• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.361-364
• /
• 2008

In this paper, several fields for improving shift quality and mode conversion quality are presented and considered. For a series type hybrid vehicle, improving mode conversion quality is important because it changes its speed with its own motors. A parallel type hybrid vehicle usually has AT or AMT, and its motor and engine can work independently. Therefore, improving both of two qualities is equally important in this case. For a power split type hybrid vehicle, improving mode conversion quality is more important due to the existence of planetary gears which change vehicle's speed.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.192-198
• /
• 2013

The rapidly growing demand for electric power systems in electric vehicles (EVs) and hybrid electric vehicles (HEVs) require simpler, cost-effective, and higher performance components. In this paper, a novel power conversion system for hybrid electric vehicles is proposed for these needs. The proposed power conversion system reduces the conversion system cost while preserving same functionality. The proposed power conversion system can boost multi-sources to drive a traction motor and to store energy at the same time reducing number of switching components. In this paper, all operational modes of the proposed converter are explained in detail and verified by a computer simulation first. Then, the topology and operational modes are experimentally verified. Based on the results, the feasibility of the proposed multi-mode single leg power conversion system for EV and HEV applications is discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.192-194
• /
• 2001

회전기 고정자 권선에서 발생하는 최대 부분 방전의 연속적인 on-line 측정이 가능한 경제적이고 간단한 hybrid conversion scheme이 개발되었다. 또한 기존의 부분 방전 측정 방식인 single channel analyzer 방식, A/D 변환 방식과 대비하여 hybrid conversion scheme의 장단점이 설명되었으며, 부분 방전 측정 주파수 대역과 부분 방전 측정의 dead time의 영향을 분석하였다.

• 한국태양에너지학회 논문집
• /
• 제25권3호
• /
• pp.47-52
• /
• 2005

Normally if sunlight is directed on a solar cell without any increasing in temperature, the amount of absorption energy per unit area of each cell is increasing. In a silicon solar cell. however, cell conversion efficiency decreases with the increase of temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. We tried to design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect and use thermal energy more effectively. We compared performance of this new hybrid panel with current thermal panel. We also evaluated conversion efficiency, thermal capacity and confirmed cooling effects from thermal absorption efficiency.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.85-92
• /
• 2005

One of the most effective methods for utilizing solar energy is to combine thermal solar and optical energy simultaneously using a hybrid panel. Many systems using various kinds of photovoltaic panels have already been constructed. But utilizing solar energy by means of a hybrid panel with concentrator has not been to be attempted yet. Normally if sunlight is directed on the solar cell, and there is no increase in temperature, the absorption energy of each cell will increase per unit area. In a silicon solar cell. however, cell conversion efficiency decreases according to the increasing temperature. Therefore, to maintain cell conversion efficiency under normal condition, it is necessary to keep the cell at operating temperature. we design and make new hybrid panel with cooling system to prevent increasing of temperature on cell, collect effectively thermal energy. We compared performance of new hybrid panel with PV module and thermal panel. We also evaluated conversion efficiency, electric power and thermal capacity and confirmed cooling effect from thermal absorption efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.323-325
• /
• 2007

$TiO_{2}$ electrode electrospun directly onto the substrate was developed for energy conversion device. To enhance energy conversion efficiency of dye-sensitized solar cell, electrodes should have higher surface area to absorb more dyes and higher conductivity to reduce recombination of generated electrons. $TiO_{2}$ nanofibers with higher surface areas were fabricated by annealing electrospun $TiO_{2}/PVP$ nanofibers at $500^{\circ}C$ for 3 hrs in air. it was revealed that $TiO_{2}$ nanofiber electrodes is hybrid with MWNT showed higher conductivity than $TiO_{2}$ semiconductor electrode possibly due to band gap change.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.190.2-190.2
• /
• 2014

We report the origin of the improvement of the power conversion efficiency (PCE) of hybrid thin-film solar cells when a soluble C60 derivative, [6,6]-phenyl-$C_{61}$-butyric acid methyl ester (PCBM), is introduced as a hole-blocking layer. The PCBM layer could establish better interfacial contact by decreasing the reverse ark-saturation current density, resulting in a decrease in the probability of carrier recombination. The power conversion efficiency of this optimized device reached a maximum value of 8.34% and is the highest yet reported for hybrid thin-film solar cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3230-3232
• /
• 1999

In this paper describes the design and improvement of a hybrid module for dual slope A/D converter. Since the input voltage to be converted is very sensitive and small. A/D converter must have the temperature stability. low-drift, and the high-resolution the conversion. A dual slop A/D converter circuit which is controlled by microprocessoer has been developed to reduce the offset voltage and the drift characteristics of operation amplifiers, and to improve the A/D conversion speed. Also hybrid module has been adapted to obtain the to obtain the stable and accurate A/D conversion for low cost use. The evaluation of the designed hybrid module has been shown as having a good performance, which will give usefull application to the industrial measurements use.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1534-1540
• /
• 2005

직접 변환 방식은 혼합기를 사용하는 구조와 6-단자 회로를 사용하는 구조를 갖는다. 6-단자 회로를 사용하는 방식은 혼합기를 이용하는 방식보다 회로 구조가 간단하고 집적화도 쉬운 장점을 가지고 있다. 그리고 다이오드 작동을 위한 전압이 혼합기를 작동시키기 위한 전압보다 낮은 장점을 가지고 있으며 LO에서의 소비전력이 낮고 광대역으로 구현하기 유리한 점을 보이고 있다. 본 논문에서는 branch-line 결합기로 구성되는 6-단자 회로와 ring hybrid 결합기로 구성되는 6-단자 회로를 설계하고 성능을 비교 분석하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.481-484
• /
• 2005

직접 변환 방식은 혼합기를 사용하는 구조와 6-단자 회로를 사용하는 구조를 갖는다. 6-단자 회로를 사용하는 방식은 혼합기를 이용하는 방식보다 회로 구조가 간단하고 집적화도 쉬운 장점을 가지고 있다. 그리고 다이오드 작동을 위한 전압이 혼합기를 작동시키기 위한 전압보다 낮은 장점을 가지고 있으며 LO에서의 소비전력이 낮고 광대역으로 구현하기 유리한 점을 보이고 있다. 본 논문에서는 branch-line 결합기로 구성되는 6-단자 회로와 ring hybrid 결합기로 구성되는 6-단자 회로를 설계하고 성능을 비교분석하였다.