C$. The $T_{50}$ and MDG values were reduced significantly by hydropriming of the aged seeds regardless of germination temperature. In addition to being simple and inexpensive, the hydropriming resulted in early germination at low temperature. he hydropriming was also effective in increase of germination percentage and normal seedlings.