• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.123-127
• /
• 2005

EVA Powder modified high strength concretes were prepared by varying polymer/binder mass ratio with a constant water/binder mass ratio of 0.3. The effect of EVA powder on the slump, hydration heat, compressive and flexural strength, toughness and water absorption ratio was studied. In hydration heat test, temperature of hydration reaction displayed almost fixed level regardless of containing rate of EVA powder, but peak time of hydration reaction displayed late inclination as containing rate of powder increases. With the same water/binder mass ratio, the compressive strength and water absorption of EVA powder modified concretes decreased slightly when EVA powder was added and the flexural strength of EVA powder modified concretes rised slightly when EVA powder was added. Also, the toughness of the modified concretes can be improved markedly. The interpenetrating structure between the polymeric phase and cement hydrates formed at a $2{\sim}6%$(containing rate of EVA powder). The properties of the polymer modified concretes were influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1055-1063
• /
• 1990

The early hydration characteristics of the system $C_3S-C_3A-C_4AF$ according to the clinker composition variations, in order to establish the mutual interactionof clinker minerals during the portland cement hydration, have been studied. The early hydration rate of $C_3S$ was greatly effected by the change of $C_3S/C_3A$ ratio. The lower the $C_3S/C_3A$ ratio was, the faster the apex reaching time and the rate of heat liberation of the 2nd exothermic peak originating from the formation of $Ca(OH)_2$ were. The effect of $C_3S/C_3A$ ration on the amounts of $Ca(OH)_2$ formation was decreased, in process of hydration time, but the effect of $C_3S$ content was increased.

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.133-138
• /
• 1987

The behavior of CaO and SiO2 in the reaction produced which produced in the early hydration of C3S was studied by XRD and thermal analyzer. Polymerization of hydrated siltcates was also studied by TMS method. TMS derivatives were separated by gaschromatography. Cao/SiO2 molar ratios of the produced CSH gel under the air atmosphere were higher than that in the CO2. Dimerization rate of hydrated silicates was very fast in the early hydration stage. Trimer began to appear later than dimer and its increasing rate was very low. The amount of dimer and trimer formed under the CO2 atmosphere was less than that in the air.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.449-454
• /
• 1988

The effects of salts which was used as a catalysis in formation of $\alpha$-calciumusulfate hemihydrate from dicalcium sulfate hydrate were investigated on the hydration of $\alpha$-calciumsulfate hemihydrate. The hydration of $\alpha$-calciumsulfate hemihydrate was studied by the measurements of crystalline water, heat evolution. Also the hydrates were analyzed by XRD, DSC and SEM. The promotive effect each salts on the hydration was as follows: NaCl>NH4Cl>NaNO3>NH4NO3, and the hydration rate was accelerated with concentration of salts. The effect of Al2(SO4)3 and potassium sodium tartrate on the hydration was slmilar to water, whereas sodium succinate and gelatin retarded the hydration in comparision with water. These salts affected the hydration time but total heat evoution was similar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.140-143
• /
• 2004

Heat of hydration of concrete under different curing temperatures can be characterized with knowledge of the thermal activity, the heat rate at the reference temperature, and the total heat of hydration of the mixture. The so-called multi-component hydration model incorporates the effect of following variables: cement chemical composition, cement fineness, secondary cementitious powders, mixture proportions, and concrete properties. However, the model does not consider the use of silica fume as a secondary cementitious powder. Therefore, the model that quantifies the heat of hydration due to the use of silica fume is needed. In this thesis, the effects of silica fume on heat of hydration are evaluated and the influence on the heat of hydration are also quantified to be included in the model, so that the analysis using modified multi-component hydration model for silica fume concrete provides more accurate results than normal concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1041-1044
• /
• 2008

The addition of chemical inert filler in blended cement, such as limestone or chemical inert silica fume, will produce a physical effect on cement hydration. Due to the high surface area of inert filler in the mixtures, it provides sites for the nucleation and growth of hydration products, thus improving the hydration rate of cement compounds and consequently increasing the strength at early age. This paper proposes a model of hydration of Portland cement blended with chemical inert filler. This model considers the influence of water to cement ratio, cement particle size, cement composition and addition of chemical inert filler on hydration. The heat evolution, degree of hydration and porosity are obtained as accompanied results in hydration process. The prediction results agree well with experiment results.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.861-869
• /
• 1997

In order to investigate the reaction in the system of anhydrite II-blast furnace slag, the paste hydration which made up with a liquid/solid ratio of 0.45 for 1, 3, 7, 14, 28days by the addition of accelerators to 10~30wt.% slag with natural gypsum calcined for 1hour at 500/$700^{\circ}C$ was studied by combined water determination, XRD, DTA, DSC and SEM. As a result of this experiment, it was found that hydration rate was faster in the system calcined at 50$0^{\circ}C$. Therefore the anhydrite was converted to calcium sulfate dihydrate in the hydration for 1day but the slag was not almost reacted. For the gypsum calcined at $700^{\circ}C$, the hydraton rate in the system of K2SO4 addition was faster than others in the earier period, but the activated effect of the system of Al2(SO4)3 addition was regarded as the highest over 3days. As the amount of slag was increased, they dydration rate was delayed and ettringite was observed in the case of K2SO4 system. However both Al2(SO4)3 and AlK(SO4)2 systems showed calcium sulfate dhydrate only as hydrated products.

• 한국식품과학회지
• /
• 제21권2호
• /
• pp.313-319
• /
• 1989

일반계인 올찰과 다수계인 한강찰벼 찹쌀의 수분흡수 특성을 조사하였다. 침지 온도 $4{\sim}40^{\circ}C$에서의 수분흡수 속도상수 값은 한강 찰벼가 올찰보다 작았다. 수분흡수의 활성화 에너지는 올찰이 한강찰벼 보다 다소 큰 값을 보였다. 침지중 부피 증가 속도상수 값은 올찰이 한강찰벼 보다 컸으며, 부피 증가의 활성화 에너지 값도 올찰이 다소 큰 값이었다. 침지에 따른 찹쌀의 경도 감소 속도상수는 침지 온도가 높을수록 큰 값을 보였으나, 시료 간에는 뚜렷한 차이를 보이지 않았다. 침지 시간과 침지 온도와의 관계로부터 구한 z-값과 $Q_{10}$ 값은 각각 $39.7^{\circ}C$ 및 1.78로써 시료간에 차이를 보이지 않았다.

• 한국건축시공학회지
• /
• 제14권3호
• /
• pp.273-284
• /
• 2014

Ultra-high-performance concrete (UHPC) consists of cement, silica fume (SF), sand, fibers, water and superplasticizer. Typical water/binder ratios are 0.15 to 0.20 with 20 to 30% silica fume. In the production of ultra-high performance concrete, a significant temperature rise at an early age can be observed because of the higher cement content per unit mass of concrete. In this paper, by considering the production of calcium hydroxide in cement hydration and its consumption in the pozzolanic reaction, a numerical model is proposed to simulate the hydration of ultra-high performance concrete. The heat evolution rate of UHPC is determined from the contributions of cement hydration and the pozzolanic reaction. Furthermore, by combining a blended-cement hydration model with the finite-element method, the temperature history in the hardening of UHPC is evaluated using the degree of hydration of the cement and the silica fume. The predicted temperature-history curves were compared with experimental data, and a good correlation was found.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.230-231
• /
• 2017

The addition of a limestone filler(LF) to fill into the voids between cement and aggregate particles can reduce the cementitious paste volume. This paper aim to evaluate the influence of LF contents on the hydration kinetics and compressive strength. Hydration kinetics were evaluate using heat of hydration, ignition loss and thermal analysis. The heat of hydration was measured using Isothermal Calorimetry. The degree of hydration was measured using ignition loss. Hydration product analysis was carried out by Thermal Gravimetric and Differential Thermal Analysis. The results show that the addition of LF reduces not only the initial setting time and heat of hydration peak, also degree of hydration and rate of strength development at early age increase with the addition of LF. It can be concluded the LF fills the pore between cement particles due to formation of carboaluminate, which may accelerate the setting of cement pastes.